Re: [PATCH 1/3 v2] sdhci: Add auto CMD12 support for eSDHC driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 04, 2010 at 07:02:56PM -0600, Grant Likely wrote:
> On Mon, Aug 2, 2010 at 9:11 PM, Roy Zang <tie-fei.zang@xxxxxxxxxxxxx> wrote:
> > From: Jerry Huang <Chang-Ming.Huang@xxxxxxxxxxxxx>
> >
> > Add auto CMD12 command support for eSDHC driver.
> > This is needed by P4080 and P1022 for block read/write.
> > Manual asynchronous CMD12 abort operation causes protocol violations on
> > these silicons.
> >
> > Signed-off-by: Jerry Huang <Chang-Ming.Huang@xxxxxxxxxxxxx>
> > Signed-off-by: Roy Zang <tie-fei.zang@xxxxxxxxxxxxx>
> > ---
> >  drivers/mmc/host/sdhci-of-core.c |    4 ++++
> >  drivers/mmc/host/sdhci.c         |   14 ++++++++++++--
> >  drivers/mmc/host/sdhci.h         |    2 ++
> >  3 files changed, 18 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> > index c6d1bd8..a92566e 100644
> > --- a/drivers/mmc/host/sdhci.c
> > +++ b/drivers/mmc/host/sdhci.c
> > @@ -817,8 +817,12 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
> >        WARN_ON(!host->data);
> >
> >        mode = SDHCI_TRNS_BLK_CNT_EN;
> > -       if (data->blocks > 1)
> > -               mode |= SDHCI_TRNS_MULTI;
> > +       if (data->blocks > 1) {
> > +               if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
> > +                       mode |= SDHCI_TRNS_MULTI | SDHCI_TRNS_ACMD12;
> > +               else
> > +                       mode |= SDHCI_TRNS_MULTI;
> 
> nit:
> +               mode |= SDHCI_TRNS_MULTI;
> +               if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
> +                       mode |= SDHCI_TRNS_ACMD12;
> 
> Clearer, no?

Much clearer. I would prefer the nit incorporated.

Another nit:

> @@ -154,6 +154,10 @@ static int __devinit sdhci_of_probe(struct of_device *ofdev,
>                 host->ops = &sdhci_of_data->ops;
>         }
> 
> +       if (of_get_property(np, "sdhci,auto-cmd12", NULL))
> +               host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
> +
> +      

^^ No need for the two empty lines.

>        if (of_get_property(np, "sdhci,1-bit-only", NULL))

Though, technically the patch looks OK, feel free to add my

  Acked-by: Anton Vorontsov <cbouatmailru@xxxxxxxxx>

on the next resend (if any).

Thanks Roy!

-- 
Anton Vorontsov
email: cbouatmailru@xxxxxxxxx
irc://irc.freenode.net/bd2
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux