+ dts-add-sdhciauto-cmd12-field-for-p4080-device-tree.patch added to -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled
     dts: add sdhci,auto-cmd12 field for p4080 device tree
has been added to the -mm tree.  Its filename is
     dts-add-sdhciauto-cmd12-field-for-p4080-device-tree.patch

Before you just go and hit "reply", please:
   a) Consider who else should be cc'ed
   b) Prefer to cc a suitable mailing list as well
   c) Ideally: find the original patch on the mailing list and do a
      reply-to-all to that, adding suitable additional cc's

*** Remember to use Documentation/SubmitChecklist when testing your code ***

See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this

The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/

------------------------------------------------------
Subject: dts: add sdhci,auto-cmd12 field for p4080 device tree
From: Roy Zang <tie-fei.zang@xxxxxxxxxxxxx>

Signed-off-by: Roy Zang <tie-fei.zang@xxxxxxxxxxxxx>
Cc: Jerry Huang <Chang-Ming.Huang@xxxxxxxxxxxxx>
Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Cc: Kumar Gala <galak@xxxxxxxxxxxxxxxxx>
Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
Cc: <linux-mmc@xxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 Documentation/powerpc/dts-bindings/fsl/esdhc.txt |    2 ++
 arch/powerpc/boot/dts/p4080ds.dts                |    1 +
 2 files changed, 3 insertions(+)

diff -puN Documentation/powerpc/dts-bindings/fsl/esdhc.txt~dts-add-sdhciauto-cmd12-field-for-p4080-device-tree Documentation/powerpc/dts-bindings/fsl/esdhc.txt
--- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt~dts-add-sdhciauto-cmd12-field-for-p4080-device-tree
+++ a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
@@ -14,6 +14,8 @@ Required properties:
     reports inverted write-protect state;
   - sdhci,1-bit-only : (optional) specifies that a controller can
     only handle 1-bit data transfers.
+  - sdhci,auto-cmd12: (optional) specifies that a controller can
+    only handle auto CMD12.
 
 Example:
 
diff -puN arch/powerpc/boot/dts/p4080ds.dts~dts-add-sdhciauto-cmd12-field-for-p4080-device-tree arch/powerpc/boot/dts/p4080ds.dts
--- a/arch/powerpc/boot/dts/p4080ds.dts~dts-add-sdhciauto-cmd12-field-for-p4080-device-tree
+++ a/arch/powerpc/boot/dts/p4080ds.dts
@@ -280,6 +280,7 @@
 			reg = <0x114000 0x1000>;
 			interrupts = <48 2>;
 			interrupt-parent = <&mpic>;
+			sdhci,auto-cmd12;
 		};
 
 		i2c@118000 {
_

Patches currently in -mm which might be from tie-fei.zang@xxxxxxxxxxxxx are

sdhci-add-auto-cmd12-support-for-esdhc-driver.patch
dts-add-sdhciauto-cmd12-field-for-p4080-device-tree.patch
dts-add-esdhc-weird-voltage-bits-workaround.patch
rtc-add-support-for-ds3232-rtc.patch
rtc-add-support-for-ds3232-rtc-fix.patch

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux