From: Hyuk Lee <hyuk1.lee@xxxxxxxxxxx>
On Samsung's SDMMC hosts the timeout clock is derivied from the SD Clock
which is set dynamically. So checked SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
quirk and removed 'sdhci_s3c_get_timeout_clk' callback which doesn't need
any more.
Signed-off-by: Hyuk Lee <hyuk1.lee@xxxxxxxxxxx>
Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
---
The submitted v1 patch looks missed...so re-sending...
Hi Andrew,
If no problems, could you please apply this patch?
Changes since v1:
- re-made this patch againt mmotm-20100720
drivers/mmc/host/sdhci-s3c.c | 10 +++-------
1 files changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 0d25285..48fd161 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -113,11 +113,6 @@ static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
return max;
}
-static unsigned int sdhci_s3c_get_timeout_clk(struct sdhci_host *host)
-{
- return sdhci_s3c_get_max_clk(host) / 1000000;
-}
-
/**
* sdhci_s3c_consider_clock - consider one the bus clocks for current setting
* @ourhost: Our SDHCI instance.
@@ -191,7 +186,6 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
ourhost->cur_clk = best_src;
host->max_clk = clk_get_rate(clk);
- host->timeout_clk = sdhci_s3c_get_timeout_clk(host);
ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
@@ -240,7 +234,6 @@ static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
static struct sdhci_ops sdhci_s3c_ops = {
.get_max_clock = sdhci_s3c_get_max_clk,
- .get_timeout_clock = sdhci_s3c_get_timeout_clk,
.set_clock = sdhci_s3c_set_clock,
.get_min_clock = sdhci_s3c_get_min_clock,
};
@@ -408,6 +401,9 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
SDHCI_QUIRK_32BIT_DMA_SIZE);
+ /* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
+ host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
+
ret = sdhci_add_host(host);
if (ret) {
dev_err(dev, "sdhci_add_host() failed\n");
--
1.6.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
