> -----Original Message----- > From: linux-mmc-owner@xxxxxxxxxxxxxxx [mailto:linux-mmc- > owner@xxxxxxxxxxxxxxx] On Behalf Of Ohad Ben-Cohen > Sent: Tuesday, July 06, 2010 6:08 AM > To: linux-wireless@xxxxxxxxxxxxxxx; linux-mmc@xxxxxxxxxxxxxxx; linux- > omap@xxxxxxxxxxxxxxx > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux@xxxxxxxxxxxxxxxx; > Chikkature Rajashekar, Madhusudhan; Luciano Coelho; akpm@linux- > foundation.org; San Mehat; Ben-cohen, Ohad > Subject: [PATCH 15/15] omap: zoom: enable WLAN device > > From: Ohad Ben-Cohen <ohadb@xxxxxx> > > Make it possible to build and use TI's wl1271 > device on the ZOOM boards. > > The device is an embedded SDIO WLAN chip > that is hardwired to the 3rd mmc controller > of the ZOOM2/3 boards. > > Signed-off-by: Ohad Ben-Cohen <ohadb@xxxxxx> > --- > arch/arm/mach-omap2/Kconfig | 5 +++++ > arch/arm/mach-omap2/Makefile | 1 + > arch/arm/mach-omap2/board-zoom-peripherals.c | 15 +++++++++++++++ > 3 files changed, 21 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index b31b6f1..7fee11b 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -131,6 +131,11 @@ config MACH_OMAP_ZOOM3 > depends on ARCH_OMAP3 > select OMAP_PACKAGE_CBP > > +config OMAP_ZOOM_WLAN > + bool "OMAP Zoom board WLAN support" > + depends on MACH_OMAP_ZOOM2 || MACH_OMAP_ZOOM3 > + select MMC_EMBEDDED_SDIO > + > config MACH_CM_T35 > bool "CompuLab CM-T35 module" > depends on ARCH_OMAP3 > diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile > index ea52b03..ac1bad9 100644 > --- a/arch/arm/mach-omap2/Makefile > +++ b/arch/arm/mach-omap2/Makefile > @@ -129,6 +129,7 @@ obj-$(CONFIG_MACH_OMAP_ZOOM3) += board- > zoom3.o \ > board-zoom-peripherals.o \ > hsmmc.o \ > board-zoom-debugboard.o > +obj-y += board-zoom-wlan.o > obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \ > board-zoom-peripherals.o \ > hsmmc.o > diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach- > omap2/board-zoom-peripherals.c > index 6b39849..3128cd4 100644 > --- a/arch/arm/mach-omap2/board-zoom-peripherals.c > +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c > @@ -16,11 +16,13 @@ > #include <linux/gpio.h> > #include <linux/i2c/twl.h> > #include <linux/regulator/machine.h> > +#include <linux/mmc/host.h> > > #include <asm/mach-types.h> > #include <asm/mach/arch.h> > #include <asm/mach/map.h> > > +#include <mach/board-zoom.h> > #include <plat/common.h> > #include <plat/usb.h> > > @@ -168,6 +170,18 @@ static struct omap2_hsmmc_info mmc[] __initdata = { > .nonremovable = true, > .power_saving = true, > }, > +#ifdef CONFIG_OMAP_ZOOM_WLAN > + { > + .mmc = 3, > + .wires = 4, > + .gpio_cd = -EINVAL, > + .gpio_wp = -EINVAL, > + .register_embedded_control = > + omap_zoom_wlan_register_embedded_control, > + .virtual_get_cd = omap_zoom_wlan_get_virtual_cd, > + .ocr_mask = MMC_VDD_165_195, > + }, > +#endif > {} /* Terminator */ > }; > > @@ -282,4 +296,5 @@ void __init zoom_peripherals_init(void) > omap_i2c_init(); > usb_musb_init(&musb_board_data); > enable_board_wakeup_source(); > + omap_zoom_wlan_init(); > } [Ghorai] In general we can avoid OMAP_ZOOM_WLAN and MMC_EMBEDDED_SDIO as kconfig option. 1st one is board specific and 2nd one could be generic sdio code. As I mentioned in other patch too. > -- > 1.7.0.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html