> -----Original Message----- > From: linux-mmc-owner@xxxxxxxxxxxxxxx [mailto:linux-mmc- > owner@xxxxxxxxxxxxxxx] On Behalf Of Ohad Ben-Cohen > Sent: Tuesday, July 06, 2010 6:08 AM > To: linux-wireless@xxxxxxxxxxxxxxx; linux-mmc@xxxxxxxxxxxxxxx; linux- > omap@xxxxxxxxxxxxxxx > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux@xxxxxxxxxxxxxxxx; > Chikkature Rajashekar, Madhusudhan; Luciano Coelho; akpm@linux- > foundation.org; San Mehat; Ben-cohen, Ohad > Subject: [PATCH 06/15] omap zoom2: wlan board muxing > > From: Ohad Ben-Cohen <ohadb@xxxxxx> > > Add board muxing to support the wlan wl1271 chip that is > hardwired to mmc2 (third mmc controller) on the ZOOM2. > > Signed-off-by: Ohad Ben-Cohen <ohadb@xxxxxx> > --- > arch/arm/mach-omap2/board-zoom2.c | 15 +++++++++++++++ > 1 files changed, 15 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach- > omap2/board-zoom2.c > index 803ef14..00871be 100644 > --- a/arch/arm/mach-omap2/board-zoom2.c > +++ b/arch/arm/mach-omap2/board-zoom2.c > @@ -71,6 +71,21 @@ static struct twl4030_platform_data zoom2_twldata = { > > #ifdef CONFIG_OMAP_MUX > static struct omap_board_mux board_mux[] __initdata = { > +#ifdef CONFIG_OMAP_ZOOM_WLAN [Ghorai] This is zoom board specific file, So why need this additional flag? > + /* WLAN IRQ - GPIO 162 */ > + OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), > + /* WLAN POWER ENABLE - GPIO 101 */ > + OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), > + /* WLAN SDIO: MMC3 CMD */ > + OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP), > + /* WLAN SDIO: MMC3 CLK */ > + OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), > + /* WLAN SDIO: MMC3 DAT[0-3] */ > + OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), > + OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), > + OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), > + OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), > +#endif > { .reg_offset = OMAP_MUX_TERMINATOR }, > }; > #else > -- > 1.7.0.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
