This patch add support for SDHCI blocks on Samsung Aquila board. The
following host controllers are defined:
1. Internal MoviNAND device (permanently wired to the controller)
2. Internal WiFI SDIO device (card is activated by power regualor)
3. External MMC/SD socket (card detection is provided by external
gpio interrupt)
Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
arch/arm/mach-s5pv210/Kconfig | 4 +++
arch/arm/mach-s5pv210/mach-aquila.c | 43 +++++++++++++++++++++++++++++++++++
2 files changed, 47 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 0761eac..f48d70a 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -50,7 +50,11 @@ config MACH_AQUILA
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
select S5PV210_SETUP_FB_24BPP
+ select S5PV210_SETUP_SDHCI
select S3C_DEV_FB
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
help
Machine support for the Samsung Aquila target based on S5PC110 SoC
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 10bc76e..a616498 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/fb.h>
+#include <linux/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -22,12 +23,15 @@
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/regs-fb.h>
+#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+#include <plat/sdhci.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -116,8 +120,44 @@ static struct s3c_fb_platdata aquila_lcd_pdata __initdata = {
.setup_gpio = s5pv210_fb_gpio_setup_24bpp,
};
+/* MoviNAND */
+static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_PERMANENT,
+};
+
+/* Wireless LAN */
+static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_EXTERNAL,
+ /* ext_cd_{init,cleanup} callbacks will be added later */
+};
+
+/* External Flash */
+#define AQUILA_EXT_FLASH_EN S5PV210_MP05(4)
+#define AQUILA_EXT_FLASH_CD S5PV210_GPH3(4)
+static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = AQUILA_EXT_FLASH_CD,
+ .ext_cd_gpio_invert = 1,
+};
+
+static void aquila_setup_sdhci()
+{
+ gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN");
+ gpio_direction_output(AQUILA_EXT_FLASH_EN, 1);
+
+ s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
+ s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);
+ s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
+};
+
static struct platform_device *aquila_devices[] __initdata = {
&s3c_device_fb,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
};
static void __init aquila_map_io(void)
@@ -129,6 +169,9 @@ static void __init aquila_map_io(void)
static void __init aquila_machine_init(void)
{
+ /* SDHCI */
+ aquila_setup_sdhci();
+
/* FB */
s3c_fb_set_platdata(&aquila_lcd_pdata);
--
1.7.1.240.g225c
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
