Re: [PATCH 2/3] ARM: S5PV210: Add support SDMMC WP through EXT_INT on SMDKV210

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Op 15-06-10 13:27, Kukjin Kim schreef:
> From: Lee Hyuk <hyuk1.lee@xxxxxxxxxxx>
>
> S5PV210 HSMMC host controller doesn't have the Write Protection pin which
> should be connnected with SDMMC card WP pin. So allocated a GPIO in order to
> get the data from SDMMC card WP pin with EXT_INT and implement get_ro and
> cfg_wp function.
>
> Signed-off-by: Hyuk Lee <hyuk1.lee@xxxxxxxxxxx>
> Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
> ---
>  arch/arm/mach-s5pv210/mach-smdkv210.c |    2 +
>  arch/arm/mach-s5pv210/setup-sdhci.c   |   72 +++++++++++++++++++++++++++++++++
>  2 files changed, 74 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
> index b08f376..18cdb8c 100644
> --- a/arch/arm/mach-s5pv210/mach-smdkv210.c
> +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
> @@ -27,6 +27,7 @@
>  #include <plat/cpu.h>
>  #include <plat/adc.h>
>  #include <plat/ts.h>
> +#include <plat/sdhci.h>
>  
>  /* Following are default values for UCON, ULCON and UFCON UART registers */
>  #define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
> @@ -101,6 +102,7 @@ static void __init smdkv210_map_io(void)
>  static void __init smdkv210_machine_init(void)
>  {
>  	s3c24xx_ts_set_platdata(&s3c_ts_platform);
> +	s3c_sdhci_set_platdata();
>   

Wouldn't it be better to name this s5pv210_sdhci_set_platdata() ?
Also, see below.

>  	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
>  }
>  
> diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c
> index 51815ec..b553b36 100644
> --- a/arch/arm/mach-s5pv210/setup-sdhci.c
> +++ b/arch/arm/mach-s5pv210/setup-sdhci.c
> @@ -15,13 +15,17 @@
>  #include <linux/interrupt.h>
>  #include <linux/platform_device.h>
>  #include <linux/io.h>
> +#include <linux/gpio.h>
>  
>  #include <linux/mmc/card.h>
>  #include <linux/mmc/host.h>
>  
> +#include <plat/gpio-cfg.h>
>  #include <plat/regs-sdhci.h>
>  #include <plat/sdhci.h>
>  
> +#include <mach/map.h>
> +
>  /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
>  
>  char *s5pv210_hsmmc_clksrcs[4] = {
> @@ -61,3 +65,71 @@ void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
>  	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
>  	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
>  }
> +
> +static int s5pv210_sdhci_get_ro(struct mmc_host *mmc)
> +{
> +	int gpio_dat;
> +
> +	if ((mmc->index == 0 && s3c_hsmmc0_def_platdata.cfg_wp != NULL) ||
> +		(mmc->index == 1 && s3c_hsmmc1_def_platdata.cfg_wp != NULL)) {
> +		gpio_dat = __raw_readl((S5P_VA_GPIO + 0xC00) + 0x04);
> +		return !!(gpio_dat & 0x80);
> +	} else if (mmc->index == 2 && s3c_hsmmc2_def_platdata.cfg_wp != NULL) {
> +		gpio_dat = __raw_readl((S5P_VA_GPIO + 0xC00) + 0x64);
> +		return !!(gpio_dat & 0x2);
> +	} else if (mmc->index == 3 && s3c_hsmmc3_def_platdata.cfg_wp != NULL) {
> +		gpio_dat = __raw_readl((S5P_VA_GPIO + 0xC00) + 0x24);
> +		return !!(gpio_dat & 0x1);
> +	} else
> +		return 0;
> +}
> +
> +static void s5pv210_setup_sdhci_gpio_wp(int dev_id)
> +{
> +	switch (dev_id) {
> +	case 0:
> +	case 1:
> +		s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_INPUT);
> +		s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
> +		break;
> +	case 2:
> +		s3c_gpio_cfgpin(S5PV210_GPH3(1), S3C_GPIO_INPUT);
> +		s3c_gpio_setpull(S5PV210_GPH3(1), S3C_GPIO_PULL_UP);
> +		break;
> +	case 3:
> +		s3c_gpio_cfgpin(S5PV210_GPH1(0), S3C_GPIO_INPUT);
> +		s3c_gpio_setpull(S5PV210_GPH1(0), S3C_GPIO_PULL_UP);
> +		break;
> +	default:
> +		break;
> +	}
> +}
> +
> +static struct s3c_sdhci_platdata hsmmc0_platdata = {
> +	.cfg_wp         = s5pv210_setup_sdhci_gpio_wp,
> +	.get_ro         = s5pv210_sdhci_get_ro,
> +};
> +
> +static struct s3c_sdhci_platdata hsmmc1_platdata = {
> +	.cfg_wp         = s5pv210_setup_sdhci_gpio_wp,
> +	.get_ro         = s5pv210_sdhci_get_ro,
> +};
> +
> +static struct s3c_sdhci_platdata hsmmc2_platdata = {
> +	.cfg_wp         = s5pv210_setup_sdhci_gpio_wp,
> +	.get_ro         = s5pv210_sdhci_get_ro,
> +};
> +
> +static struct s3c_sdhci_platdata hsmmc3_platdata = {
> +	.cfg_wp         = s5pv210_setup_sdhci_gpio_wp,
> +	.get_ro         = s5pv210_sdhci_get_ro,
> +};
> +
> +void s3c_sdhci_set_platdata(void)
> +{
> +	s3c_sdhci0_set_platdata(&hsmmc0_platdata);
> +	s3c_sdhci1_set_platdata(&hsmmc1_platdata);
> +	s3c_sdhci2_set_platdata(&hsmmc2_platdata);
> +	s3c_sdhci3_set_platdata(&hsmmc3_platdata);
> +}
> +EXPORT_SYMBOL(s3c_sdhci_set_platdata);
>   

Why do you export this function? I don't see this being used anywhere
except in mach-s5pv210.

-- 
Maurus Cuelenaere

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux