>From 4b79c6ed22da18382748f578f9b4beb2d51afef3 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= <mirq-linux@xxxxxxxxxxxx>
Date: Fri, 4 Jun 2010 21:37:00 +0200
Subject: [PATCH 1/2] mmc: split mmc_sd_init_card()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Prepare for SD-combo (IO+mem) support by splitting SD memory
card init and related functions.
Signed-off-by: MichaÅ? MirosÅ?aw <mirq-linux@xxxxxxxxxxxx>
---
drivers/mmc/core/sd.c | 249 +++++++++++++++++++++++++++--------------------
drivers/mmc/core/sd.h | 17 +++
drivers/mmc/core/sdio.c | 39 +++++---
3 files changed, 186 insertions(+), 119 deletions(-)
create mode 100644 drivers/mmc/core/sd.h
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 5eac21d..840be1b 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -59,7 +59,7 @@ static const unsigned int tacc_mant[] = {
/*
* Given the decoded CSD structure, decode the raw CID to our CID structure.
*/
-static void mmc_decode_cid(struct mmc_card *card)
+void mmc_decode_cid(struct mmc_card *card)
{
u32 *resp = card->raw_cid;
@@ -238,7 +238,7 @@ out:
/*
* Test if the card supports high-speed mode and, if so, switch to it.
*/
-static int mmc_switch_hs(struct mmc_card *card)
+int mmc_sd_switch_hs(struct mmc_card *card)
{
int err;
u8 *status;
@@ -272,9 +272,9 @@ static int mmc_switch_hs(struct mmc_card *card)
printk(KERN_WARNING "%s: Problem switching card "
"into high-speed mode!\n",
mmc_hostname(card->host));
+ err = 0;
} else {
- mmc_card_set_highspeed(card);
- mmc_set_timing(card->host, MMC_TIMING_SD_HS);
+ err = 1;
}
out:
@@ -320,26 +320,16 @@ static const struct attribute_group *sd_attr_groups[] = {
NULL,
};
-static struct device_type sd_type = {
+struct device_type sd_type = {
.groups = sd_attr_groups,
};
/*
- * Handle the detection and initialisation of a card.
- *
- * In the case of a resume, "oldcard" will contain the card
- * we're trying to reinitialise.
+ * Fetch CID from card.
*/
-static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
- struct mmc_card *oldcard)
+int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid)
{
- struct mmc_card *card;
int err;
- u32 cid[4];
- unsigned int max_dtr;
-
- BUG_ON(!host);
- WARN_ON(!host->claimed);
/*
* Since we're changing the OCR value, we seem to
@@ -361,23 +351,136 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
err = mmc_send_app_op_cond(host, ocr, NULL);
if (err)
- goto err;
+ return err;
- /*
- * Fetch CID from card.
- */
if (mmc_host_is_spi(host))
err = mmc_send_cid(host, cid);
else
err = mmc_all_send_cid(host, cid);
+
+ return err;
+}
+
+int mmc_sd_get_csd(struct mmc_host *host, struct mmc_card *card)
+{
+ int err;
+
+ /*
+ * Fetch CSD from card.
+ */
+ err = mmc_send_csd(card, card->raw_csd);
if (err)
- goto err;
+ return err;
- if (oldcard) {
- if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0) {
- err = -ENOENT;
- goto err;
+ err = mmc_decode_csd(card);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
+ bool reinit)
+{
+ int err;
+
+ if (!reinit) {
+ /*
+ * Fetch SCR from card.
+ */
+ err = mmc_app_send_scr(card, card->raw_scr);
+ if (err)
+ return err;
+
+ err = mmc_decode_scr(card);
+ if (err)
+ return err;
+
+ /*
+ * Fetch switch information from card.
+ */
+ err = mmc_read_switch(card);
+ if (err)
+ return err;
+ }
+
+ /*
+ * For SPI, enable CRC as appropriate.
+ * This CRC enable is located AFTER the reading of the
+ * card registers because some SDHC cards are not able
+ * to provide valid CRCs for non-512-byte blocks.
+ */
+ if (mmc_host_is_spi(host)) {
+ err = mmc_spi_set_crc(host, use_spi_crc);
+ if (err)
+ return err;
+ }
+
+ /*
+ * Check if read-only switch is active.
+ */
+ if (!reinit) {
+ int ro = -1;
+
+ if (host->ops->get_ro)
+ ro = host->ops->get_ro(host);
+
+ if (ro < 0) {
+ printk(KERN_WARNING "%s: host does not "
+ "support reading read-only "
+ "switch. assuming write-enable.\n",
+ mmc_hostname(host));
+ } else if (ro > 0) {
+ mmc_card_set_readonly(card);
}
+ }
+
+ return 0;
+}
+
+unsigned mmc_sd_get_max_clock(struct mmc_card *card)
+{
+ unsigned max_dtr = (unsigned int)-1;
+
+ if (mmc_card_highspeed(card)) {
+ if (max_dtr > card->sw_caps.hs_max_dtr)
+ max_dtr = card->sw_caps.hs_max_dtr;
+ } else if (max_dtr > card->csd.max_dtr) {
+ max_dtr = card->csd.max_dtr;
+ }
+
+ return max_dtr;
+}
+
+void mmc_sd_go_highspeed(struct mmc_card *card)
+{
+ mmc_card_set_highspeed(card);
+ mmc_set_timing(card->host, MMC_TIMING_SD_HS);
+}
+
+/*
+ * Handle the detection and initialisation of a card.
+ *
+ * In the case of a resume, "oldcard" will contain the card
+ * we're trying to reinitialise.
+ */
+static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
+ struct mmc_card *oldcard)
+{
+ struct mmc_card *card;
+ int err;
+ u32 cid[4];
+
+ BUG_ON(!host);
+ WARN_ON(!host->claimed);
+
+ err = mmc_sd_get_cid(host, ocr, cid);
+ if (err)
+ return err;
+
+ if (oldcard) {
+ if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0)
+ return -ENOENT;
card = oldcard;
} else {
@@ -385,10 +488,8 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
* Allocate card structure.
*/
card = mmc_alloc_card(host, &sd_type);
- if (IS_ERR(card)) {
- err = PTR_ERR(card);
- goto err;
- }
+ if (IS_ERR(card))
+ return PTR_ERR(card);
card->type = MMC_TYPE_SD;
memcpy(card->raw_cid, cid, sizeof(card->raw_cid));
@@ -400,22 +501,15 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
if (!mmc_host_is_spi(host)) {
err = mmc_send_relative_addr(host, &card->rca);
if (err)
- goto free_card;
+ return err;
mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
}
if (!oldcard) {
- /*
- * Fetch CSD from card.
- */
- err = mmc_send_csd(card, card->raw_csd);
+ err = mmc_sd_get_csd(host, card);
if (err)
- goto free_card;
-
- err = mmc_decode_csd(card);
- if (err)
- goto free_card;
+ return err;
mmc_decode_cid(card);
}
@@ -426,61 +520,26 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
if (!mmc_host_is_spi(host)) {
err = mmc_select_card(card);
if (err)
- goto free_card;
- }
-
- if (!oldcard) {
- /*
- * Fetch SCR from card.
- */
- err = mmc_app_send_scr(card, card->raw_scr);
- if (err)
- goto free_card;
-
- err = mmc_decode_scr(card);
- if (err < 0)
- goto free_card;
-
- /*
- * Fetch switch information from card.
- */
- err = mmc_read_switch(card);
- if (err)
- goto free_card;
+ return err;
}
- /*
- * For SPI, enable CRC as appropriate.
- * This CRC enable is located AFTER the reading of the
- * card registers because some SDHC cards are not able
- * to provide valid CRCs for non-512-byte blocks.
- */
- if (mmc_host_is_spi(host)) {
- err = mmc_spi_set_crc(host, use_spi_crc);
- if (err)
- goto free_card;
- }
+ err = mmc_sd_setup_card(host, card, oldcard != NULL);
+ if (err)
+ goto free_card;
/*
* Attempt to change to high-speed (if supported)
*/
- err = mmc_switch_hs(card);
- if (err)
+ err = mmc_sd_switch_hs(card);
+ if (err > 0)
+ mmc_sd_go_highspeed(card);
+ else if (err)
goto free_card;
/*
- * Compute bus speed.
+ * Set bus speed.
*/
- max_dtr = (unsigned int)-1;
-
- if (mmc_card_highspeed(card)) {
- if (max_dtr > card->sw_caps.hs_max_dtr)
- max_dtr = card->sw_caps.hs_max_dtr;
- } else if (max_dtr > card->csd.max_dtr) {
- max_dtr = card->csd.max_dtr;
- }
-
- mmc_set_clock(host, max_dtr);
+ mmc_set_clock(host, mmc_sd_get_max_clock(card));
/*
* Switch to wider bus (if supported).
@@ -494,30 +553,12 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
mmc_set_bus_width(host, MMC_BUS_WIDTH_4);
}
- /*
- * Check if read-only switch is active.
- */
- if (!oldcard) {
- if (!host->ops->get_ro || host->ops->get_ro(host) < 0) {
- printk(KERN_WARNING "%s: host does not "
- "support reading read-only "
- "switch. assuming write-enable.\n",
- mmc_hostname(host));
- } else {
- if (host->ops->get_ro(host) > 0)
- mmc_card_set_readonly(card);
- }
- }
-
- if (!oldcard)
- host->card = card;
-
+ host->card = card;
return 0;
free_card:
if (!oldcard)
mmc_remove_card(card);
-err:
return err;
}
diff --git a/drivers/mmc/core/sd.h b/drivers/mmc/core/sd.h
new file mode 100644
index 0000000..3d8800f
--- /dev/null
+++ b/drivers/mmc/core/sd.h
@@ -0,0 +1,17 @@
+#ifndef _MMC_CORE_SD_H
+#define _MMC_CORE_SD_H
+
+#include <linux/mmc/card.h>
+
+extern struct device_type sd_type;
+
+int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid);
+int mmc_sd_get_csd(struct mmc_host *host, struct mmc_card *card);
+void mmc_decode_cid(struct mmc_card *card);
+int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
+ bool reinit);
+unsigned mmc_sd_get_max_clock(struct mmc_card *card);
+int mmc_sd_switch_hs(struct mmc_card *card);
+void mmc_sd_go_highspeed(struct mmc_card *card);
+
+#endif
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 2dd4cfe..8a97e99 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -18,6 +18,7 @@
#include "core.h"
#include "bus.h"
+#include "sd.h"
#include "sdio_bus.h"
#include "mmc_ops.h"
#include "sd_ops.h"
@@ -245,10 +246,26 @@ static int sdio_enable_hs(struct mmc_card *card)
if (ret)
return ret;
- mmc_card_set_highspeed(card);
- mmc_set_timing(card->host, MMC_TIMING_SD_HS);
+ return 1;
+}
- return 0;
+static unsigned mmc_sdio_get_max_clock(struct mmc_card *card)
+{
+ unsigned max_dtr;
+
+ if (mmc_card_highspeed(card)) {
+ /*
+ * The SDIO specification doesn't mention how
+ * the CIS transfer speed register relates to
+ * high-speed, but it seems that 50 MHz is
+ * mandatory.
+ */
+ max_dtr = 50000000;
+ } else {
+ max_dtr = card->cis.max_dtr;
+ }
+
+ return max_dtr;
}
/*
@@ -345,23 +362,15 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
* Switch to high-speed (if supported).
*/
err = sdio_enable_hs(card);
- if (err)
+ if (err > 0)
+ mmc_sd_go_highspeed(card);
+ else if (err)
goto remove;
/*
* Change to the card's maximum speed.
*/
- if (mmc_card_highspeed(card)) {
- /*
- * The SDIO specification doesn't mention how
- * the CIS transfer speed register relates to
- * high-speed, but it seems that 50 MHz is
- * mandatory.
- */
- mmc_set_clock(host, 50000000);
- } else {
- mmc_set_clock(host, card->cis.max_dtr);
- }
+ mmc_set_clock(host, mmc_sdio_get_max_clock(card));
/*
* Switch to wider bus (if supported).
--
1.6.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
