Re: [PATCH] mmc-omap: Add support for 16-bit and 32-bit registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andrew,

* Cory Maccarrone <darkstar6262@xxxxxxxxx> [100307 09:44]:
> From: Marek Belisko <marek.belisko@xxxxxxxxxxxxxxx>
> 
> The omap850 and omap730 use 16-bit registers instead of 32-bit, requiring
> a modification of the register addresses in the mmc-omap driver.  To resolve
> this, a bit shift is performed on base register addresses, either by 1 or 2
> bits depending on the CPU in use.  This yields the correct registers for
> each CPU.
> 
> Signed-off-by: Marek Belisko <marek.belisko@xxxxxxxxxxxxxxx>
> Signed-off-by: Cory Maccarrone <darkstar6262@xxxxxxxxx>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>

Can you please queue this patch too? Ben's comments in this thread
were for the i2c-omap, not for this MMC patch. We've had this patch
in the omap tree for testing for quite a while now.

The patch is also available in at:

https://patchwork.kernel.org/patch/83971/

with the direct link to the mbox being:

https://patchwork.kernel.org/patch/83971/mbox/

Regards,

Tony


>  drivers/mmc/host/omap.c |   62 +++++++++++++++++++++++++----------------------
>  1 files changed, 33 insertions(+), 29 deletions(-)
> 
> This is a resubmit of a patch I sent in several months ago.  Tony Lindgren merged
> this into linux-omap's master and testing branches but has stated that he will not
> merge it further as linux-mmc needs to approve this.  There hasn't been any comments
> raised on either of the linux-omap or linux-mmc mailing lists about problems.  Due to
> the unique nature of the omap7xx platform, this patch is required for MMC card access.
> Is there any chance this can be included into the next -rc cycle, as it is a fix for
> devices that have 16-bit registers?
> 
> diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
> index c6d7e8e..53362c4 100644
> --- a/drivers/mmc/host/omap.c
> +++ b/drivers/mmc/host/omap.c
> @@ -38,30 +38,30 @@
>  #include <plat/fpga.h>
>  
>  #define	OMAP_MMC_REG_CMD	0x00
> -#define	OMAP_MMC_REG_ARGL	0x04
> -#define	OMAP_MMC_REG_ARGH	0x08
> -#define	OMAP_MMC_REG_CON	0x0c
> -#define	OMAP_MMC_REG_STAT	0x10
> -#define	OMAP_MMC_REG_IE		0x14
> -#define	OMAP_MMC_REG_CTO	0x18
> -#define	OMAP_MMC_REG_DTO	0x1c
> -#define	OMAP_MMC_REG_DATA	0x20
> -#define	OMAP_MMC_REG_BLEN	0x24
> -#define	OMAP_MMC_REG_NBLK	0x28
> -#define	OMAP_MMC_REG_BUF	0x2c
> -#define OMAP_MMC_REG_SDIO	0x34
> -#define	OMAP_MMC_REG_REV	0x3c
> -#define	OMAP_MMC_REG_RSP0	0x40
> -#define	OMAP_MMC_REG_RSP1	0x44
> -#define	OMAP_MMC_REG_RSP2	0x48
> -#define	OMAP_MMC_REG_RSP3	0x4c
> -#define	OMAP_MMC_REG_RSP4	0x50
> -#define	OMAP_MMC_REG_RSP5	0x54
> -#define	OMAP_MMC_REG_RSP6	0x58
> -#define	OMAP_MMC_REG_RSP7	0x5c
> -#define	OMAP_MMC_REG_IOSR	0x60
> -#define	OMAP_MMC_REG_SYSC	0x64
> -#define	OMAP_MMC_REG_SYSS	0x68
> +#define	OMAP_MMC_REG_ARGL	0x01
> +#define	OMAP_MMC_REG_ARGH	0x02
> +#define	OMAP_MMC_REG_CON	0x03
> +#define	OMAP_MMC_REG_STAT	0x04
> +#define	OMAP_MMC_REG_IE		0x05
> +#define	OMAP_MMC_REG_CTO	0x06
> +#define	OMAP_MMC_REG_DTO	0x07
> +#define	OMAP_MMC_REG_DATA	0x08
> +#define	OMAP_MMC_REG_BLEN	0x09
> +#define	OMAP_MMC_REG_NBLK	0x0a
> +#define	OMAP_MMC_REG_BUF	0x0b
> +#define	OMAP_MMC_REG_SDIO	0x0d
> +#define	OMAP_MMC_REG_REV	0x0f
> +#define	OMAP_MMC_REG_RSP0	0x10
> +#define	OMAP_MMC_REG_RSP1	0x11
> +#define	OMAP_MMC_REG_RSP2	0x12
> +#define	OMAP_MMC_REG_RSP3	0x13
> +#define	OMAP_MMC_REG_RSP4	0x14
> +#define	OMAP_MMC_REG_RSP5	0x15
> +#define	OMAP_MMC_REG_RSP6	0x16
> +#define	OMAP_MMC_REG_RSP7	0x17
> +#define	OMAP_MMC_REG_IOSR	0x18
> +#define	OMAP_MMC_REG_SYSC	0x19
> +#define	OMAP_MMC_REG_SYSS	0x1a
>  
>  #define	OMAP_MMC_STAT_CARD_ERR		(1 << 14)
>  #define	OMAP_MMC_STAT_CARD_IRQ		(1 << 13)
> @@ -77,8 +77,9 @@
>  #define	OMAP_MMC_STAT_CARD_BUSY		(1 <<  2)
>  #define	OMAP_MMC_STAT_END_OF_CMD	(1 <<  0)
>  
> -#define OMAP_MMC_READ(host, reg)	__raw_readw((host)->virt_base + OMAP_MMC_REG_##reg)
> -#define OMAP_MMC_WRITE(host, reg, val)	__raw_writew((val), (host)->virt_base + OMAP_MMC_REG_##reg)
> +#define OMAP_MMC_REG(host, reg)		(OMAP_MMC_REG_##reg << (host)->reg_shift)
> +#define OMAP_MMC_READ(host, reg)	__raw_readw((host)->virt_base + OMAP_MMC_REG(host, reg))
> +#define OMAP_MMC_WRITE(host, reg, val)	__raw_writew((val), (host)->virt_base + OMAP_MMC_REG(host, reg))
>  
>  /*
>   * Command types
> @@ -132,6 +133,7 @@ struct mmc_omap_host {
>  	int			irq;
>  	unsigned char		bus_mode;
>  	unsigned char		hw_bus_mode;
> +	unsigned int		reg_shift;
>  
>  	struct work_struct	cmd_abort_work;
>  	unsigned		abort:1;
> @@ -679,9 +681,9 @@ mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
>  	host->data->bytes_xfered += n;
>  
>  	if (write) {
> -		__raw_writesw(host->virt_base + OMAP_MMC_REG_DATA, host->buffer, n);
> +		__raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n);
>  	} else {
> -		__raw_readsw(host->virt_base + OMAP_MMC_REG_DATA, host->buffer, n);
> +		__raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n);
>  	}
>  }
>  
> @@ -899,7 +901,7 @@ mmc_omap_prepare_dma(struct mmc_omap_host *host, struct mmc_data *data)
>  	int dst_port = 0;
>  	int sync_dev = 0;
>  
> -	data_addr = host->phys_base + OMAP_MMC_REG_DATA;
> +	data_addr = host->phys_base + OMAP_MMC_REG(host, DATA);
>  	frame = data->blksz;
>  	count = sg_dma_len(sg);
>  
> @@ -1492,6 +1494,8 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> +	host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
> +
>  	return 0;
>  
>  err_plat_cleanup:
> -- 
> 1.6.3.3
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux