[PATCH v2 3/5] OMAP4-HSMMC: Adding MMC-TWL regulator changes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds PBIAS Configuration during POWER ON and OFF.
Also it adds MMC1 Card detect configuration on Phoenix

Signed-off-by: Kishore Kadiyala <kishore.kadiyala@xxxxxx>
---
 arch/arm/mach-omap2/hsmmc.c               |  121 ++++++++++++++++++++++++++---
 arch/arm/plat-omap/include/plat/control.h |   17 ++++
 include/linux/i2c/twl.h                   |   42 +++++++++-
 3 files changed, 166 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index f5ca16c..a73f011 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -14,6 +14,7 @@
 #include <linux/string.h>
 #include <linux/delay.h>
 #include <linux/i2c/twl.h>
+#include <linux/platform_device.h>
 #include <mach/hardware.h>
 #include <plat/control.h>
 #include <plat/mmc.h>
@@ -25,6 +26,7 @@

 static u16 control_pbias_offset;
 static u16 control_devconf1_offset;
+static u16 control_mmc1;

 #define HSMMC_NAME_LEN	9

@@ -43,7 +45,7 @@ static int hsmmc_get_context_loss(struct device *dev)
 #define hsmmc_get_context_loss NULL
 #endif

-static void hsmmc1_before_set_reg(struct device *dev, int slot,
+static void omap_hsmmc1_before_set_reg(struct device *dev, int slot,
 				  int power_on, int vdd)
 {
 	u32 reg, prog_io;
@@ -96,7 +98,7 @@ static void hsmmc1_before_set_reg(struct device *dev, int slot,
 	}
 }

-static void hsmmc1_after_set_reg(struct device *dev, int slot,
+static void omap_hsmmc1_after_set_reg(struct device *dev, int slot,
 				 int power_on, int vdd)
 {
 	u32 reg;
@@ -120,6 +122,61 @@ static void hsmmc1_after_set_reg(struct device *dev, int slot,
 	}
 }

+static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot,
+				  int power_on, int vdd)
+{
+	u32 reg;
+
+	/*
+	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
+	 * card with Vcc regulator (from twl4030 or whatever).  OMAP has both
+	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
+	 *
+	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
+	 * is most naturally TWL VSIM; those pins also use PBIAS.
+	 *
+	 * FIXME handle VMMC1A as needed ...
+	 */
+	if (power_on) {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ | OMAP4_MMC1_PWRDNZ);
+		omap_ctrl_writel(reg, control_pbias_offset);
+	} else {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ | OMAP4_MMC1_PWRDNZ);
+		omap_ctrl_writel(reg, control_pbias_offset);
+	}
+}
+
+static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
+				 int power_on, int vdd)
+{
+	u32 reg;
+
+	/* 100ms delay required for PBIAS configuration */
+	msleep(100);
+
+	if (power_on) {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg |= OMAP4_MMC1_PBIASLITE_PWRDNZ;
+		if ((1 << vdd) <= MMC_VDD_165_195) {
+			reg &= ~OMAP4_MMC1_PBIASLITE_VMODE;
+			reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ |
+						OMAP4_MMC1_PWRDNZ);
+		} else {
+			reg |= (OMAP4_MMC1_PBIASLITE_VMODE |
+				OMAP4_MMC1_PBIASLITE_PWRDNZ |
+					OMAP4_MMC1_PWRDNZ);
+		}
+		omap_ctrl_writel(reg, control_pbias_offset);
+	} else {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		 reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ |
+			OMAP4_MMC1_PBIASLITE_VMODE | OMAP4_MMC1_PWRDNZ);
+		omap_ctrl_writel(reg, control_pbias_offset);
+	}
+}
+
 static void hsmmc23_before_set_reg(struct device *dev, int slot,
 				   int power_on, int vdd)
 {
@@ -140,6 +197,24 @@ static void hsmmc23_before_set_reg(struct device *dev, int slot,
 	}
 }

+static int mmc_twl_late_init(struct device *dev)
+{
+	int ret = 0;
+	struct platform_device *pdev = container_of(dev,
+					struct platform_device, dev);
+
+	if (cpu_is_omap44xx()) {
+		/* MMC1 Card detect Configuration */
+		if (pdev->id == 0) {
+			ret = omap4_hsmmc1_card_detect_config();
+			if (ret < 0)
+				pr_err("Unable to configure"
+					"Card detect for MMC1\n");
+		}
+	}
+	return ret;
+}
+
 static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;

 void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
@@ -147,13 +222,28 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info
 	struct omap2_hsmmc_info *c;
 	int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
 	int i;
+	u32 reg;

-	if (cpu_is_omap2430()) {
-		control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
-		control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1;
+	if (!cpu_is_omap44xx()) {
+		if (cpu_is_omap2430()) {
+			control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
+			control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1;
+		} else {
+			control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
+			control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
+		}
 	} else {
-		control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
-		control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
+		control_pbias_offset = OMAP44XX_CONTROL_PBIAS_LITE;
+		control_mmc1 = OMAP44XX_CONTROL_MMC1;
+		reg = omap_ctrl_readl(control_mmc1);
+		reg |= (OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0 |
+			OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1);
+		reg &= ~(OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2 |
+			OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3);
+		reg |= (OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL |
+			OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL |
+			OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL);
+		omap_ctrl_writel(reg, control_mmc1);
 	}

 	for (c = controllers; c->mmc; c++) {
@@ -186,6 +276,7 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 		mmc->slots[0].wires = c->wires;
 		mmc->slots[0].internal_clock = !c->ext_clock;
 		mmc->dma_mask = 0xffffffff;
+		mmc->init = mmc_twl_late_init;

 		mmc->get_context_loss_count = hsmmc_get_context_loss;

@@ -220,10 +311,18 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info

 		switch (c->mmc) {
 		case 1:
-			/* on-chip level shifting via PBIAS0/PBIAS1 */
-			mmc->slots[0].before_set_reg = hsmmc1_before_set_reg;
-			mmc->slots[0].after_set_reg = hsmmc1_after_set_reg;
-
+			if (cpu_is_omap44xx()) {
+				/* on-chip level shifting via PBIAS0/PBIAS1 */
+				mmc->slots[0].before_set_reg =
+						omap4_hsmmc1_before_set_reg;
+				mmc->slots[0].after_set_reg =
+						omap4_hsmmc1_after_set_reg;
+			} else {
+				mmc->slots[0].before_set_reg =
+						omap_hsmmc1_before_set_reg;
+				mmc->slots[0].after_set_reg =
+						omap_hsmmc1_after_set_reg;
+			}
 			/* Omap3630 HSMMC1 supports only 4-bit */
 			if (cpu_is_omap3630() && c->wires > 4) {
 				c->wires = 4;
diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h
index a56deee..6d17a61 100644
--- a/arch/arm/plat-omap/include/plat/control.h
+++ b/arch/arm/plat-omap/include/plat/control.h
@@ -207,6 +207,9 @@
 /* 44xx control status register offset */
 #define OMAP44XX_CONTROL_STATUS		0x2c4

+/* 44xx-only CONTROL_GENERAL register offsets */
+#define OMAP44XX_CONTROL_MMC1           0x628
+#define OMAP44XX_CONTROL_PBIAS_LITE     0x600
 /*
  * REVISIT: This list of registers is not comprehensive - there are more
  * that should be added.
@@ -252,6 +255,20 @@
 #define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
 #define OMAP2_PBIASLITEVMODE0		(1 << 0)

+/* CONTROL_PBIAS_LITE bits for OMAP4 */
+#define OMAP4_MMC1_PWRDNZ			(1 << 26)
+#define OMAP4_MMC1_PBIASLITE_HIZ_MODE		(1 << 25)
+#define OMAP4_MMC1_PBIASLITE_PWRDNZ		(1 << 22)
+#define OMAP4_MMC1_PBIASLITE_VMODE		(1 << 21)
+
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0	(1 << 31)
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1	(1 << 30)
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2	(1 << 29)
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3	(1 << 28)
+#define OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL	(1 << 27)
+#define OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL	(1 << 26)
+#define OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL	(1 << 25)
+
 /* CONTROL_PROG_IO1 bits */
 #define OMAP3630_PRG_SDMMC1_SPEEDCTRL	(1 << 20)

diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index eb198db..423a355 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -142,6 +142,13 @@
 #define TWL6030_CHARGER_FAULT_INT_MASK 	0x60

 #define TWL6030_MMCCTRL			0xEE
+#define VMMC_AUTO_OFF			(0x1 << 3)
+#define SW_FC				(0x1 << 2)
+
+#define TWL6030_CFG_INPUT_PUPD3		0xF2
+#define MMC_PU				(0x1 << 3)
+#define MMC_PD				(0x1 << 2)
+

 #define TWL4030_CLASS_ID 		0x4030
 #define TWL6030_CLASS_ID 		0x6030
@@ -174,11 +181,40 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned
 int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
 int twl6030_interrupt_mask(u8 bit_mask, u8 offset);

-/*
- * MMC1 Controller on OMAP4 uses Phoenix Irq for Card detect.
- */
+/* MMC1 Controller on OMAP4 uses Phoenix Irq for Card detect */
 int twl6030_mmc_card_detect(struct device *dev, int slot);

+/* Configuring Card Detect for MMC1 */
+static inline int omap4_hsmmc1_card_detect_config(void)
+{
+	int res = -1;
+	u8 reg_val = 0;
+
+	/* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */
+	if (twl_class_is_6030()) {
+		twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
+							REG_INT_MSK_LINE_B);
+		twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
+							REG_INT_MSK_STS_B);
+	}
+
+	/*
+	 * Intially Configuring MMC_CTRL for receving interrupts &
+	 * Card status on TWL6030 for MMC1
+	 */
+	reg_val |= (SW_FC & ~VMMC_AUTO_OFF);
+	twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL);
+	res = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val,
+						TWL6030_CFG_INPUT_PUPD3);
+	if (res < 0)
+		return -EINVAL;
+	reg_val = 0;
+	reg_val &= ~(MMC_PU | MMC_PD);
+	twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
+						TWL6030_CFG_INPUT_PUPD3);
+	return 0;
+}
+
 /*----------------------------------------------------------------------*/

 /*
-- 
1.6.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux