On Tue, 27 Apr 2010 19:15:02 +0900
Yusuke Goda <yusuke.goda.sx@xxxxxxxxxxx> wrote:
>
> MMCIF is MMC Host Interface in SuperH.
>
> ...
>
> +static void sh_mmcif_clock_control(struct sh_mmcif_host *host, unsigned int clk)
> +{
> + int i;
> + struct sh_mmcif_plat_data *p = host->pd->dev.platform_data;
> +
> + sh_mmcif_bitclr(host, MMCIF_CE_CLK_CTRL, CLK_ENABLE);
> + sh_mmcif_bitclr(host, MMCIF_CE_CLK_CTRL, CLK_CLEAR);
> +
> + if (!clk)
> + return;
> + if (p->sup_pclk && clk == host->clk) {
> + sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, CLK_SUP_PCLK);
> + } else {
> + for (i = 1; (unsigned int)host->clk / (1 << i) >= clk; i++)
> + ;
I suspect this could be clarified. Perhaps
i = ilog2(__roundup_pow_of_two(host->clk));
If that's wrong then include/linux/log2.h has various tools which can
surely be used. If they're not appropriate then please feel free to
propose additions.
> + sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, (i - 1) << 16);
> + }
> + sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, CLK_ENABLE);
> +}
> +
>
> ...
>
> +static int sh_mmcif_error_manage(struct sh_mmcif_host *host)
> +{
> + u32 state1, state2;
> + int ret, timeout = 10000000;
> +
> + host->sd_error = 0;
> + host->wait_int = 0;
> +
> + state1 = sh_mmcif_readl(host, MMCIF_CE_HOST_STS1);
> + state2 = sh_mmcif_readl(host, MMCIF_CE_HOST_STS2);
> + pr_debug("%s: ERR HOST_STS1 = %08x\n", \
> + DRIVER_NAME, sh_mmcif_readl(host, MMCIF_CE_HOST_STS1));
> + pr_debug("%s: ERR HOST_STS2 = %08x\n", \
> + DRIVER_NAME, sh_mmcif_readl(host, MMCIF_CE_HOST_STS2));
> +
> + if (state1 & STS1_CMDSEQ) {
> + pr_debug("%s: Forced end of command sequence\n", DRIVER_NAME);
> + sh_mmcif_bitset(host, MMCIF_CE_CMD_CTRL, CMD_CTRL_BREAK);
> + sh_mmcif_bitset(host, MMCIF_CE_CMD_CTRL, ~CMD_CTRL_BREAK);
> + while (1) {
> + timeout--;
> + if (timeout < 0) {
> + pr_err(DRIVER_NAME": Forceed end of " \
> + "command sequence timeout err\n");
> + return -EILSEQ;
> + }
> + if (!(sh_mmcif_readl(host, MMCIF_CE_HOST_STS1)
> + & STS1_CMDSEQ))
> + break;
> + mdelay(1);
> + }
> + sh_mmcif_sync_reset(host);
> + return -EILSEQ;
Good heavens, what is EILSEQ?
<googles a bit>
"An illegal multibyte sequence was found in the input. This
usually means that you have the wrong charactor encoding, for
instance the MicrosoftCorporation version of latin-1 (aka
iso_8859_1(7)) (which has it's own stuff like "smart quotes" in
the reserved bytes) instead of the real latin (or perhaps
utf8(7))."
Why on earth are driver writers using this in the kernel??? Imagine
the confusion which ensues when this error code propagates all the way
back to some poor user's console. They'll be scrabbling around with
language encodings not even suspecting that their hardware is busted.
People do this *a lot*. They go grubbing through errno.h and grab
something which looks vaguely appropriate. But it's wrong.
If your hardware is busted then return -EIO and emit a printk to tell
the operator what broke.
> + }
> +
> + if (state2 & STS2_CRC_ERR)
> + ret = -EILSEQ;
> + else if (state2 & STS2_TIMEOUT_ERR)
> + ret = -ETIMEDOUT;
> + else
> + ret = -EILSEQ;
> + return ret;
> +}
>
> ...
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
