* Madhusudhan <madhu.cr@xxxxxx> [100401 15:54]: <snip> > > Ref [1] I believe tony has the brand new zoom board - I think your > > assumption here might be flawed.. > > > > Wait, I just looked up the serial number on the board. The one I was using > is a pilot version where this problem exists. > > I happen to get an other board which is production unit with ser # 1013089 > Rev B. The eMMC on this board has no issue. It reports the EXT_CSD Rev 2 > which is correct and works fine. > > http://omappedia.org/wiki/Zoom_Resources > > There is a table here which could help. > > Tony, do you care to just look up the serial number of your board? Sorry for the delay in replying, I've been travelling for a few weeks and been in meetings quite a bit. Anyways, it's a 1013037 REV A board, which seems to be production in the table above. > But again there are several boards out there which could have this > non-working eMMC. So what do we do?? It does not make sense to keep > something enabled which does not work. There's arm kernel parameter for ATAG_REVISION that can be passed from bootloader and then the board-*.c code can initialize things accordingly based on the board revision. Regards, Tony > > [1] http://marc.info/?l=linux-omap&m=126938456103707&w=2 > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
