The patch titled
mmc: at91_mci: introduce per-mci-revision conditional code
has been removed from the -mm tree. Its filename was
mmc-at91_mci-introduce-per-mci-revision-conditional-code.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: mmc: at91_mci: introduce per-mci-revision conditional code
From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
We used to manage features and differences on a per-cpu basis. As several
cpus share the same mci revision, this patch aggregates cpus that have the
same IP revision in one defined constant. We use the
at91mci_is_mci1rev2xx() funtion name not to mess with newer Atmel sd/mmc
IP called "MCI2". _rev2 naming could have been confusing...
Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
Cc: Wolfgang Muees <wolfgang.mues@xxxxxxxxxxxx>
Cc: Andrew Victor <avictor.za@xxxxxxxxx>
Cc: <linux-mmc@xxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/at91_mci.c | 27 +++++++++++++++++++--------
1 file changed, 19 insertions(+), 8 deletions(-)
diff -puN drivers/mmc/host/at91_mci.c~mmc-at91_mci-introduce-per-mci-revision-conditional-code drivers/mmc/host/at91_mci.c
--- a/drivers/mmc/host/at91_mci.c~mmc-at91_mci-introduce-per-mci-revision-conditional-code
+++ a/drivers/mmc/host/at91_mci.c
@@ -78,6 +78,17 @@
#define DRIVER_NAME "at91_mci"
+static inline int at91mci_is_mci1rev2xx(void)
+{
+ return ( cpu_is_at91sam9260()
+ || cpu_is_at91sam9263()
+ || cpu_is_at91cap9()
+ || cpu_is_at91sam9rl()
+ || cpu_is_at91sam9g10()
+ || cpu_is_at91sam9g20()
+ );
+}
+
#define FL_SENT_COMMAND (1 << 0)
#define FL_SENT_STOP (1 << 1)
@@ -204,8 +215,8 @@ static inline void at91_mci_sg_to_dma(st
size = data->blksz * data->blocks;
len = data->sg_len;
- /* AT91SAM926[0/3] Data Write Operation and number of bytes erratum */
- if (cpu_is_at91sam9260() || cpu_is_at91sam9263())
+ /* MCI1 rev2xx Data Write Operation and number of bytes erratum */
+ if (at91mci_is_mci1rev2xx())
if (host->total_length == 12)
memset(dmabuf, 0, 12);
@@ -398,7 +409,7 @@ static void at91_mci_enable(struct at91m
at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC);
mr = AT91_MCI_PDCMODE | 0x34a;
- if (cpu_is_at91sam9260() || cpu_is_at91sam9263())
+ if (at91mci_is_mci1rev2xx())
mr |= AT91_MCI_RDPROOF | AT91_MCI_WRPROOF;
at91_mci_write(host, AT91_MCI_MR, mr);
@@ -555,10 +566,10 @@ static void at91_mci_send_command(struct
*/
host->total_length = block_length * blocks;
/*
- * AT91SAM926[0/3] Data Write Operation and
+ * MCI1 rev2xx Data Write Operation and
* number of bytes erratum
*/
- if (cpu_is_at91sam9260 () || cpu_is_at91sam9263())
+ if (at91mci_is_mci1rev2xx())
if (host->total_length < 12)
host->total_length = 12;
@@ -943,7 +954,7 @@ static int __init at91_mci_probe(struct
host->bus_mode = 0;
host->board = pdev->dev.platform_data;
if (host->board->wire4) {
- if (cpu_is_at91sam9260() || cpu_is_at91sam9263())
+ if (at91mci_is_mci1rev2xx())
mmc->caps |= MMC_CAP_4_BIT_DATA;
else
dev_warn(&pdev->dev, "4 wire bus mode not supported"
@@ -959,8 +970,8 @@ static int __init at91_mci_probe(struct
}
/* Add SDIO capability when available */
- if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
- /* AT91SAM9260/9263 erratum */
+ if (at91mci_is_mci1rev2xx()) {
+ /* at91mci MCI1 rev2xx sdio interrupt erratum */
if (host->board->wire4 || !host->board->slot_b)
mmc->caps |= MMC_CAP_SDIO_IRQ;
}
_
Patches currently in -mm which might be from nicolas.ferre@xxxxxxxxx are
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
