Re: [PATCH 3/3] mmc: omap_hsmmc: enable SDIO card interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 18 Feb 2010, Steve Sakoman wrote:

> On Thu, Feb 18, 2010 at 12:21 PM, Paul Walmsley <paul@xxxxxxxxx> wrote:
> 
> > (cc'ing Steve, Richard, Anand)
> 
> > There appear to be least seven SDIO card drivers in 2.6.34-rc7. At least
> > one of these is for a TI chip - the wl1251.  I think some of the
> > Gumstix Overo OMAP3 boards are using an SDIO-connected Marvell Libertas:
> >
> > http://www.gumstix.com/store/catalog/product_info.php?products_id=252
> 
> That is correct, a Wi2Wi wifi module is connected via mmc2 on the
> Overo Air and Fire products.
> 
> Data rates are pretty low with the existing OMAP SDIO driver.   Any
> chance this patch would improve that situation?

Without proper SDIO interrupt support at the controller level, the core 
SDIO code does poll for pending SDIO interrupts periodically.  So yes, 
this patch is certainly going to help throughput.


Nicolas

[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux