Re: [PATCH 5/8] omap_hsmmc: RX51: set padconfs to pull down when powering off eMMC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Tony Lindgren <tony@xxxxxxxxxxx> [100113 12:38]:
> * Tony Lindgren <tony@xxxxxxxxxxx> [100113 12:36]:
> > 
> > You might want to check what happens in omap off-idle mode in these cases
> > and see if enabling OMAP_PIN_OFF_INPUT_PULLDOWN makes any difference in
> > power consumption in off state. That probably does not matter unless the
> > floating lines cause the eMMC to do something on it's own :)
> 
> Or OMAP_PIN_OFF_OUTPUT_LOW actually.

One more time.. Most likely OMAP_PIN_OFF_INPUT_PULLDOWN is safer
in general as the OMAP_PIN_OFF_OUTPUT_LOW does not work for all
pins. According to the TRM, OMAP_PIN_OFF_OUTPUT_LOW only works
for pins where at least one of the mux modes supports output
mode.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux