The patch titled blackfin-sd-host-controller-driver-fix has been removed from the -mm tree. Its filename was blackfin-sd-host-controller-driver-fix.patch This patch was dropped because it was folded into blackfin-sd-host-controller-driver.patch The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: blackfin-sd-host-controller-driver-fix From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> fix layout, c99 warning Cc: <linux-mmc@xxxxxxxxxxxxxxx> Cc: Bryan Wu <cooloney@xxxxxxxxxx> Cc: Cliff Cai <cliffcai.sh@xxxxxxxxx> Cc: Mike Frysinger <vapier@xxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/mmc/host/Kconfig | 26 +++++++++++++------------- drivers/mmc/host/bfin_sdh.c | 28 ++++++++++++++++------------ 2 files changed, 29 insertions(+), 25 deletions(-) diff -puN drivers/mmc/host/Kconfig~blackfin-sd-host-controller-driver-fix drivers/mmc/host/Kconfig --- a/drivers/mmc/host/Kconfig~blackfin-sd-host-controller-driver-fix +++ a/drivers/mmc/host/Kconfig @@ -367,20 +367,20 @@ config MMC_VIA_SDMMC If unsure, say N. config SDH_BFIN - tristate "Blackfin Secure Digital Host support" - depends on MMC && ((BF54x && !BF544) || (BF51x && !BF512)) - help - If you say yes here you will get support for the Blackfin on-chip - Secure Digital Host interface. This includes support for MMC and - SD cards. + tristate "Blackfin Secure Digital Host support" + depends on MMC && ((BF54x && !BF544) || (BF51x && !BF512)) + help + If you say yes here you will get support for the Blackfin on-chip + Secure Digital Host interface. This includes support for MMC and + SD cards. - To compile this driver as a module, choose M here: the - module will be called bfin_sdh. + To compile this driver as a module, choose M here: the + module will be called bfin_sdh. - If unsure, say N. + If unsure, say N. config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND - bool "Blackfin EZkit Missing SDH_CMD Pull Up Resistor Workaround" - depends on SDH_BFIN - help - If you say yes here SD-Cards may work on the EZkit. + bool "Blackfin EZkit Missing SDH_CMD Pull Up Resistor Workaround" + depends on SDH_BFIN + help + If you say yes here SD-Cards may work on the EZkit. diff -puN drivers/mmc/host/bfin_sdh.c~blackfin-sd-host-controller-driver-fix drivers/mmc/host/bfin_sdh.c --- a/drivers/mmc/host/bfin_sdh.c~blackfin-sd-host-controller-driver-fix +++ a/drivers/mmc/host/bfin_sdh.c @@ -53,7 +53,7 @@ struct dma_desc_array { unsigned short cfg; unsigned short x_count; short x_modify; -} __attribute__((packed)); +} __packed; struct sdh_host { struct mmc_host *mmc; @@ -149,15 +149,17 @@ static int sdh_setup_data(struct sdh_hos sdh_enable_stat_irq(host, (DAT_CRC_FAIL | DAT_TIME_OUT | DAT_END)); host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma_dir); #if defined(CONFIG_BF54x) - int i; dma_cfg |= DMAFLOW_ARRAY | NDSIZE_5 | RESTART | WDSIZE_32 | DMAEN; - for_each_sg(data->sg, sg, host->dma_len, i) { - host->sg_cpu[i].start_addr = sg_dma_address(sg); - host->sg_cpu[i].cfg = dma_cfg; - host->sg_cpu[i].x_count = sg_dma_len(sg) / 4; - host->sg_cpu[i].x_modify = 4; - dev_dbg(mmc_dev(host->mmc), "%d: start_addr:0x%lx, cfg:0x%x, x_count:0x%x,\ - x_modify:0x%x\n", i, host->sg_cpu[i].start_addr, + { + int i; + for_each_sg(data->sg, sg, host->dma_len, i) { + host->sg_cpu[i].start_addr = sg_dma_address(sg); + host->sg_cpu[i].cfg = dma_cfg; + host->sg_cpu[i].x_count = sg_dma_len(sg) / 4; + host->sg_cpu[i].x_modify = 4; + dev_dbg(mmc_dev(host->mmc), "%d: start_addr:0x%lx, " + "cfg:0x%x, x_count:0x%x, x_modify:0x%x\n", + i, host->sg_cpu[i].start_addr, host->sg_cpu[i].cfg, host->sg_cpu[i].x_count, host->sg_cpu[i].x_modify); } @@ -205,8 +207,9 @@ static void sdh_start_cmd(struct sdh_hos if (cmd->flags & MMC_RSP_PRESENT) { sdh_cmd |= CMD_RSP; stat_mask |= CMD_RESP_END; - } else + } else { stat_mask |= CMD_SENT; + } if (cmd->flags & MMC_RSP_136) sdh_cmd |= CMD_L_RSP; @@ -304,8 +307,9 @@ static int sdh_data_done(struct sdh_host if (host->mrq->stop) { sdh_stop_clock(host); sdh_start_cmd(host, host->mrq->stop); - } else + } else } sdh_finish_request(host, host->mrq); + } return 1; } @@ -425,7 +429,7 @@ static irqreturn_t sdh_stat_irq(int irq, status = bfin_read_SDH_STATUS(); if (status & (CMD_SENT | CMD_RESP_END | CMD_TIME_OUT | CMD_CRC_FAIL)) { handled |= sdh_cmd_done(host, status); - bfin_write_SDH_STATUS_CLR( CMD_SENT_STAT | CMD_RESP_END_STAT | \ + bfin_write_SDH_STATUS_CLR(CMD_SENT_STAT | CMD_RESP_END_STAT | \ CMD_TIMEOUT_STAT | CMD_CRC_FAIL_STAT); SSYNC(); } _ Patches currently in -mm which might be from akpm@xxxxxxxxxxxxxxxxxxxx are origin.patch mmap-dont-return-enomem-when-mapcount-is-temporarily-exceeded-in-munmap.patch dev-mem-cleanup-unxlate_dev_mem_ptr-calls.patch oom-kill-fix-numa-consraint-check-with-nodemask-v42.patch mm-mlocking-in-try_to_unmap_one.patch mm-memory_hotplug-make-offline_pages-static.patch mm-hugetlb-fix-hugepage-memory-leak-in-mincore.patch mm-hugetlb-add-hugepage-support-to-pagemap.patch procfs-allow-threads-to-rename-siblings-via-proc-pid-tasks-tid-comm.patch floppy-add-an-extra-bound-check-on-ioctl-arguments.patch rwsem-fix-rwsem_is_locked-bugs.patch kernelh-add-printk_ratelimited-and-pr_level_rl.patch errh-add-helper-function-to-simplify-pointer-error-checking.patch cs5535-add-a-generic-mfgpt-driver.patch cs5535-add-a-generic-clock-event-mfgpt-driver.patch drivers-scsi-sym53c8xx_2-sym_gluec-rename-skip_spaces-to-sym_skip_spaces.patch lib-introduce-strim.patch blackfin-sd-host-controller-driver.patch blackfin-sd-host-controller-driver-fix.patch blackfin-sd-host-controller-driver-fix-fix.patch blackfin-sd-host-controller-driver-fix-fix-fix.patch crc32-minor-optimizations-and-cleanup-checkpatch-fixes.patch hwmon-w83627ehf-updates-checkpatch-fixes.patch lis3-update-documentation-to-match-latest-changes-fix.patch -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html