On SuperH platforms the SDHI controller does not produce any command IRQs after a completed IO. This leads to card-detect interrupts staying disabled. Do not disable card-detect interrupts on DATA IRQs. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@xxxxxx> --- Marked as RFC because I'm not really sure this is a correct approach to fix this problem, and whether this will have negative effect on other tmio_mmc MFD users. diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index c676767..0b31d44 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -55,10 +55,8 @@ /* Define some IRQ masks */ /* This is the mask used at reset by the chip */ #define TMIO_MASK_ALL 0x837f031d -#define TMIO_MASK_READOP (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND | \ - TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) -#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND | \ - TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) +#define TMIO_MASK_READOP (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND) +#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND) #define TMIO_MASK_CMD (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \ TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) #define TMIO_MASK_IRQ (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD) -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html