From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
According to the standard, the SWITCH command should be followed by a
SEND_STATUS command to check for errors.
Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Acked-by: Matt Fleming <matt@xxxxxxxxxxxxxxxxx>
Cc: Ian Molton <ian@xxxxxxxxxxxxxx>
Cc: "Roberto A. Foglietta" <roberto.foglietta@xxxxxxxxx>
Cc: Jarkko Lavinen <jarkko.lavinen@xxxxxxxxx>
Cc: Denis Karpov <ext-denis.2.karpov@xxxxxxxxx>
Cc: Pierre Ossman <pierre@xxxxxxxxx>
Cc: Philip Langdale <philipl@xxxxxxxxx>
Cc: "Madhusudhan" <madhu.cr@xxxxxx>
Cc: <linux-mmc@xxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/core/mmc.c | 24 ++++++++++++++++++------
drivers/mmc/core/mmc_ops.c | 23 +++++++++++++++++++++++
include/linux/mmc/mmc.h | 1 +
3 files changed, 42 insertions(+), 6 deletions(-)
diff -puN drivers/mmc/core/mmc.c~mmc-check-status-after-mmc-switch-command drivers/mmc/core/mmc.c
--- a/drivers/mmc/core/mmc.c~mmc-check-status-after-mmc-switch-command
+++ a/drivers/mmc/core/mmc.c
@@ -416,12 +416,17 @@ static int mmc_init_card(struct mmc_host
(host->caps & MMC_CAP_MMC_HIGHSPEED)) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HS_TIMING, 1);
- if (err)
+ if (err && err != -EBADMSG)
goto free_card;
- mmc_card_set_highspeed(card);
-
- mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
+ if (err) {
+ printk(KERN_WARNING "%s: switch to highspeed failed\n",
+ mmc_hostname(card->host));
+ err = 0;
+ } else {
+ mmc_card_set_highspeed(card);
+ mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
+ }
}
/*
@@ -456,10 +461,17 @@ static int mmc_init_card(struct mmc_host
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH, ext_csd_bit);
- if (err)
+ if (err && err != -EBADMSG)
goto free_card;
- mmc_set_bus_width(card->host, bus_width);
+ if (err) {
+ printk(KERN_WARNING "%s: switch to bus width %d "
+ "failed\n", mmc_hostname(card->host),
+ 1 << bus_width);
+ err = 0;
+ } else {
+ mmc_set_bus_width(card->host, bus_width);
+ }
}
if (!oldcard)
diff -puN drivers/mmc/core/mmc_ops.c~mmc-check-status-after-mmc-switch-command drivers/mmc/core/mmc_ops.c
--- a/drivers/mmc/core/mmc_ops.c~mmc-check-status-after-mmc-switch-command
+++ a/drivers/mmc/core/mmc_ops.c
@@ -390,6 +390,7 @@ int mmc_switch(struct mmc_card *card, u8
{
int err;
struct mmc_command cmd;
+ u32 status;
BUG_ON(!card);
BUG_ON(!card->host);
@@ -407,6 +408,28 @@ int mmc_switch(struct mmc_card *card, u8
if (err)
return err;
+ /* Must check status to be sure of no errors */
+ do {
+ err = mmc_send_status(card, &status);
+ if (err)
+ return err;
+ if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
+ break;
+ if (mmc_host_is_spi(card->host))
+ break;
+ } while (R1_CURRENT_STATE(status) == 7);
+
+ if (mmc_host_is_spi(card->host)) {
+ if (status & R1_SPI_ILLEGAL_COMMAND)
+ return -EBADMSG;
+ } else {
+ if (status & 0xFDFFA000)
+ printk(KERN_WARNING "%s: unexpected status %#x after "
+ "switch", mmc_hostname(card->host), status);
+ if (status & R1_SWITCH_ERROR)
+ return -EBADMSG;
+ }
+
return 0;
}
diff -puN include/linux/mmc/mmc.h~mmc-check-status-after-mmc-switch-command include/linux/mmc/mmc.h
--- a/include/linux/mmc/mmc.h~mmc-check-status-after-mmc-switch-command
+++ a/include/linux/mmc/mmc.h
@@ -128,6 +128,7 @@
#define R1_STATUS(x) (x & 0xFFFFE000)
#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */
#define R1_READY_FOR_DATA (1 << 8) /* sx, a */
+#define R1_SWITCH_ERROR (1 << 7) /* sx, c */
#define R1_APP_CMD (1 << 5) /* sr, c */
/*
_
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
