The clear_imask() call should be used to clear the interrupt mask register, as it may end up clearing the SDIO interrupt bit if this is enabled. Change all writes of zero to SDIIMSK register to use clear_imask() ready for the SDIO updates. Signed-off-by: Ben Dooks <ben@xxxxxxxxxxxx> --- Index: b/drivers/mmc/host/s3cmci.c =================================================================== --- a/drivers/mmc/host/s3cmci.c 2009-07-22 14:55:13.000000000 +0100 +++ b/drivers/mmc/host/s3cmci.c 2009-07-22 14:57:07.000000000 +0100 @@ -681,9 +681,9 @@ out: fail_request: host->mrq->data->error = -EINVAL; host->complete_what = COMPLETION_FINALIZE; - writel(0, host->base + host->sdiimsk); - goto out; + clear_imask(host); + goto out; } static void finalize_request(struct s3cmci_host *host) @@ -726,7 +726,7 @@ static void finalize_request(struct s3cm writel(0, host->base + S3C2410_SDICMDARG); writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON); writel(0, host->base + S3C2410_SDICMDCON); - writel(0, host->base + host->sdiimsk); + clear_imask(host); if (cmd->data && cmd->error) cmd->data->error = cmd->error; -- -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
