Hi When I've resumed my T61 with SD inserted in the internal card reader - I've got irq nobody cared warning; SD card has been inserted during suspend state (i.e. not present before suspend) Suspend without docking station Resume was connected to docking station. My machine is T61, 4GB, C2D, Kernel commit 7c0a57d5c47bcfc492b3139e77400f888a935c44 (some past 2.6.31-rc7) /proc/interrrupts: 18: 384 395 IO-APIC-fasteoi uhci_hcd:usb7, mmc0 Zdenek Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. pci 0000:00:02.0: power state changed by ACPI to D3 sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk sdhci-pci 0000:15:00.2: PME# disabled sdhci-pci 0000:15:00.2: PCI INT C disabled ata_piix 0000:00:1f.1: PCI INT C disabled ehci_hcd 0000:00:1d.7: PCI INT D disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled HDA Intel 0000:00:1b.0: PCI INT B disabled ehci_hcd 0000:00:1a.7: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled e1000e 0000:00:19.0: PCI INT A disabled e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 uhci_hcd 0000:00:1d.2: power state changed by ACPI to D3 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 uhci_hcd 0000:00:1a.1: power state changed by ACPI to D3 ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... kvm: disabling virtualization on CPU1 CPU 1 is now offline lockdep: fixing up alternatives. SMP alternatives: switching to UP code CPU1 is down Extended CMOS year: 2000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Extended CMOS year: 2000 Enabling non-boot CPUs ... lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4390.66 BogoMIPS (lpj=7314666) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a kvm: enabling virtualization on CPU1 CPU1 is up ACPI: Waking up from system sleep state S3 ACPI: \_SB_.GDCK - docking acpi device:2b: parent device:11 should not be sleeping acpi device:2c: parent device:22 should not be sleeping acpi device:2d: parent device:28 should not be sleeping acpi IBM0079:01: parent device:00 should not be sleeping uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: PME# disabled uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: PME# disabled e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 usb usb4: root hub lost power or was reset ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 irq 18: nobody cared (try booting with the "irqpoll" option) Pid: 0, comm: swapper Not tainted 2.6.31-rc7-00059-ge716334 #19 Call Trace: <IRQ> [<ffffffff810a500b>] __report_bad_irq+0x2b/0xa0 [<ffffffff810a520a>] note_interrupt+0x18a/0x1d0 [<ffffffff810a588d>] handle_fasteoi_irq+0xcd/0xf0 [<ffffffff8100ee99>] handle_irq+0x49/0xa0 [<ffffffff813e1343>] do_IRQ+0x73/0xf0 [<ffffffff8100cb93>] ret_from_intr+0x0/0xf <EOI> [<ffffffff8129057d>] ? acpi_idle_enter_c1+0xa1/0xc0 [<ffffffff8107d83d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81290580>] ? acpi_idle_enter_c1+0xa4/0xc0 [<ffffffff8129057d>] ? acpi_idle_enter_c1+0xa1/0xc0 [<ffffffff81334a9b>] ? cpuidle_idle_call+0x9b/0xf0 [<ffffffff8100aa7b>] ? cpu_idle+0x6b/0xd0 [<ffffffff813c72ca>] ? rest_init+0x7a/0x80 [<ffffffff81601b02>] ? start_kernel+0x38f/0x39b [<ffffffff81601128>] ? x86_64_start_reservations+0x125/0x129 [<ffffffff8160120d>] ? x86_64_start_kernel+0xe1/0xe8 handlers: [<ffffffffa0006720>] (usb_hcd_irq+0x0/0xa0 [usbcore]) Disabling IRQ #18 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 usb usb5: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 usb usb6: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 usb usb7: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. pci 0000:15:00.3: PME# disabled pci 0000:15:00.4: PME# disabled pci 0000:15:00.5: PME# disabled sd 0:0:0:0: [sda] Starting disk ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata4.00: configured for UDMA/33 ata3: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1.00: configured for UDMA/100 ata1: EH complete mmc0: new high speed SDHC card at address b368 mmc mmc0:b368: parent mmc0 should not be sleeping usb 3-2: reset full speed USB device using uhci_hcd and address 3 thinkpad_acpi: ACPI backlight control delay disabled Restarting tasks ... done. usb 1-4: new high speed USB device using ehci_hcd and address 8 usb 1-4: New USB device found, idVendor=04b3, idProduct=4485 usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-4: configuration #1 chosen from 1 choice hub 1-4:1.0: USB hub found hub 1-4:1.0: 4 ports detected mmcblk0: mmc0:b368 NCard 7.46 GiB mmcblk0: p1 usb 1-4.4: new low speed USB device using ehci_hcd and address 9 usb 1-4.4: New USB device found, idVendor=046d, idProduct=c016 usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-4.4: Product: Optical USB Mouse usb 1-4.4: Manufacturer: Logitech usb 1-4.4: configuration #1 chosen from 1 choice input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.4/1-4.4:1.0/input/input10 generic-usb 0003:046D:C016.0002: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.7-4.4/input0 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
