> ----- begin comment -----
>
> The offset to the fixup is signed, and we're trying to use the high
> bits for a different purpose. In C, we could just do:
>
> u32 class_and_offset = ((target - here) & 0x3fffffff) | class;
>
> Then, to decode it, we'd mask off the class and sign-extend to recover
> the offset.
>
> In asm, we can't do that, because this all gets laundered through the
> linker, and there's no relocation type that supports this chicanery.
> Instead we cheat a bit. We first add a large number to the offset
> (0x20000000). The result is still nominally signed, but now it's
> always positive, and the two high bits are always clear. We can then
> set high bits by ordinary addition or subtraction instead of using
> bitwise operations. As far as the linker is concerned, all we're
> doing is adding a large constant to the difference between here (".")
> and the target, and that's a valid relocation type.
>
> In the C code, we just mask off the class bits and subtract 0x20000000
> to get the offset.
>
> ----- end comment -----
But presumably those constants get folded together, so the linker
is dealing with only one offset. It doesn't (I assume) know that our
source code added 0x20000000 and then added/subtracted some
more.
It looks like we could just use:
class0: +0x40000000
class1: +0x80000000 (or subtract ... whatever doesn't make the linker cranky)
class2: -0x40000000
class3: don't add/subtract anything
ex_class() stays the same (just looks at bit31/bit30)
ex_fixup_addr() has to use ex_class() to decide what to add/subtract
(if anything).
Would that work? Would it be more or less confusing?
-Tony
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>