On Wed, Nov 04, 2015 at 12:00:06PM -0800, Shaohua Li wrote: > On Wed, Nov 04, 2015 at 10:25:55AM +0900, Minchan Kim wrote: > > Linux doesn't have an ability to free pages lazy while other OS already > > have been supported that named by madvise(MADV_FREE). > > > > The gain is clear that kernel can discard freed pages rather than swapping > > out or OOM if memory pressure happens. > > > > Without memory pressure, freed pages would be reused by userspace without > > another additional overhead(ex, page fault + allocation + zeroing). > > > > Jason Evans said: > > > > : Facebook has been using MAP_UNINITIALIZED > > : (https://lkml.org/lkml/2012/1/18/308) in some of its applications for > > : several years, but there are operational costs to maintaining this > > : out-of-tree in our kernel and in jemalloc, and we are anxious to retire it > > : in favor of MADV_FREE. When we first enabled MAP_UNINITIALIZED it > > : increased throughput for much of our workload by ~5%, and although the > > : benefit has decreased using newer hardware and kernels, there is still > > : enough benefit that we cannot reasonably retire it without a replacement. > > : > > : Aside from Facebook operations, there are numerous broadly used > > : applications that would benefit from MADV_FREE. The ones that immediately > > : come to mind are redis, varnish, and MariaDB. I don't have much insight > > : into Android internals and development process, but I would hope to see > > : MADV_FREE support eventually end up there as well to benefit applications > > : linked with the integrated jemalloc. > > : > > : jemalloc will use MADV_FREE once it becomes available in the Linux kernel. > > : In fact, jemalloc already uses MADV_FREE or equivalent everywhere it's > > : available: *BSD, OS X, Windows, and Solaris -- every platform except Linux > > : (and AIX, but I'm not sure it even compiles on AIX). The lack of > > : MADV_FREE on Linux forced me down a long series of increasingly > > : sophisticated heuristics for madvise() volume reduction, and even so this > > : remains a common performance issue for people using jemalloc on Linux. > > : Please integrate MADV_FREE; many people will benefit substantially. > > > > How it works: > > > > When madvise syscall is called, VM clears dirty bit of ptes of the range. > > If memory pressure happens, VM checks dirty bit of page table and if it > > found still "clean", it means it's a "lazyfree pages" so VM could discard > > the page instead of swapping out. Once there was store operation for the > > page before VM peek a page to reclaim, dirty bit is set so VM can swap out > > the page instead of discarding. > > > > Firstly, heavy users would be general allocators(ex, jemalloc, tcmalloc > > and hope glibc supports it) and jemalloc/tcmalloc already have supported > > the feature for other OS(ex, FreeBSD) > > > > barrios@blaptop:~/benchmark/ebizzy$ lscpu > > Architecture: x86_64 > > CPU op-mode(s): 32-bit, 64-bit > > Byte Order: Little Endian > > CPU(s): 12 > > On-line CPU(s) list: 0-11 > > Thread(s) per core: 1 > > Core(s) per socket: 1 > > Socket(s): 12 > > NUMA node(s): 1 > > Vendor ID: GenuineIntel > > CPU family: 6 > > Model: 2 > > Stepping: 3 > > CPU MHz: 3200.185 > > BogoMIPS: 6400.53 > > Virtualization: VT-x > > Hypervisor vendor: KVM > > Virtualization type: full > > L1d cache: 32K > > L1i cache: 32K > > L2 cache: 4096K > > NUMA node0 CPU(s): 0-11 > > ebizzy benchmark(./ebizzy -S 10 -n 512) > > > > Higher avg is better. > > > > vanilla-jemalloc MADV_free-jemalloc > > > > 1 thread > > records: 10 records: 10 > > avg: 2961.90 avg: 12069.70 > > std: 71.96(2.43%) std: 186.68(1.55%) > > max: 3070.00 max: 12385.00 > > min: 2796.00 min: 11746.00 > > > > 2 thread > > records: 10 records: 10 > > avg: 5020.00 avg: 17827.00 > > std: 264.87(5.28%) std: 358.52(2.01%) > > max: 5244.00 max: 18760.00 > > min: 4251.00 min: 17382.00 > > > > 4 thread > > records: 10 records: 10 > > avg: 8988.80 avg: 27930.80 > > std: 1175.33(13.08%) std: 3317.33(11.88%) > > max: 9508.00 max: 30879.00 > > min: 5477.00 min: 21024.00 > > > > 8 thread > > records: 10 records: 10 > > avg: 13036.50 avg: 33739.40 > > std: 170.67(1.31%) std: 5146.22(15.25%) > > max: 13371.00 max: 40572.00 > > min: 12785.00 min: 24088.00 > > > > 16 thread > > records: 10 records: 10 > > avg: 11092.40 avg: 31424.20 > > std: 710.60(6.41%) std: 3763.89(11.98%) > > max: 12446.00 max: 36635.00 > > min: 9949.00 min: 25669.00 > > > > 32 thread > > records: 10 records: 10 > > avg: 11067.00 avg: 34495.80 > > std: 971.06(8.77%) std: 2721.36(7.89%) > > max: 12010.00 max: 38598.00 > > min: 9002.00 min: 30636.00 > > > > In summary, MADV_FREE is about much faster than MADV_DONTNEED. > > The MADV_FREE is discussed for a while, it probably is too late to propose > something new, but we had the new idea (from Ben Maurer, CCed) recently and > think it's better. Our target is still jemalloc. > > Compared to MADV_DONTNEED, MADV_FREE's lazy memory free is a huge win to reduce > page fault. But there is one issue remaining, the TLB flush. Both MADV_DONTNEED > and MADV_FREE do TLB flush. TLB flush overhead is quite big in contemporary > multi-thread applications. In our production workload, we observed 80% CPU > spending on TLB flush triggered by jemalloc madvise(MADV_DONTNEED) sometimes. > We haven't tested MADV_FREE yet, but the result should be similar. It's hard to > avoid the TLB flush issue with MADV_FREE, because it helps avoid data > corruption. > > The new proposal tries to fix the TLB issue. We introduce two madvise verbs: > > MARK_FREE. Userspace notifies kernel the memory range can be discarded. Kernel > just records the range in current stage. Should memory pressure happen, page > reclaim can free the memory directly regardless the pte state. > > MARK_NOFREE. Userspace notifies kernel the memory range will be reused soon. > Kernel deletes the record and prevents page reclaim discards the memory. If the > memory isn't reclaimed, userspace will access the old memory, otherwise do > normal page fault handling. > > The point is to let userspace notify kernel if memory can be discarded, instead > of depending on pte dirty bit used by MADV_FREE. With these, no TLB flush is > required till page reclaim actually frees the memory (page reclaim need do the > TLB flush for MADV_FREE too). It still preserves the lazy memory free merit of > MADV_FREE. > > Compared to MADV_FREE, reusing memory with the new proposal isn't transparent, > eg must call MARK_NOFREE. But it's easy to utilize the new API in jemalloc. > > We don't have code to backup this yet, sorry. We'd like to discuss it if it > makes sense. It's really what volatile range did. John Stultz and me tried it for a *long* time but it had lots of troubles. It's really hard to write it down in my time due to really long history and even I forgot lots of detail(ie, dead brain). Please search volatile ranges in google. Finally, people in LSF/MM suggested MADV_FREE to help anonymous page side rather than stucking hich prevent useful feature. :( > > Thanks, > Shaohua -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@xxxxxxxxx. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"dont@xxxxxxxxx"> email@xxxxxxxxx </a>