how can I solve this grep problem

[Özkan Pakdil <ozkan.pakdil@xxxxxxxxx>]

Hello

I was searching some strings in my disk yes I mean whole disk like this

find / -type f -exec grep -sl "access denied" {} \;

then I start seeing this messages

[121338.113923] do_IRQ: 3.228 No irq handler for vector (irq -1)

when I check the dmesg I saw some others and one of them was like this 

[ 6181.655960] grep: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case.  If you have one, please send an email to linux-mm@xxxxxxxxx.

this is why I am sending this email. how can I solve this message ?

thanks

all dmesg output:

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Initializing cgroup subsys cpuacct

[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04)

[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=879fd989-f331-4a17-a930-e3f003666d2e ro nomodeset

[    0.000000] e820: BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable

[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable

[    0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf78dfff] ACPI data

[    0.000000] BIOS-e820: [mem 0x00000000bf78e000-0x00000000bf7cffff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000bf7d0000-0x00000000bf7dffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000bf7ec000-0x00000000bfffffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000c3fffffff] usable

[    0.000000] NX (Execute Disable) protection: active

[    0.000000] SMBIOS 2.5 present.

[    0.000000] DMI: MSI MS-7522/MSI X58 Pro (MS-7522)  , BIOS V8.14B8 11/09/2012

[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.000000] AGP: No AGP bridge found

[    0.000000] e820: last_pfn = 0xc40000 max_arch_pfn = 0x400000000

[    0.000000] MTRR default type: uncachable

[    0.000000] MTRR fixed ranges enabled:

[    0.000000]   00000-9FFFF write-back

[    0.000000]   A0000-BFFFF uncachable

[    0.000000]   C0000-CFFFF write-protect

[    0.000000]   D0000-DFFFF uncachable

[    0.000000]   E0000-E3FFF write-protect

[    0.000000]   E4000-E7FFF write-through

[    0.000000]   E8000-EBFFF write-protect

[    0.000000]   EC000-EFFFF write-through

[    0.000000]   F0000-FFFFF write-protect

[    0.000000] MTRR variable ranges enabled:

[    0.000000]   0 base 000000000 mask 800000000 write-back

[    0.000000]   1 base 800000000 mask C00000000 write-back

[    0.000000]   2 base C00000000 mask FC0000000 write-back

[    0.000000]   3 base 0C0000000 mask FC0000000 uncachable

[    0.000000]   4 base 0BF800000 mask FFF800000 uncachable

[    0.000000]   5 disabled

[    0.000000]   6 disabled

[    0.000000]   7 disabled

[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

[    0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved

[    0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000

[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]

[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576

[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]

[    0.000000]  [mem 0x00000000-0x000fffff] page 4k

[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE

[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE

[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE

[    0.000000] init_memory_mapping: [mem 0xc3fe00000-0xc3fffffff]

[    0.000000]  [mem 0xc3fe00000-0xc3fffffff] page 2M

[    0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE

[    0.000000] init_memory_mapping: [mem 0xc3c000000-0xc3fdfffff]

[    0.000000]  [mem 0xc3c000000-0xc3fdfffff] page 2M

[    0.000000] init_memory_mapping: [mem 0xc00000000-0xc3bffffff]

[    0.000000]  [mem 0xc00000000-0xc3bffffff] page 2M

[    0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]

[    0.000000]  [mem 0x00100000-0x001fffff] page 4k

[    0.000000]  [mem 0x00200000-0xbf5fffff] page 2M

[    0.000000]  [mem 0xbf600000-0xbf77ffff] page 4k

[    0.000000] init_memory_mapping: [mem 0x100000000-0xbffffffff]

[    0.000000]  [mem 0x100000000-0xbffffffff] page 2M

[    0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE

[    0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE

[    0.000000] RAMDISK: [mem 0x35f1c000-0x36f85fff]

[    0.000000] ACPI: Early table checksum verification disabled

[    0.000000] ACPI: RSDP 0x00000000000FA590 000014 (v00 ACPIAM)

[    0.000000] ACPI: RSDT 0x00000000BF780000 00003C (v01 7522MT A7522800 20120925 MSFT 00000097)

[    0.000000] ACPI: FACP 0x00000000BF780200 000084 (v01 7522MT A7522800 20120925 MSFT 00000097)

[    0.000000] ACPI: DSDT 0x00000000BF780480 006E82 (v01 A7522  A7522800 00000800 INTL 20051117)

[    0.000000] ACPI: FACS 0x00000000BF78E000 000040

[    0.000000] ACPI: APIC 0x00000000BF780390 0000AC (v01 7522MT A7522800 20120925 MSFT 00000097)

[    0.000000] ACPI: MCFG 0x00000000BF780440 00003C (v01 7522MT OEMMCFG  20120925 MSFT 00000097)

[    0.000000] ACPI: OEMB 0x00000000BF78E040 00007A (v01 7522MT A7522800 20120925 MSFT 00000097)

[    0.000000] ACPI: HPET 0x00000000BF78A480 000038 (v01 7522MT OEMHPET  20120925 MSFT 00000097)

[    0.000000] ACPI: SSDT 0x00000000BF790560 000363 (v01 DpgPmm CpuPm    00000012 INTL 20051117)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] No NUMA configuration found

[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000c3fffffff]

[    0.000000] Initmem setup node 0 [mem 0x00000000-0xc3fffffff]

[    0.000000]   NODE_DATA [mem 0xc3ffce000-0xc3ffd2fff]

[    0.000000]  [ffffea0000000000-ffffea002adfffff] PMD -> [ffff880c0f600000-ffff880c395fffff] on node 0

[    0.000000] Zone ranges:

[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]

[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]

[    0.000000]   Normal   [mem 0x100000000-0xc3fffffff]

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]

[    0.000000]   node   0: [mem 0x00100000-0xbf77ffff]

[    0.000000]   node   0: [mem 0x100000000-0xc3fffffff]

[    0.000000] On node 0 totalpages: 12580637

[    0.000000]   DMA zone: 56 pages used for memmap

[    0.000000]   DMA zone: 21 pages reserved

[    0.000000]   DMA zone: 3997 pages, LIFO batch:0

[    0.000000]   DMA32 zone: 10667 pages used for memmap

[    0.000000]   DMA32 zone: 780160 pages, LIFO batch:31

[    0.000000]   Normal zone: 161280 pages used for memmap

[    0.000000]   Normal zone: 11796480 pages, LIFO batch:31

[    0.000000] ACPI: PM-Timer IO Port: 0x808

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)

[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])

[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ2 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000

[    0.000000] smpboot: Allowing 12 CPUs, 4 hotplug CPUs

[    0.000000] nr_irqs_gsi: 40

[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]

[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]

[    0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf78dfff]

[    0.000000] PM: Registered nosave memory: [mem 0xbf78e000-0xbf7cffff]

[    0.000000] PM: Registered nosave memory: [mem 0xbf7d0000-0xbf7dffff]

[    0.000000] PM: Registered nosave memory: [mem 0xbf7e0000-0xbf7ebfff]

[    0.000000] PM: Registered nosave memory: [mem 0xbf7ec000-0xbfffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]

[    0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices

[    0.000000] Booting paravirtualized kernel on bare hardware

[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1

[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff880c3fc00000 s80896 r8192 d21504 u131072

[    0.000000] pcpu-alloc: s80896 r8192 d21504 u131072 alloc=1*2097152

[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- -- 

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 12408613

[    0.000000] Policy zone: Normal

[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=879fd989-f331-4a17-a930-e3f003666d2e ro nomodeset

[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[    0.000000] AGP: Checking aperture...

[    0.000000] AGP: No AGP bridge found

[    0.000000] Calgary: detecting Calgary via BIOS EBDA area

[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!

[    0.000000] Memory: 49538472K/50322548K available (5209K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 784076K reserved)

[    0.000000] Hierarchical RCU implementation.

[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.

[    0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=12.

[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12

[    0.000000] NR_IRQS:33024 nr_irqs:776 16

[    0.000000] Console: colour VGA+ 80x25

[    0.000000] console [tty0] enabled

[    0.000000] hpet clockevent registered

[    0.000000] tsc: Fast TSC calibration failed

[    0.000000] tsc: PIT calibration matches HPET. 1 loops

[    0.000000] tsc: Detected 2806.961 MHz processor

[    0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 5613.92 BogoMIPS (lpj=11227844)

[    0.000147] pid_max: default: 32768 minimum: 301

[    0.000211] ACPI: Core revision 20140424

[    0.005912] ACPI: All ACPI Tables successfully acquired

[    0.029909] Security Framework initialized

[    0.029973] AppArmor: AppArmor disabled by boot time parameter

[    0.030039] Yama: disabled by default; enable with sysctl kernel.yama.*

[    0.034285] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)

[    0.046946] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)

[    0.052343] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)

[    0.052475] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)

[    0.053070] Initializing cgroup subsys memory

[    0.053131] Initializing cgroup subsys devices

[    0.053194] Initializing cgroup subsys freezer

[    0.053252] Initializing cgroup subsys net_cls

[    0.053312] Initializing cgroup subsys blkio

[    0.053370] Initializing cgroup subsys perf_event

[    0.053428] Initializing cgroup subsys net_prio

[    0.053510] CPU: Physical Processor ID: 0

[    0.053565] CPU: Processor Core ID: 0

[    0.053624] mce: CPU supports 9 MCE banks

[    0.053692] CPU0: Thermal monitoring enabled (TM1)

[    0.053755] process: using mwait in idle threads

[    0.053814] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7

Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0

tlb_flushall_shift: 6

[    0.054001] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)

[    0.055213] ftrace: allocating 21623 entries in 85 pages

[    0.065126] Switched APIC routing to physical flat.

[    0.065564] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.105326] smpboot: CPU0: Intel(R) Core(TM) i7 CPU         930  @ 2.80GHz (fam: 06, model: 1a, stepping: 05)

[    0.210111] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.

[    0.210333] perf_event_intel: CPU erratum AAJ80 worked around

[    0.210392] perf_event_intel: CPUID marked event: 'bus cycles' unavailable

[    0.210454] ... version:                3

[    0.210509] ... bit width:              48

[    0.210564] ... generic registers:      4

[    0.210619] ... value mask:             0000ffffffffffff

[    0.210676] ... max period:             000000007fffffff

[    0.210734] ... fixed-purpose events:   3

[    0.210789] ... event mask:             000000070000000f

[    0.212392] x86: Booting SMP configuration:

[    0.212449] .... node  #0, CPUs:        #1

[    0.225819] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.

[    0.226067]   #2  #3  #4  #5  #6  #7

[    0.307401] x86: Booted up 1 node, 8 CPUs

[    0.307507] smpboot: Total of 8 processors activated (44911.37 BogoMIPS)

[    0.313395] devtmpfs: initialized

[    0.321002] PM: Registering ACPI NVS region [mem 0xbf78e000-0xbf7cffff] (270336 bytes)

[    0.321966] pinctrl core: initialized pinctrl subsystem

[    0.322097] NET: Registered protocol family 16

[    0.322260] cpuidle: using governor ladder

[    0.322316] cpuidle: using governor menu

[    0.322404] ACPI: bus type PCI registered

[    0.322460] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[    0.322601] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[    0.322681] PCI: not using MMCONFIG

[    0.322735] PCI: Using configuration type 1 for base access

[    0.334566] ACPI: Added _OSI(Module Device)

[    0.334623] ACPI: Added _OSI(Processor Device)

[    0.334679] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.334735] ACPI: Added _OSI(Processor Aggregator Device)

[    0.336166] ACPI: Executed 1 blocks of module-level executable AML code

[    0.338902] ACPI: Dynamic OEM Table Load:

[    0.339031] ACPI: SSDT 0xFFFF880C0E24C000 001E1C (v01 DpgPmm P001Ist  00000011 INTL 20051117)

[    0.339673] ACPI: Dynamic OEM Table Load:

[    0.339796] ACPI: SSDT 0xFFFF880C0E213800 000678 (v01 PmRef  P001Cst  00003001 INTL 20051117)

[    0.349953] ACPI: Interpreter enabled

[    0.350014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)

[    0.350160] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)

[    0.350314] ACPI: (supports S0 S1 S4 S5)

[    0.350369] ACPI: Using IOAPIC for interrupt routing

[    0.350448] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[    0.351026] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources

[    0.351573] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.357224] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[    0.357287] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

[    0.357520] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]

[    0.357656] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]

[    0.357735] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]

[    0.357812] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]

[    0.357888] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM

[    0.358228] PCI host bridge to bus 0000:00

[    0.358285] pci_bus 0000:00: root bus resource [bus 00-ff]

[    0.358346] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]

[    0.358405] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]

[    0.358464] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]

[    0.358525] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]

[    0.358585] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]

[    0.358645] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]

[    0.358715] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000

[    0.358770] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold

[    0.358847] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400

[    0.358901] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

[    0.358944] pci 0000:00:01.0: System wakeup disabled by ACPI

[    0.359040] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400

[    0.359097] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold

[    0.359140] pci 0000:00:03.0: System wakeup disabled by ACPI

[    0.359237] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400

[    0.359290] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold

[    0.359331] pci 0000:00:07.0: System wakeup disabled by ACPI

[    0.359432] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000

[    0.359537] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000

[    0.359639] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000

[    0.359740] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000

[    0.359835] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300

[    0.359874] pci 0000:00:1a.0: reg 0x20: [io  0xbc00-0xbc1f]

[    0.359956] pci 0000:00:1a.0: System wakeup disabled by ACPI

[    0.360052] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300

[    0.360090] pci 0000:00:1a.1: reg 0x20: [io  0xb880-0xb89f]

[    0.360171] pci 0000:00:1a.1: System wakeup disabled by ACPI

[    0.360266] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300

[    0.360304] pci 0000:00:1a.2: reg 0x20: [io  0xb800-0xb81f]

[    0.360385] pci 0000:00:1a.2: System wakeup disabled by ACPI

[    0.360488] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320

[    0.360507] pci 0000:00:1a.7: reg 0x10: [mem 0xf7ffe000-0xf7ffe3ff]

[    0.360591] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold

[    0.360635] pci 0000:00:1a.7: System wakeup disabled by ACPI

[    0.360730] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400

[    0.360796] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[    0.360840] pci 0000:00:1c.0: System wakeup disabled by ACPI

[    0.360936] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400

[    0.361006] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold

[    0.361050] pci 0000:00:1c.4: System wakeup disabled by ACPI

[    0.361146] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300

[    0.361185] pci 0000:00:1d.0: reg 0x20: [io  0xb480-0xb49f]

[    0.361265] pci 0000:00:1d.0: System wakeup disabled by ACPI

[    0.361360] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300

[    0.361400] pci 0000:00:1d.1: reg 0x20: [io  0xb400-0xb41f]

[    0.361480] pci 0000:00:1d.1: System wakeup disabled by ACPI

[    0.361575] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300

[    0.361613] pci 0000:00:1d.2: reg 0x20: [io  0xb080-0xb09f]

[    0.361694] pci 0000:00:1d.2: System wakeup disabled by ACPI

[    0.361797] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320

[    0.361817] pci 0000:00:1d.7: reg 0x10: [mem 0xf7ffc000-0xf7ffc3ff]

[    0.361900] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold

[    0.361944] pci 0000:00:1d.7: System wakeup disabled by ACPI

[    0.362037] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401

[    0.362111] pci 0000:00:1e.0: System wakeup disabled by ACPI

[    0.362208] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100

[    0.362281] pci 0000:00:1f.0: can't claim BAR 13 [io  0x0800-0x087f]: address conflict with ACPI CPU throttle [io  0x0810-0x0815]

[    0.362370] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO

[    0.362432] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)

[    0.362510] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a00 (mask 0017)

[    0.362588] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 00ff)

[    0.362760] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601

[    0.362777] pci 0000:00:1f.2: reg 0x10: [io  0xb000-0xb007]

[    0.362784] pci 0000:00:1f.2: reg 0x14: [io  0xac00-0xac03]

[    0.362791] pci 0000:00:1f.2: reg 0x18: [io  0xa880-0xa887]

[    0.362798] pci 0000:00:1f.2: reg 0x1c: [io  0xa800-0xa803]

[    0.362804] pci 0000:00:1f.2: reg 0x20: [io  0xa480-0xa49f]

[    0.362811] pci 0000:00:1f.2: reg 0x24: [mem 0xf7ffa000-0xf7ffa7ff]

[    0.362853] pci 0000:00:1f.2: PME# supported from D3hot

[    0.362926] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500

[    0.362940] pci 0000:00:1f.3: reg 0x10: [mem 0xf7ff9c00-0xf7ff9cff 64bit]

[    0.362958] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]

[    0.363074] pci 0000:00:01.0: PCI bridge to [bus 01]

[    0.363185] pci 0000:02:00.0: [10de:06e4] type 00 class 0x030000

[    0.363195] pci 0000:02:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]

[    0.363203] pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]

[    0.363212] pci 0000:02:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]

[    0.363218] pci 0000:02:00.0: reg 0x24: [io  0xcc00-0xcc7f]

[    0.363224] pci 0000:02:00.0: reg 0x30: [mem 0xfbce0000-0xfbcfffff pref]

[    0.370309] pci 0000:00:03.0: PCI bridge to [bus 02]

[    0.370373] pci 0000:00:03.0:   bridge window [io  0xc000-0xcfff]

[    0.370379] pci 0000:00:03.0:   bridge window [mem 0xf8000000-0xfbcfffff]

[    0.370384] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]

[    0.370428] pci 0000:00:07.0: PCI bridge to [bus 03]

[    0.370536] pci 0000:00:1c.0: PCI bridge to [bus 04]

[    0.370662] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000

[    0.370681] pci 0000:06:00.0: reg 0x10: [io  0xe800-0xe8ff]

[    0.370707] pci 0000:06:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit]

[    0.370723] pci 0000:06:00.0: reg 0x20: [mem 0xf6ff0000-0xf6ffffff 64bit pref]

[    0.370735] pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]

[    0.370812] pci 0000:06:00.0: supports D1 D2

[    0.370813] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.378320] pci 0000:00:1c.4: PCI bridge to [bus 06]

[    0.378387] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]

[    0.378390] pci 0000:00:1c.4:   bridge window [mem 0xfbe00000-0xfbefffff]

[    0.378395] pci 0000:00:1c.4:   bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]

[    0.378463] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)

[    0.378530] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)

[    0.378532] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)

[    0.378533] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)

[    0.378535] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)

[    0.378536] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)

[    0.378538] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)

[    0.378972] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)

[    0.379431] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)

[    0.379626] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)

[    0.380085] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)

[    0.380541] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.

[    0.381079] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)

[    0.381536] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.

[    0.382075] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15)

[    0.382537] ACPI: Enabled 1 GPEs in block 00 to 3F

[    0.382748] vgaarb: setting as boot device: PCI:0000:02:00.0

[    0.382807] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none

[    0.382884] vgaarb: loaded

[    0.382936] vgaarb: bridge control possible 0000:02:00.0

[    0.383041] PCI: Using ACPI for IRQ routing

[    0.388801] PCI: Discovered peer bus ff

[    0.388856] PCI: root bus ff: using default resources

[    0.388857] PCI: Probing PCI hardware (bus ff)

[    0.388883] PCI host bridge to bus 0000:ff

[    0.388939] pci_bus 0000:ff: root bus resource [io  0x0000-0xffff]

[    0.388998] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]

[    0.389059] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]

[    0.389136] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])

[    0.389141] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000

[    0.389182] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000

[    0.389221] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000

[    0.389258] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000

[    0.389297] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000

[    0.389334] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000

[    0.389371] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000

[    0.389409] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000

[    0.389446] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000

[    0.389483] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000

[    0.389520] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000

[    0.389558] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000

[    0.389596] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000

[    0.389633] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000

[    0.389670] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000

[    0.389709] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000

[    0.389746] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000

[    0.389782] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000

[    0.389818] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000

[    0.389864] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff

[    0.389866] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])

[    0.389869] PCI: pci_cache_line_size set to 64 bytes

[    0.389928] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]

[    0.389930] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]

[    0.390038] HPET: 4 timers in total, 0 timers will be used for per-cpu timer

[    0.390102] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0

[    0.390325] hpet0: 4 comparators, 64-bit 14.318180 MHz counter

[    0.392557] Switched to clocksource hpet

[    0.397105] pnp: PnP ACPI init

[    0.397169] ACPI: bus type PNP registered

[    0.397281] system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved

[    0.397342] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved

[    0.397402] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved

[    0.397463] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved

[    0.397523] system 00:00: [mem 0xfec8a000-0xfec8afff] has been reserved

[    0.397583] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved

[    0.397644] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.397700] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.397823] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)

[    0.397934] system 00:03: [io  0x0a00-0x0adf] has been reserved

[    0.397993] system 00:03: [io  0x0ae0-0x0aef] has been reserved

[    0.398053] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.398200] system 00:04: [io  0x04d0-0x04d1] has been reserved

[    0.398260] system 00:04: [io  0x0800-0x087f] could not be reserved

[    0.398320] system 00:04: [io  0x0500-0x057f] could not be reserved

[    0.398379] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved

[    0.398440] system 00:04: [mem 0xfed10000-0xfed103ff] has been reserved

[    0.398500] system 00:04: [mem 0xfed10400-0xfed107ff] has been reserved

[    0.398560] system 00:04: [mem 0xfed10800-0xfed10bff] has been reserved

[    0.398620] system 00:04: [mem 0xfed10c00-0xfed10fff] has been reserved

[    0.398680] system 00:04: [mem 0xfec8a000-0xfec8a3ff] has been reserved

[    0.398741] system 00:04: [mem 0xfec8a400-0xfec8a7ff] has been reserved

[    0.398801] system 00:04: [mem 0xfec8a800-0xfec8abff] has been reserved

[    0.398861] system 00:04: [mem 0xfec8ac00-0xfec8afff] has been reserved

[    0.398921] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved

[    0.398981] system 00:04: [mem 0xfed45000-0xfed89fff] has been reserved

[    0.399041] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved

[    0.399101] system 00:04: [mem 0xfed40000-0xfed8ffff] could not be reserved

[    0.399163] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.399275] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved

[    0.399337] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved

[    0.399397] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.399463] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved

[    0.399524] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.399696] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved

[    0.399758] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved

[    0.399819] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved

[    0.399880] system 00:07: [mem 0x00100000-0xbfffffff] could not be reserved

[    0.399941] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved

[    0.400002] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.400099] pnp: PnP ACPI: found 8 devices

[    0.400154] ACPI: bus type PNP unregistered

[    0.406391] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000

[    0.406394] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000

[    0.406396] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000

[    0.406413] pci 0000:00:1f.0: BAR 13: [io  0x0800-0x087f] has bogus alignment

[    0.406476] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000

[    0.406477] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000

[    0.406479] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000

[    0.406483] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]

[    0.406546] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]

[    0.406624] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]

[    0.406683] pci 0000:00:01.0: PCI bridge to [bus 01]

[    0.406746] pci 0000:00:03.0: PCI bridge to [bus 02]

[    0.406804] pci 0000:00:03.0:   bridge window [io  0xc000-0xcfff]

[    0.406865] pci 0000:00:03.0:   bridge window [mem 0xf8000000-0xfbcfffff]

[    0.406927] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]

[    0.407005] pci 0000:00:07.0: PCI bridge to [bus 03]

[    0.407068] pci 0000:00:1c.0: PCI bridge to [bus 04]

[    0.407126] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]

[    0.407187] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]

[    0.407248] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]

[    0.407329] pci 0000:06:00.0: BAR 6: assigned [mem 0xfbe00000-0xfbe1ffff pref]

[    0.407404] pci 0000:00:1c.4: PCI bridge to [bus 06]

[    0.407462] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]

[    0.407523] pci 0000:00:1c.4:   bridge window [mem 0xfbe00000-0xfbefffff]

[    0.407585] pci 0000:00:1c.4:   bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]

[    0.407664] pci 0000:00:1e.0: PCI bridge to [bus 07]

[    0.407728] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]

[    0.407730] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]

[    0.407731] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]

[    0.407733] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]

[    0.407734] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]

[    0.407736] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]

[    0.407737] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]

[    0.407739] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbcfffff]

[    0.407740] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]

[    0.407742] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]

[    0.407743] pci_bus 0000:04: resource 1 [mem 0xc0000000-0xc01fffff]

[    0.407745] pci_bus 0000:04: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]

[    0.407746] pci_bus 0000:06: resource 0 [io  0xe000-0xefff]

[    0.407747] pci_bus 0000:06: resource 1 [mem 0xfbe00000-0xfbefffff]

[    0.407749] pci_bus 0000:06: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]

[    0.407750] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7]

[    0.407752] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff]

[    0.407753] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]

[    0.407755] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]

[    0.407756] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff]

[    0.407757] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]

[    0.407760] pci_bus 0000:ff: resource 4 [io  0x0000-0xffff]

[    0.407761] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]

[    0.407843] NET: Registered protocol family 2

[    0.408337] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)

[    0.409261] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[    0.409451] TCP: Hash tables configured (established 524288 bind 65536)

[    0.409528] TCP: reno registered

[    0.409633] UDP hash table entries: 32768 (order: 8, 1048576 bytes)

[    0.409902] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)

[    0.410216] NET: Registered protocol family 1

[    0.411759] pci 0000:02:00.0: Video device with shadowed ROM

[    0.411782] PCI: CLS 256 bytes, default 64

[    0.411826] Unpacking initramfs...

[    0.685150] Freeing initrd memory: 16808K (ffff880035f1c000 - ffff880036f86000)

[    0.685245] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[    0.685306] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]

[    0.685726] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11

[    0.685789] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11

[    0.685853] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11

[    0.685917] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11

[    0.685981] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x11

[    0.686045] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x11

[    0.686107] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x11

[    0.686170] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x11

[    0.686274] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba

[    0.686695] futex hash table entries: 4096 (order: 6, 262144 bytes)

[    0.686814] audit: initializing netlink subsys (disabled)

[    0.686887] audit: type=2000 audit(1442052872.568:1): initialized

[    0.687275] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[    0.687353] zbud: loaded

[    0.688318] VFS: Disk quotas dquot_6.5.2

[    0.688394] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    0.688509] msgmni has been set to 32768

[    0.688841] alg: No test for stdrng (krng)

[    0.688922] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

[    0.689048] io scheduler noop registered

[    0.689103] io scheduler deadline registered

[    0.689199] io scheduler cfq registered (default)

[    0.689444] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)

[    0.689637] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X

[    0.689798] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X

[    0.689881] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[    0.689952] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[    0.690027] intel_idle: MWAIT substates: 0x1120

[    0.690037] intel_idle: v0.4 model 0x1A

[    0.690038] intel_idle: lapic_timer_reliable_states 0x2

[    0.690338] GHES: HEST is not enabled!

[    0.690456] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    0.690896] Linux agpgart interface v0.103

[    0.691074] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1

[    0.691135] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp

[    0.691907] serio: i8042 KBD port at 0x60,0x64 irq 1

[    0.692060] mousedev: PS/2 mouse device common for all mice

[    0.692158] rtc_cmos 00:01: RTC can wake from S4

[    0.692328] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0

[    0.692410] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs

[    0.692499] ledtrig-cpu: registered to indicate activity on CPUs

[    0.692784] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@xxxxxxx>

[    0.692844] AMD IOMMUv2 functionality not available on this system

[    0.692977] TCP: cubic registered

[    0.693152] NET: Registered protocol family 10

[    0.693442] mip6: Mobile IPv6

[    0.693497] NET: Registered protocol family 17

[    0.693556] mpls_gso: MPLS GSO support

[    0.693942] registered taskstats version 1

[    0.694481] rtc_cmos 00:01: setting system clock to 2015-09-12 10:14:33 UTC (1442052873)

[    0.694603] PM: Hibernation image not present or could not be loaded.

[    0.695367] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)

[    0.695444] Write protecting the kernel read-only data: 8192k

[    0.698179] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)

[    0.699167] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)

[    0.709484] systemd-udevd[96]: starting version 215

[    0.709760] random: systemd-udevd urandom read with 1 bits of entropy available

[    0.724390] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[    0.724460] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control

[    0.724757] r8169 0000:06:00.0: irq 42 for MSI/MSI-X

[    0.724782] ACPI: bus type USB registered

[    0.724874] usbcore: registered new interface driver usbfs

[    0.724918] r8169 0000:06:00.0 eth0: RTL8168c/8111c at 0xffffc90000008000, 6c:62:6d:60:73:4d, XID 1c4000c0 IRQ 42

[    0.724919] r8169 0000:06:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]

[    0.725116] usbcore: registered new interface driver hub

[    0.725328] usbcore: registered new device driver usb

[    0.725592] SCSI subsystem initialized

[    0.725958] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    0.726383] ehci-pci: EHCI PCI platform driver

[    0.726597] ehci-pci 0000:00:1a.7: EHCI Host Controller

[    0.726626] uhci_hcd: USB Universal Host Controller Interface driver

[    0.726727] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1

[    0.726817] ehci-pci 0000:00:1a.7: debug port 1

[    0.727413] libata version 3.00 loaded.

[    0.730767] ehci-pci 0000:00:1a.7: cache line size of 256 is not supported

[    0.730783] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf7ffe000

[    0.740766] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00

[    0.740878] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    0.740943] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.741022] usb usb1: Product: EHCI Host Controller

[    0.741083] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd

[    0.741144] usb usb1: SerialNumber: 0000:00:1a.7

[    0.741330] hub 1-0:1.0: USB hub found

[    0.741396] hub 1-0:1.0: 6 ports detected

[    0.741755] ehci-pci 0000:00:1d.7: EHCI Host Controller

[    0.741822] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2

[    0.741913] ehci-pci 0000:00:1d.7: debug port 1

[    0.745880] ehci-pci 0000:00:1d.7: cache line size of 256 is not supported

[    0.745895] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7ffc000

[    0.749975] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[    0.756763] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00

[    0.756846] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

[    0.756906] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.756982] usb usb2: Product: EHCI Host Controller

[    0.757038] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd

[    0.757097] usb usb2: SerialNumber: 0000:00:1d.7

[    0.757287] hub 2-0:1.0: USB hub found

[    0.757347] hub 2-0:1.0: 6 ports detected

[    0.757738] uhci_hcd 0000:00:1a.0: UHCI Host Controller

[    0.757803] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3

[    0.757888] uhci_hcd 0000:00:1a.0: detected 2 ports

[    0.757977] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00

[    0.758101] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001

[    0.758164] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.758240] usb usb3: Product: UHCI Host Controller

[    0.758297] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd

[    0.758355] usb usb3: SerialNumber: 0000:00:1a.0

[    0.758626] hub 3-0:1.0: USB hub found

[    0.758685] hub 3-0:1.0: 2 ports detected

[    0.758911] uhci_hcd 0000:00:1a.1: UHCI Host Controller

[    0.758972] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4

[    0.759051] uhci_hcd 0000:00:1a.1: detected 2 ports

[    0.759131] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880

[    0.759224] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001

[    0.759285] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.759360] usb usb4: Product: UHCI Host Controller

[    0.759417] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd

[    0.759476] usb usb4: SerialNumber: 0000:00:1a.1

[    0.759737] hub 4-0:1.0: USB hub found

[    0.759796] hub 4-0:1.0: 2 ports detected

[    0.760015] uhci_hcd 0000:00:1a.2: UHCI Host Controller

[    0.760076] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5

[    0.760156] uhci_hcd 0000:00:1a.2: detected 2 ports

[    0.760236] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800

[    0.760327] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001

[    0.760388] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.760463] usb usb5: Product: UHCI Host Controller

[    0.760519] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd

[    0.760578] usb usb5: SerialNumber: 0000:00:1a.2

[    0.760787] hub 5-0:1.0: USB hub found

[    0.760846] hub 5-0:1.0: 2 ports detected

[    0.761063] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[    0.761124] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6

[    0.761204] uhci_hcd 0000:00:1d.0: detected 2 ports

[    0.761276] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480

[    0.761367] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001

[    0.761428] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.761503] usb usb6: Product: UHCI Host Controller

[    0.761560] usb usb6: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd

[    0.761619] usb usb6: SerialNumber: 0000:00:1d.0

[    0.761870] hub 6-0:1.0: USB hub found

[    0.761929] hub 6-0:1.0: 2 ports detected

[    0.762149] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[    0.762210] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7

[    0.762290] uhci_hcd 0000:00:1d.1: detected 2 ports

[    0.762362] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400

[    0.762455] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001

[    0.762516] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.762591] usb usb7: Product: UHCI Host Controller

[    0.762648] usb usb7: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd

[    0.762707] usb usb7: SerialNumber: 0000:00:1d.1

[    0.762948] hub 7-0:1.0: USB hub found

[    0.763007] hub 7-0:1.0: 2 ports detected

[    0.763227] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[    0.763288] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8

[    0.763368] uhci_hcd 0000:00:1d.2: detected 2 ports

[    0.763440] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080

[    0.763533] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001

[    0.763593] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.763669] usb usb8: Product: UHCI Host Controller

[    0.763726] usb usb8: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd

[    0.763785] usb usb8: SerialNumber: 0000:00:1d.2

[    0.764030] hub 8-0:1.0: USB hub found

[    0.764090] hub 8-0:1.0: 2 ports detected

[    0.764283] ahci 0000:00:1f.2: version 3.0

[    0.764427] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X

[    0.764452] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled

[    0.764550] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode

[    0.764632] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 

[    0.809712] scsi0 : ahci

[    0.810781] scsi1 : ahci

[    0.811193] scsi2 : ahci

[    0.811533] scsi3 : ahci

[    0.811928] scsi4 : ahci

[    0.812344] scsi5 : ahci

[    0.813152] ata1: SATA max UDMA/133 abar m2048@0xf7ffa000 port 0xf7ffa100 irq 43

[    0.813229] ata2: SATA max UDMA/133 abar m2048@0xf7ffa000 port 0xf7ffa180 irq 43

[    0.813306] ata3: SATA max UDMA/133 abar m2048@0xf7ffa000 port 0xf7ffa200 irq 43

[    0.813382] ata4: SATA max UDMA/133 abar m2048@0xf7ffa000 port 0xf7ffa280 irq 43

[    0.813458] ata5: SATA max UDMA/133 abar m2048@0xf7ffa000 port 0xf7ffa300 irq 43

[    0.813533] ata6: SATA max UDMA/133 abar m2048@0xf7ffa000 port 0xf7ffa380 irq 43

[    1.133104] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[    1.134220] ata1.00: ATA-8: WDC WD2000FYYZ-01UL1B1, 01.01K02, max UDMA/133

[    1.134289] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA

[    1.135778] ata1.00: configured for UDMA/133

[    1.136153] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2000FYYZ-0 1K02 PQ: 0 ANSI: 5

[    1.453273] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[    1.454361] ata2.00: ATA-8: WDC WD2000FYYZ-01UL1B1, 01.01K02, max UDMA/133

[    1.454429] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA

[    1.455992] ata2.00: configured for UDMA/133

[    1.456328] scsi 1:0:0:0: Direct-Access     ATA      WDC WD2000FYYZ-0 1K02 PQ: 0 ANSI: 5

[    1.685330] tsc: Refined TSC clocksource calibration: 2806.964 MHz

[    1.777441] ata3: SATA link down (SStatus 0 SControl 300)

[    2.097612] ata4: SATA link down (SStatus 0 SControl 300)

[    2.417777] ata5: SATA link down (SStatus 0 SControl 300)

[    2.686208] Switched to clocksource tsc

[    2.737980] ata6: SATA link down (SStatus 0 SControl 300)

[    2.771037] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)

[    2.771051] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)

[    2.771074] sd 1:0:0:0: [sdb] Write Protect is off

[    2.771075] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00

[    2.771085] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    2.771348] sd 0:0:0:0: [sda] Write Protect is off

[    2.771405] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    2.771416] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    2.780668]  sda: sda1 sda2 sda3

[    2.780917] sd 0:0:0:0: [sda] Attached SCSI disk

[    2.782276] sd 0:0:0:0: Attached scsi generic sg0 type 0

[    2.782367] sd 1:0:0:0: Attached scsi generic sg1 type 0

[    2.790178]  sdb: sdb1 sdb2 sdb3

[    2.790432] sd 1:0:0:0: [sdb] Attached SCSI disk

[    2.925798] md: bind<sdb2>

[    2.929991] md: bind<sda3>

[    2.930650] md: bind<sda1>

[    2.931388] md: bind<sdb1>

[    2.934077] md: raid1 personality registered for level 1

[    2.935011] md/raid1:md0: active with 2 out of 2 mirrors

[    2.935109] md0: detected capacity change from 0 to 25752895488

[    2.942184] md: bind<sda2>

[    2.943774] md/raid1:md1: active with 2 out of 2 mirrors

[    2.943867] md1: detected capacity change from 0 to 536543232

[    2.944257]  md1: unknown partition table

[    2.945848]  md0: unknown partition table

[    2.990152] md: bind<sdb3>

[    2.993032] md/raid1:md2: not clean -- starting background reconstruction

[    2.993099] md/raid1:md2: active with 2 out of 2 mirrors

[    2.993180] md2: detected capacity change from 0 to 1973953691648

[    3.001503]  md2: unknown partition table

[    3.066972] device-mapper: uevent: version 1.0.3

[    3.067131] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx

[    3.138013] raid6: sse2x1    6911 MB/s

[    3.206046] raid6: sse2x2    8146 MB/s

[    3.274085] raid6: sse2x4    9066 MB/s

[    3.274189] raid6: using algorithm sse2x4 (9066 MB/s)

[    3.274247] raid6: using ssse3x2 recovery algorithm

[    3.276368] xor: measuring software checksum speed

[    3.314102]    prefetch64-sse: 11488.000 MB/sec

[    3.354123]    generic_sse: 10139.000 MB/sec

[    3.354228] xor: using function: prefetch64-sse (11488.000 MB/sec)

[    3.359057] Btrfs loaded

[    3.528899] PM: Starting manual resume from disk

[    3.528958] PM: Hibernation image partition 9:0 present

[    3.528960] PM: Looking for hibernation image.

[    3.529057] PM: Image not found (code -22)

[    3.529060] PM: Hibernation image not present or could not be loaded.

[    3.637328] md: resync of RAID array md2

[    3.637390] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.

[    3.637452] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.

[    3.637537] md: using 128k window, over a total of 1927689152k.

[    3.637595] md: resuming resync of md2 from checkpoint.

[    3.676739] random: nonblocking pool is initialized

[    3.741318] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null)

[    4.184259] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)

[    4.184507] systemd[1]: Detected architecture 'x86-64'.

[    4.308631] systemd[1]: Inserted module 'autofs4'

[    4.316048] systemd[1]: Set hostname to <Debian-81-jessie-64-minimal>.

[    4.324893] systemd[1]: Initializing machine ID from random generator.

[    4.324996] systemd[1]: Installed transient /etc/machine-id file.

[    4.713240] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.

[    4.713586] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.

[    4.713707] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[    4.713791] systemd[1]: Starting Remote File Systems (Pre).

[    4.714126] systemd[1]: Reached target Remote File Systems (Pre).

[    4.714204] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.

[    4.714594] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.

[    4.714685] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.

[    4.714784] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.

[    4.714879] systemd[1]: Starting Paths.

[    4.715186] systemd[1]: Reached target Paths.

[    4.715249] systemd[1]: Expecting device dev-md-0.device...

[    4.715487] systemd[1]: Expecting device dev-md-1.device...

[    4.715725] systemd[1]: Starting Root Slice.

[    4.716042] systemd[1]: Created slice Root Slice.

[    4.716105] systemd[1]: Starting User and Session Slice.

[    4.716477] systemd[1]: Created slice User and Session Slice.

[    4.716543] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.

[    4.716880] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.

[    4.716948] systemd[1]: Starting Delayed Shutdown Socket.

[    4.717271] systemd[1]: Listening on Delayed Shutdown Socket.

[    4.717336] systemd[1]: Starting Journal Socket (/dev/log).

[    4.717665] systemd[1]: Listening on Journal Socket (/dev/log).

[    4.717731] systemd[1]: Starting LVM2 metadata daemon socket.

[    4.718058] systemd[1]: Listening on LVM2 metadata daemon socket.

[    4.718124] systemd[1]: Starting Device-mapper event daemon FIFOs.

[    4.743571] systemd[1]: Listening on Device-mapper event daemon FIFOs.

[    4.743642] systemd[1]: Starting udev Control Socket.

[    4.743966] systemd[1]: Listening on udev Control Socket.

[    4.744033] systemd[1]: Starting udev Kernel Socket.

[    4.744350] systemd[1]: Listening on udev Kernel Socket.

[    4.744416] systemd[1]: Starting Journal Socket.

[    4.744741] systemd[1]: Listening on Journal Socket.

[    4.744812] systemd[1]: Starting System Slice.

[    4.745180] systemd[1]: Created slice System Slice.

[    4.745246] systemd[1]: Starting system-getty.slice.

[    4.745622] systemd[1]: Created slice system-getty.slice.

[    4.745698] systemd[1]: Starting Increase datagram queue length...

[    4.746226] systemd[1]: Mounting POSIX Message Queue File System...

[    4.746737] systemd[1]: Starting udev Coldplug all Devices...

[    4.747505] systemd[1]: Started Set Up Additional Binary Formats.

[    4.748318] systemd[1]: Starting Create list of required static device nodes for the current kernel...

[    4.748920] systemd[1]: Mounting Debug File System...

[    4.749439] systemd[1]: Mounting Huge Pages File System...

[    4.761732] systemd[1]: Starting Load Kernel Modules...

[    4.762282] systemd[1]: Starting Slices.

[    4.762594] systemd[1]: Reached target Slices.

[    4.821476] systemd[1]: Started Increase datagram queue length.

[    4.821809] systemd[1]: Starting Syslog Socket.

[    4.822149] systemd[1]: Listening on Syslog Socket.

[    4.822215] systemd[1]: Starting Journal Service...

[    4.823034] systemd[1]: Started Journal Service.

[    5.141541] systemd-udevd[258]: starting version 215

[    5.460310] wmi: Mapper loaded

[    5.535388] EDAC MC: Ver: 3.0.0

[    5.595519] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[    5.607990] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)

[    5.608109] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)

[    5.608195] EDAC i7core: Driver loaded, 1 memory controller(s) found.

[    5.617162] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt

[    5.650060] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20140424/utaddress-258)

[    5.650235] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[    5.650333] lpc_ich: Resource conflict(s) found affecting gpio_ich

[    5.739062] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1

[    5.739160] ACPI: Power Button [PWRB]

[    5.739303] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2

[    5.739393] ACPI: Power Button [PWRF]

[    5.989189] iTCO_vendor_support: vendor-support=0

[    5.995542] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11

[    5.995625] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)

[    5.995917] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[    6.084667] [drm] Initialized drm 1.1.0 20060810

[    6.131944] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround

[    6.637843] Adding 25149308k swap on /dev/md0.  Priority:-1 extents:1 across:25149308k FS

[    6.949499] EXT4-fs (md2): re-mounted. Opts: (null)

[    6.996326] EXT4-fs (md1): mounting ext3 file system using the ext4 subsystem

[    7.051510] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)

[    7.093399] systemd-journald[242]: Received request to flush runtime journal from PID 1

[    7.541744] r8169 0000:06:00.0 eth0: link down

[    7.541854] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[    7.542021] r8169 0000:06:00.0 eth0: link down

[   10.577502] r8169 0000:06:00.0 eth0: link up

[   10.577574] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[   17.607886] ip_tables: (C) 2000-2006 Netfilter Core Team

[ 1368.818980] perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000

[ 4426.079842] do_IRQ: 3.35 No irq handler for vector (irq -1)

[ 6179.045866] WARNING! power/level is deprecated; use power/control instead

[ 6181.655960] grep: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case.  If you have one, please send an email to linux-mm@xxxxxxxxx.

[15302.826147] perf interrupt took too long (5095 > 5000), lowering kernel.perf_event_max_sample_rate to 25000

[18263.301729] do_IRQ: 2.93 No irq handler for vector (irq -1)

[23255.910251] do_IRQ: 0.80 No irq handler for vector (irq -1)

[25897.434281] do_IRQ: 0.179 No irq handler for vector (irq -1)

[29419.545609] do_IRQ: 0.153 No irq handler for vector (irq -1)

[30850.163556] do_IRQ: 2.227 No irq handler for vector (irq -1)

[34732.279281] do_IRQ: 3.206 No irq handler for vector (irq -1)

[36223.099314] do_IRQ: 0.153 No irq handler for vector (irq -1)

[43576.841059] do_IRQ: 0.45 No irq handler for vector (irq -1)

[44337.434825] do_IRQ: 0.35 No irq handler for vector (irq -1)

[48059.145357] do_IRQ: 0.155 No irq handler for vector (irq -1)

[60625.808903] do_IRQ: 2.70 No irq handler for vector (irq -1)

[63034.351559] md: md2: resync done.

[63034.423123] RAID1 conf printout:

[63034.423127]  --- wd:2 rd:2

[63034.423130]  disk 0, wo:0, o:1, dev:sda3

[63034.423133]  disk 1, wo:0, o:1, dev:sdb3

[63397.309458] do_IRQ: 1.39 No irq handler for vector (irq -1)

[70501.175555] do_IRQ: 2.198 No irq handler for vector (irq -1)

[72172.082120] do_IRQ: 0.236 No irq handler for vector (irq -1)

[72693.132497] do_IRQ: 1.111 No irq handler for vector (irq -1)

[84578.955758] do_IRQ: 1.160 No irq handler for vector (irq -1)

[87440.229370] do_IRQ: 2.62 No irq handler for vector (irq -1)

[96044.812114] do_IRQ: 1.164 No irq handler for vector (irq -1)

[96185.497298] list passed to list_sort() too long for efficiency

[120547.710208] do_IRQ: 1.193 No irq handler for vector (irq -1)

[121338.113923] do_IRQ: 3.228 No irq handler for vector (irq -1)

[129172.282348] do_IRQ: 0.160 No irq handler for vector (irq -1)

[131964.181384] do_IRQ: 2.108 No irq handler for vector (irq -1)

[135575.812350] do_IRQ: 1.92 No irq handler for vector (irq -1)

[143419.884584] do_IRQ: 3.187 No irq handler for vector (irq -1)