Re: [PATCH v7 0/7] Support Write-Through mapping on x86

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ingo, Peter, Thomas,

Is there anything else I need to do for accepting this patchset? 

Thanks,
-Toshi


On Tue, 2015-01-06 at 13:49 -0700, Toshi Kani wrote:
> This patchset adds support of Write-Through (WT) mapping on x86.
> The study below shows that using WT mapping may be useful for
> non-volatile memory.
> 
>   http://www.hpl.hp.com/techreports/2012/HPL-2012-236.pdf
> 
> All new/modified interfaces have been tested.
> 
> v7:
>  - Rebased to 3.19-rc3 as Juergen's patchset for the PAT management
>    has been accepted.
> 
> v6:
>  - Dropped the patch moving [set|get]_page_memtype() to pat.c
>    since the tip branch already has this change.
>  - Fixed an issue when CONFIG_X86_PAT is not defined.
> 
> v5:
>  - Clarified comment of why using slot 7. (Andy Lutomirski,
>    Thomas Gleixner)
>  - Moved [set|get]_page_memtype() to pat.c. (Thomas Gleixner)
>  - Removed BUG() from set_page_memtype(). (Thomas Gleixner)
> 
> v4:
>  - Added set_memory_wt() by adding WT support of regular memory.
> 
> v3:
>  - Dropped the set_memory_wt() patch. (Andy Lutomirski)
>  - Refactored the !pat_enabled handling. (H. Peter Anvin,
>    Andy Lutomirski)
>  - Added the picture of PTE encoding. (Konrad Rzeszutek Wilk)
> 
> v2:
>  - Changed WT to use slot 7 of the PAT MSR. (H. Peter Anvin,
>    Andy Lutomirski)
>  - Changed to have conservative checks to exclude all Pentium 2, 3,
>    M, and 4 families. (Ingo Molnar, Henrique de Moraes Holschuh,
>    Andy Lutomirski)
>  - Updated documentation to cover WT interfaces and usages.
>    (Andy Lutomirski, Yigal Korman)
> 
> ---
> Toshi Kani (7):
>   1/7 x86, mm, pat: Set WT to PA7 slot of PAT MSR
>   2/7 x86, mm, pat: Change reserve_memtype() to handle WT
>   3/7 x86, mm, asm-gen: Add ioremap_wt() for WT
>   4/7 x86, mm, pat: Add pgprot_writethrough() for WT
>   5/7 x86, mm, pat: Refactor !pat_enable handling
>   6/7 x86, mm, asm: Add WT support to set_page_memtype()
>   7/7 x86, mm: Add set_memory_wt() for WT
> 
> ---
>  Documentation/x86/pat.txt            |  13 ++-
>  arch/x86/include/asm/cacheflush.h    |   6 +-
>  arch/x86/include/asm/io.h            |   2 +
>  arch/x86/include/asm/pgtable_types.h |   3 +
>  arch/x86/mm/init.c                   |   6 +-
>  arch/x86/mm/iomap_32.c               |  12 +--
>  arch/x86/mm/ioremap.c                |  26 ++++-
>  arch/x86/mm/pageattr.c               |  61 ++++++++++--
>  arch/x86/mm/pat.c                    | 184 ++++++++++++++++++++++++-----------
>  include/asm-generic/io.h             |   9 ++
>  include/asm-generic/iomap.h          |   4 +
>  include/asm-generic/pgtable.h        |   4 +
>  12 files changed, 244 insertions(+), 86 deletions(-)
> 
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@xxxxxxxxx.  For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>


--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]