On Mon, Sep 15, 2014 at 8:33 PM, Minchan Kim <minchan@xxxxxxxxxx> wrote:
> On Mon, Sep 15, 2014 at 10:53:01AM -0400, Dan Streetman wrote:
>> On Sun, Sep 14, 2014 at 8:30 PM, Minchan Kim <minchan@xxxxxxxxxx> wrote:
>> > On Sat, Sep 13, 2014 at 03:01:47PM -0400, Dan Streetman wrote:
>> >> On Wed, Sep 3, 2014 at 9:39 PM, Minchan Kim <minchan@xxxxxxxxxx> wrote:
>> >> > VM uses nr_swap_pages as one of information when it does
>> >> > anonymous reclaim so that VM is able to throttle amount of swap.
>> >> >
>> >> > Normally, the nr_swap_pages is equal to freeable space of swap disk
>> >> > but for zram, it doesn't match because zram can limit memory usage
>> >> > by knob(ie, mem_limit) so although VM can see lots of free space
>> >> > from zram disk, zram can make fail intentionally once the allocated
>> >> > space is over to limit. If it happens, VM should notice it and
>> >> > stop reclaimaing until zram can obtain more free space but there
>> >> > is a good way to do at the moment.
>> >> >
>> >> > This patch adds new hint SWAP_GET_FREE which zram can return how
>> >> > many of freeable space it has. With using that, this patch adds
>> >> > __swap_full which returns true if the zram is full and substract
>> >> > remained freeable space of the zram-swap from nr_swap_pages.
>> >> > IOW, VM sees there is no more swap space of zram so that it stops
>> >> > anonymous reclaiming until swap_entry_free free a page and increase
>> >> > nr_swap_pages again.
>> >> >
>> >> > Signed-off-by: Minchan Kim <minchan@xxxxxxxxxx>
>> >> > ---
>> >> > include/linux/blkdev.h | 1 +
>> >> > mm/swapfile.c | 45 +++++++++++++++++++++++++++++++++++++++++++--
>> >> > 2 files changed, 44 insertions(+), 2 deletions(-)
>> >> >
>> >> > diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
>> >> > index 17437b2c18e4..c1199806e0f1 100644
>> >> > --- a/include/linux/blkdev.h
>> >> > +++ b/include/linux/blkdev.h
>> >> > @@ -1611,6 +1611,7 @@ static inline bool blk_integrity_is_initialized(struct gendisk *g)
>> >> >
>> >> > enum swap_blk_hint {
>> >> > SWAP_SLOT_FREE,
>> >> > + SWAP_GET_FREE,
>> >> > };
>> >> >
>> >> > struct block_device_operations {
>> >> > diff --git a/mm/swapfile.c b/mm/swapfile.c
>> >> > index 4bff521e649a..72737e6dd5e5 100644
>> >> > --- a/mm/swapfile.c
>> >> > +++ b/mm/swapfile.c
>> >> > @@ -484,6 +484,22 @@ new_cluster:
>> >> > *scan_base = tmp;
>> >> > }
>> >> >
>> >> > +static bool __swap_full(struct swap_info_struct *si)
>> >> > +{
>> >> > + if (si->flags & SWP_BLKDEV) {
>> >> > + long free;
>> >> > + struct gendisk *disk = si->bdev->bd_disk;
>> >> > +
>> >> > + if (disk->fops->swap_hint)
>> >> > + if (!disk->fops->swap_hint(si->bdev,
>> >> > + SWAP_GET_FREE,
>> >> > + &free))
>> >> > + return free <= 0;
>> >> > + }
>> >> > +
>> >> > + return si->inuse_pages == si->pages;
>> >> > +}
>> >> > +
>> >> > static unsigned long scan_swap_map(struct swap_info_struct *si,
>> >> > unsigned char usage)
>> >> > {
>> >> > @@ -583,11 +599,21 @@ checks:
>> >> > if (offset == si->highest_bit)
>> >> > si->highest_bit--;
>> >> > si->inuse_pages++;
>> >> > - if (si->inuse_pages == si->pages) {
>> >> > + if (__swap_full(si)) {
>> >>
>> >> This check is done after an available offset has already been
>> >> selected. So if the variable-size blkdev is full at this point, then
>> >> this is incorrect, as swap will try to store a page at the current
>> >> selected offset.
>> >
>> > So the result is just fail of a write then what happens?
>> > Page become redirty and keep it in memory so there is no harm.
>>
>> Happening once, it's not a big deal. But it's not as good as not
>> happening at all.
>
> With your suggestion, we should check full whevever we need new
> swap slot. To me, it's more concern than just a write fail.
well normal device fullness, i.e. inuse_pages == pages, is checked for
each new swap slot also. I don't see how you would get around
checking for each new swap slot.
>
>>
>> >
>> >>
>> >> > + struct gendisk *disk = si->bdev->bd_disk;
>> >> > +
>> >> > si->lowest_bit = si->max;
>> >> > si->highest_bit = 0;
>> >> > spin_lock(&swap_avail_lock);
>> >> > plist_del(&si->avail_list, &swap_avail_head);
>> >> > + /*
>> >> > + * If zram is full, it decreases nr_swap_pages
>> >> > + * for stopping anonymous page reclaim until
>> >> > + * zram has free space. Look at swap_entry_free
>> >> > + */
>> >> > + if (disk->fops->swap_hint)
>> >>
>> >> Simply checking for the existence of swap_hint isn't enough to know
>> >> we're using zram...
>> >
>> > Yes but acutally the hint have been used for only zram for several years.
>> > If other user is coming in future, we would add more checks if we really
>> > need it at that time.
>> > Do you have another idea?
>>
>> Well if this hint == zram just rename it zram. Especially if it's now
>> going to be explicitly used to mean it == zram. But I don't think
>> that is necessary.
>
> I'd like to clarify your comment. So, are you okay without any change?
no what i meant was i don't think the code at this location is
necessary...i think you can put a single blkdev swap_hint fullness
check at the start of scan_swap_map() and remove this.
>
>>
>> >
>> >>
>> >> > + atomic_long_sub(si->pages - si->inuse_pages,
>> >> > + &nr_swap_pages);
>> >> > spin_unlock(&swap_avail_lock);
>> >> > }
>> >> > si->swap_map[offset] = usage;
>> >> > @@ -796,6 +822,7 @@ static unsigned char swap_entry_free(struct swap_info_struct *p,
>> >> >
>> >> > /* free if no reference */
>> >> > if (!usage) {
>> >> > + struct gendisk *disk = p->bdev->bd_disk;
>> >> > dec_cluster_info_page(p, p->cluster_info, offset);
>> >> > if (offset < p->lowest_bit)
>> >> > p->lowest_bit = offset;
>> >> > @@ -808,6 +835,21 @@ static unsigned char swap_entry_free(struct swap_info_struct *p,
>> >> > if (plist_node_empty(&p->avail_list))
>> >> > plist_add(&p->avail_list,
>> >> > &swap_avail_head);
>> >> > + if ((p->flags & SWP_BLKDEV) &&
>> >> > + disk->fops->swap_hint) {
>> >>
>> >> freeing an entry from a full variable-size blkdev doesn't mean it's
>> >> not still full. In this case with zsmalloc, freeing one handle
>> >> doesn't actually free any memory unless it was the only handle left in
>> >> its containing zspage, and therefore it's possible that it is still
>> >> full at this point.
>> >
>> > No need to free a zspage in zsmalloc.
>> > If we free a page in zspage, it means we have free space in zspage
>> > so user can give a chance to user for writing out new page.
>>
>> That's not actually true, since zsmalloc has 255 different class
>> sizes, freeing one page means the next page to be compressed has a
>> 1/255 chance that it will be the same size as the just-freed page
>> (assuming random page compressability).
>
> I said "a chance" so if we have a possiblity, I'd like to try it.
> Pz, don't tie your thought into zsmalloc's internal. It's facility
> to communitcate with swap/zram, not zram allocator.
> IOW, We could change allocator of zram potentially
> (ex, historically, we have already done) and the (imaginary allocator/
> or enhanced zsmalloc) could have a technique to handle it.
I'm only thinking of what currently will happen. A lot of this
depends on exactly how zram's IS_FULL (or GET_FREE) is defined. If
it's a black/white boundary then this can certainly assume freeing one
entry should put the swap_info_struct back onto the avail_list, but if
it's a not-so-clear full/not-full boundary, then there almost
certainly will be write failures.
It seems like avoiding swap write failures is important, especially
when under heavy memory pressure, but maybe some testing would show
it's not really a big deal.
>
>>
>> >
>> >>
>> >> > + atomic_long_add(p->pages -
>> >> > + p->inuse_pages,
>> >> > + &nr_swap_pages);
>> >> > + /*
>> >> > + * reset [highest|lowest]_bit to avoid
>> >> > + * scan_swap_map infinite looping if
>> >> > + * cached free cluster's index by
>> >> > + * scan_swap_map_try_ssd_cluster is
>> >> > + * above p->highest_bit.
>> >> > + */
>> >> > + p->highest_bit = p->max - 1;
>> >> > + p->lowest_bit = 1;
>> >>
>> >> lowest_bit and highest_bit are likely to remain at those extremes for
>> >> a long time, until 1 or max-1 is freed and re-allocated.
>> >>
>> >>
>> >> By adding variable-size blkdev support to swap, I don't think
>> >> highest_bit can be re-used as a "full" flag anymore.
>> >>
>> >> Instead, I suggest that you add a "full" flag to struct
>> >> swap_info_struct. Then put a swap_hint GET_FREE check at the top of
>> >> scan_swap_map(), and if full simply turn "full" on, remove the
>> >> swap_info_struct from the avail list, reduce nr_swap_pages
>> >> appropriately, and return failure. Don't mess with lowest_bit or
>> >> highest_bit at all.
>> >
>> > Could you explain what logic in your suggestion prevent the problem
>> > I mentioned(ie, scan_swap_map infinite looping)?
>>
>> scan_swap_map would immediately exit since the GET_FREE (or IS_FULL)
>> check is done at its start. And it wouldn't be called again with that
>> swap_info_struct until non-full since it is removed from the
>> avail_list.
>
> Sorry for being not clear. I don't mean it.
> Please consider the situation where swap is not full any more
> by swap_entry_free. Newly scan_swap_map can select the slot index which
> is higher than p->highest_bit because we have cached free_cluster so
> scan_swap_map will reset it with p->lowest_bit and scan again and finally
> pick the slot index just freed by swap_entry_free and checks again.
> Then, it could be conflict by scan_swap_map_ssd_cluster_conflict so
> scan_swap_map_try_ssd_cluster will reset offset, scan_base to free_cluster_head
> but unfortunately, offset is higher than p->highest_bit so again it is reset
> to p->lowest_bit. It loops forever :(
sorry, i don't see what you're talking about...if you don't touch the
lowest_bit or highest_bit at all when marking zram as full, and also
don't touch them when marking zram as not-full, then there should
never be any problem with either.
The only reason that lowest_bit/highest_bit are reset when
inuse_pages==pages is because when that condition is true, there
really are no more offsets available. So highest_bit really is 0, and
lowest_bit really is max. Then, when a single offset is made
available in swap_entry_free, both lowest_bit and highest_bit are set
to it, because that really is both the lowest and highest bit.
In the case of a variable size blkdev, when it's full there actually
still are more offsets that can be used, so neither lowest nor highest
bit should be modified. Just leave them where they are, and when the
swap_info_struct is placed back onto the avail_list for scanning,
things will keep working correctly.
am i missing something?
>
> I'd like to solve this problem without many hooking in swap layer and
> any overhead for !zram case.
the only overhead for !zram is the (failing) check for swap_hint,
which you can't avoid.
>
>>
>> >
>> >>
>> >> Then in swap_entry_free(), do something like:
>> >>
>> >> dec_cluster_info_page(p, p->cluster_info, offset);
>> >> if (offset < p->lowest_bit)
>> >> p->lowest_bit = offset;
>> >> - if (offset > p->highest_bit) {
>> >> - bool was_full = !p->highest_bit;
>> >> + if (offset > p->highest_bit)
>> >> p->highest_bit = offset;
>> >> - if (was_full && (p->flags & SWP_WRITEOK)) {
>> >> + if (p->full && p->flags & SWP_WRITEOK) {
>> >> + bool is_var_size_blkdev = is_variable_size_blkdev(p);
>> >> + bool blkdev_full = is_variable_size_blkdev_full(p);
>> >> +
>> >> + if (!is_var_size_blkdev || !blkdev_full) {
>> >> + if (is_var_size_blkdev)
>> >> + atomic_long_add(p->pages - p->inuse_pages, &nr_swap_pages);
>> >> + p->full = false;
>> >> spin_lock(&swap_avail_lock);
>> >> WARN_ON(!plist_node_empty(&p->avail_list));
>> >> if (plist_node_empty(&p->avail_list))
>> >> plist_add(&p->avail_list,
>> >> &swap_avail_head);
>> >> spin_unlock(&swap_avail_lock);
>> >> + } else if (blkdev_full) {
>> >> + /* still full, so this page isn't actually
>> >> + * available yet to use; once non-full,
>> >> + * pages-inuse_pages will be the correct
>> >> + * number to add (above) since below will
>> >> + * inuse_pages--
>> >> + */
>> >> + atomic_long_dec(&nr_swap_pages);
>> >> }
>> >> }
>> >> atomic_long_inc(&nr_swap_pages);
>> >>
>> >>
>> >>
>> >> > @@ -815,7 +857,6 @@ static unsigned char swap_entry_free(struct swap_info_struct *p,
>> >> > p->inuse_pages--;
>> >> > frontswap_invalidate_page(p->type, offset);
>> >> > if (p->flags & SWP_BLKDEV) {
>> >> > - struct gendisk *disk = p->bdev->bd_disk;
>> >> > if (disk->fops->swap_hint)
>> >> > disk->fops->swap_hint(p->bdev,
>> >> > SWAP_SLOT_FREE,
>> >> > --
>> >> > 2.0.0
>> >> >
>> >>
>> >> --
>> >> To unsubscribe, send a message with 'unsubscribe linux-mm' in
>> >> the body to majordomo@xxxxxxxxx. For more info on Linux MM,
>> >> see: http://www.linux-mm.org/ .
>> >> Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>
>> >
>> > --
>> > Kind regards,
>> > Minchan Kim
>>
>> --
>> To unsubscribe, send a message with 'unsubscribe linux-mm' in
>> the body to majordomo@xxxxxxxxx. For more info on Linux MM,
>> see: http://www.linux-mm.org/ .
>> Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>
>
> --
> Kind regards,
> Minchan Kim
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>