On Tue, 10 Jun 2014, Steven Miao (Steven Miao) wrote: > From: Steven Miao <realmz6@xxxxxxxxx> > > mm could be removed from current task struct, using previous vma->vm_mm > > It will crash on blackfin after updated to Linux 3.15. The commit "mm: per-thread vma caching" caused the crash. > mm could be removed from current task struct before > mmput()-> > exit_mmap()-> > delete_vma_from_mm() > > the detailed booting log: > > ## Booting kernel from Legacy Image at 01000000 ... > Image Name: bf609-0.0-3.15.0-ADI-2014R1-pre- > Image Type: Blackfin Linux Kernel Image (gzip compressed) > Data Size: 10293222 Bytes = 9.8 MiB > Load Address: 00001000 > Entry Point: 002e796c > Verifying Checksum ... OK > Uncompressing Kernel Image ... OK > Starting Kernel at = 002e796c > Linux version 3.15.0-ADI-2014R1-pre-00345-gea9f446 (steven@steven-OptiPlex-390) (gcc version 4.3.5 (ADI-trunk/svn-5962) ) #25 Tue Jun 10 17:47:46 CST 2014 > register early platform devices > bootconsole [early_shadow0] enabled > ERROR: Not running on ADSP-BF609: unknown CPUID 0x0000 Rev 0.0 > bootconsole [early_BFuart0] enabled > early printk enabled on early_BFuart0 > Board Memory: 128MB > Kernel Managed Memory: 128MB > Memory map: > fixedcode = 0x00000400-0x00000490 > text = 0x00001000-0x001fa910 > rodata = 0x001fa934-0x002a1ea8 > bss = 0x002a2000-0x002b9bc0 > data = 0x002b9bc0-0x002e4000 > stack = 0x002e2000-0x002e4000 > init = 0x002e4000-0x00b45000 > available = 0x00b45000-0x07f00000 > DMA Zone = 0x07f00000-0x08000000 > Hardware Trace active and enabled > Blackfin support (C) 2004-2010 Analog Devices, Inc. > Compiled for ADSP-BF609 Rev 0.0 > Blackfin Linux support by http://blackfin.uclinux.org/ > Processor Speed: 500 MHz core clock, 125 MHz SCLk, 125 MHz SCLK0, 125 MHz SCLK1 and 250 MHz DCLK > NOMPU: setting up cplb tables > Instruction Cache Enabled for CPU0 > External memory: cacheable in instruction cache > L2 SRAM : uncacheable in instruction cache > Data Cache Enabled for CPU0 > External memory: cacheable (write-back) in data cache > L2 SRAM : uncacheable in data cache > Built 1 zonelists in Zone order, mobility grouping off. Total pages: 32258 > Kernel command line: root=/dev/mtdblock0 rw clkin_hz=(25000000) earlyprintk=serial,uart0,57600 console=ttyBF0,57600 ip=10.99.24.159:10.99.24.86:10.99.24.1:255.255.255.0:"bf609-ezkit":eth0:off > PID hash table entries: 512 (order: -1, 2048 bytes) > Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) > Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) > Memory: 117340K/130048K available (2022K kernel code, 169K rwdata, 669K rodata, 8580K init, 94K bss, 12708K reserved, 1024K DMA) > NR_IRQS:291 > Configuring Blackfin Priority Driven Interrupts > Console: colour dummy device 80x25 > Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) > pid_max: default: 32768 minimum: 301 > Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) > Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) > devtmpfs: initialized > Blackfin Scratchpad data SRAM: 4 KB > Blackfin L1 Data A SRAM: 16 KB (9 KB free) > Blackfin L1 Data B SRAM: 16 KB (16 KB free) > Blackfin L1 Instruction SRAM: 64 KB (49 KB free) > Blackfin L2 SRAM: 256 KB (256 KB free) > pinctrl core: initialized pinctrl subsystem > NET: Registered protocol family 16 > Blackfin DMA Controller > ezkit_init(): registering device resources > SCSI subsystem initialized > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > i2c-bfin-twi i2c-bfin-twi.0: Blackfin on-chip I2C TWI Contoller, regs_base@ffc01e00 > i2c-bfin-twi i2c-bfin-twi.1: Blackfin on-chip I2C TWI Contoller, regs_base@ffc01f00 > pps_core: LinuxPPS API ver. 1 registered > pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> > PTP clock support registered > NET: Registered protocol family 23 > Switched to clocksource bfin_cs_cycles > NET: Registered protocol family 2 > TCP established hash table entries: 1024 (order: 0, 4096 bytes) > TCP bind hash table entries: 1024 (order: 0, 4096 bytes) > TCP: Hash tables configured (established 1024 bind 1024) > TCP: reno registered > UDP hash table entries: 256 (order: 0, 4096 bytes) > UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) > NET: Registered protocol family 1 > msgmni has been set to 229 > io scheduler noop registered (default) > bfin-uart: Blackfin serial driver > bfin-uart.0: ttyBF0 at MMIO 0xffc02000 (irq = 88, base_baud = 7812500) is a BFIN-UART > console [ttyBF0] enabled > console [ttyBF0] enabled > bootconsole [early_BFuart0] disabled > bootconsole [early_BFuart0] disabled > bootconsole [early_shadow0] disabled > CAN device driver interface > bfin_can bfin_can.0: bfin_can device registered(®_base=ffc00a00, rx_irq=47, tx_irq=48, err_irq=49, sclk=125000000) > stmmaceth stmmaceth.0: no reset control found > stmmac - user ID: 0x10, Synopsys ID: 0x36 > Ring mode enabled > DMA HW capability register supported > Enhanced/Alternate descriptors > Enabled extended descriptors > RX Checksum Offload Engine supported (type 2) > Wake-Up On Lan supported > Enable RX Mitigation via HW Watchdog Timer > NULL pointer access > Kernel OOPS in progress > Deferred Exception context > CURRENT PROCESS: > COMM=modprobe PID=278 CPU=0 > invalid mm > return address: [0x000531de]; contents of: > 0x000531b0: c727 acea 0c42 181d 0000 0000 0000 a0a8 > 0x000531c0: b090 acaa 0c42 1806 0000 0000 0000 a0e8 > 0x000531d0: b0d0 e801 0000 05b3 0010 e522 0046 [a090] > 0x000531e0: 6408 b090 0c00 17cc 3042 e3ff f37b 2fc8 > > CPU: 0 PID: 278 Comm: modprobe Not tainted 3.15.0-ADI-2014R1-pre-00345-gea9f446 #25 > task: 0572b720 ti: 0569e000 task.ti: 0569e000 > Compiled for cpu family 0x27fe (Rev 0), but running on:0x0000 (Rev 0) > ADSP-BF609-0.0 500(MHz CCLK) 125(MHz SCLK) (mpu off) > Linux version 3.15.0-ADI-2014R1-pre-00345-gea9f446 (steven@steven-OptiPlex-390) (gcc version 4.3.5 (ADI-trunk/svn-5962) ) #25 Tue Jun 10 17:47:46 CST 2014 > > SEQUENCER STATUS: Not tainted > SEQSTAT: 00000027 IPEND: 8008 IMASK: ffff SYSCFG: 2806 > EXCAUSE : 0x27 > physical IVG3 asserted : <0xffa00744> { _trap + 0x0 } > physical IVG15 asserted : <0xffa00d68> { _evt_system_call + 0x0 } > logical irq 6 mapped : <0xffa003bc> { _bfin_coretmr_interrupt + 0x0 } > logical irq 7 mapped : <0x00008828> { _bfin_fault_routine + 0x0 } > logical irq 11 mapped : <0x00007724> { _l2_ecc_err + 0x0 } > logical irq 13 mapped : <0x00008828> { _bfin_fault_routine + 0x0 } > logical irq 39 mapped : <0x00150788> { _bfin_twi_interrupt_entry + 0x0 } > logical irq 40 mapped : <0x00150788> { _bfin_twi_interrupt_entry + 0x0 } > RETE: <0x00000000> /* Maybe null pointer? */ > RETN: <0x0569fe50> /* kernel dynamic memory (maybe user-space) */ > RETX: <0x00000480> /* Maybe fixed code section */ > RETS: <0x00053384> { _exit_mmap + 0x28 } > PC : <0x000531de> { _delete_vma_from_mm + 0x92 } > DCPLB_FAULT_ADDR: <0x00000008> /* Maybe null pointer? */ > ICPLB_FAULT_ADDR: <0x000531de> { _delete_vma_from_mm + 0x92 } > PROCESSOR STATE: > R0 : 00000004 R1 : 0569e000 R2 : 00bf3db4 R3 : 00000000 > R4 : 057f9800 R5 : 00000001 R6 : 0569ddd0 R7 : 0572b720 > P0 : 0572b854 P1 : 00000004 P2 : 00000000 P3 : 0569dda0 > P4 : 0572b720 P5 : 0566c368 FP : 0569fe5c SP : 0569fd74 > LB0: 057f523f LT0: 057f523e LC0: 00000000 > LB1: 0005317c LT1: 00053172 LC1: 00000002 > B0 : 00000000 L0 : 00000000 M0 : 0566f5bc I0 : 00000000 > B1 : 00000000 L1 : 00000000 M1 : 00000000 I1 : ffffffff > B2 : 00000001 L2 : 00000000 M2 : 00000000 I2 : 00000000 > B3 : 00000000 L3 : 00000000 M3 : 00000000 I3 : 057f8000 > A0.w: 00000000 A0.x: 00000000 A1.w: 00000000 A1.x: 00000000 > USP : 056ffcf8 ASTAT: 02003024 > > Hardware Trace: > 0 Target : <0x00003fb8> { _trap_c + 0x0 } > Source : <0xffa006d8> { _exception_to_level5 + 0xa0 } JUMP.L > 1 Target : <0xffa00638> { _exception_to_level5 + 0x0 } > Source : <0xffa004f2> { _bfin_return_from_exception + 0x6 } RTX > 2 Target : <0xffa004ec> { _bfin_return_from_exception + 0x0 } > Source : <0xffa00590> { _ex_trap_c + 0x70 } JUMP.S > 3 Target : <0xffa00520> { _ex_trap_c + 0x0 } > Source : <0xffa0076e> { _trap + 0x2a } JUMP (P4) > 4 Target : <0xffa00744> { _trap + 0x0 } > FAULT : <0x000531de> { _delete_vma_from_mm + 0x92 } P0 = W[P2 + 2] > Source : <0x000531da> { _delete_vma_from_mm + 0x8e } P2 = [P4 + 0x18] > 5 Target : <0x000531da> { _delete_vma_from_mm + 0x8e } > Source : <0x00053176> { _delete_vma_from_mm + 0x2a } IF CC JUMP pcrel > 6 Target : <0x0005314c> { _delete_vma_from_mm + 0x0 } > Source : <0x00053380> { _exit_mmap + 0x24 } JUMP.L > 7 Target : <0x00053378> { _exit_mmap + 0x1c } > Source : <0x00053394> { _exit_mmap + 0x38 } IF !CC JUMP pcrel (BP) > 8 Target : <0x00053390> { _exit_mmap + 0x34 } > Source : <0xffa020e0> { __cond_resched + 0x20 } RTS > 9 Target : <0xffa020c0> { __cond_resched + 0x0 } > Source : <0x0005338c> { _exit_mmap + 0x30 } JUMP.L > 10 Target : <0x0005338c> { _exit_mmap + 0x30 } > Source : <0x0005333a> { _delete_vma + 0xb2 } RTS > 11 Target : <0x00053334> { _delete_vma + 0xac } > Source : <0x0005507a> { _kmem_cache_free + 0xba } RTS > 12 Target : <0x00055068> { _kmem_cache_free + 0xa8 } > Source : <0x0005505e> { _kmem_cache_free + 0x9e } IF !CC JUMP pcrel (BP) > 13 Target : <0x00055052> { _kmem_cache_free + 0x92 } > Source : <0x0005501a> { _kmem_cache_free + 0x5a } IF CC JUMP pcrel > 14 Target : <0x00054ff4> { _kmem_cache_free + 0x34 } > Source : <0x00054fce> { _kmem_cache_free + 0xe } IF CC JUMP pcrel (BP) > 15 Target : <0x00054fc0> { _kmem_cache_free + 0x0 } > Source : <0x00053330> { _delete_vma + 0xa8 } JUMP.L > Kernel Stack > Stack info: > SP: [0x0569ff24] <0x0569ff24> /* kernel dynamic memory (maybe user-space) */ > Memory from 0x0569ff20 to 056a0000 > 0569ff20: 00000001 [04e8da5a] 00008000 00000000 00000000 056a0000 04e8da5a 04e8da5a > 0569ff40: 04eb9eea ffa00dce 02003025 04ea09c5 057f523f 04ea09c4 057f523e 00000000 > 0569ff60: 00000000 00000000 00000000 00000000 00000000 00000000 00000001 00000000 > 0569ff80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 > 0569ffa0: 0566f5bc 057f8000 057f8000 00000001 04ec0170 056ffcf8 056ffd04 057f9800 > 0569ffc0: 04d1d498 057f9800 057f8fe4 057f8ef0 00000001 057f928c 00000001 00000001 > 0569ffe0: 057f9800 00000000 00000008 00000007 00000001 00000001 00000001 <00002806> > Return addresses in stack: > address : <0x00002806> { _show_cpuinfo + 0x2d2 } > Modules linked in: > Kernel panic - not syncing: Kernel exception > ---[ end Kernel panic - not syncing: Kernel exception > > > Signed-off-by: Steven Miao <realmz6@xxxxxxxxx> Acked-by: David Rientjes <rientjes@xxxxxxxxxx> Not sure if there's going to be a 3.15 stable kernel or not, but if so, this should be marked Cc: stable@xxxxxxxxxxxxxxx # 3.15 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@xxxxxxxxx. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>