Hello Greg,
thanks for your reply.
On Tue, Jun 03, 2014 at 10:14:55PM +1000, Greg Ungerer wrote:
> >>I think it would be OK to define TASK_SIZE to 0xffffffff for !MMU.
> >>blackfin, frv and m68k also do this. c6x does define it to 0xFFFFF000 to
> >>leave space for error codes.
>
> I did that same change for m68k in commit cc24c40 ("m68knommu: remove
> size limit on non-MMU TASK_SIZE"). For similar reasons as you need to
> now.
ok.
> >>Thoughts?
> >The problem is that current linus/master (and also next) doesn't boot on
> >my ARM-nommu machine because the user string functions (strnlen_user,
> >strncpy_from_user et al.) refuse to work on strings above TASK_SIZE
> >which in my case also includes the XIP kernel image.
>
> I seem to recall that we were not considering flash or anything else
> other than RAM when defining that original TASK_SIZE (back many, many
> years ago). Some of the address checks you list above made some sense
> if you had everything in RAM (though only upper bounds are checked).
> The thinking was some checking is better than none I suppose.
What is the actual meaning of TASK_SIZE? The maximal value of a valid
userspace address?
> Setting a hard coded memory size in CONFIG_DRAM_SIZE is not all that
> fantastic either...
Not sure what you mean? Having CONFIG_DRAM_SIZE at all or use it for
boundary checking?
CONFIG_DRAM_SIZE is hardly used apart from defining TASK_SIZE:
- #define END_MEM (UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
which is only used to define MODULES_END. Ap
- Some memory configuration using cp15 registers in
arch/arm/mm/proc-arm{740,940,946}.S
For the former I'd say better use 0xffffffff, too. For the latter I
wonder if we should just drop CPU_ARM740T, CPU_ARM940T and CPU_ARM946E.
These are only selectable if ARCH_INTEGRATOR and are not selected by
other symbols. As ARCH_INTEGRATOR selects ARM_PATCH_PHYS_VIRT since
commit fe9891454473 (ARM: integrator: Default enable
ARM_PATCH_PHYS_VIRT, AUTO_ZRELADDR) for Linux 3.13 and
ARM_PATCH_PHYS_VIRT depends on MMU the Integrator-noMMU targets are
broken anyhow.
I will prepare a patch series with some cleanups.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>