Hi,
On Mon, 31 Mar 2014 11:02:20 -0400 Naoya Horiguchi wrote:
> On Mon, Mar 31, 2014 at 07:43:32PM +0900, Mizuma, Masayoshi wrote:
>> Hi,
>>
>> When I decrease the value of nr_hugepage in procfs a lot, softlockup happens.
>> It is because there is no chance of context switch during this process.
>>
>> On the other hand, when I allocate a large number of hugepages,
>> there is some chance of context switch. Hence softlockup doesn't happen
>> during this process. So it's necessary to add the context switch
>> in the freeing process as same as allocating process to avoid softlockup.
>>
>> When I freed 12 TB hugapages with kernel-2.6.32-358.el6, the freeing process
>> occupied a CPU over 150 seconds and following softlockup message appeared
>> twice or more.
>>
>> --
>> $ echo 6000000 > /proc/sys/vm/nr_hugepages
>> $ cat /proc/sys/vm/nr_hugepages
>> 6000000
>> $ grep ^Huge /proc/meminfo
>> HugePages_Total: 6000000
>> HugePages_Free: 6000000
>> HugePages_Rsvd: 0
>> HugePages_Surp: 0
>> Hugepagesize: 2048 kB
>> $ echo 0 > /proc/sys/vm/nr_hugepages
>>
>> BUG: soft lockup - CPU#16 stuck for 67s! [sh:12883] ...
>> Pid: 12883, comm: sh Not tainted 2.6.32-358.el6.x86_64 #1
>> Call Trace:
>> [<ffffffff8115a438>] ? free_pool_huge_page+0xb8/0xd0
>> [<ffffffff8115a578>] ? set_max_huge_pages+0x128/0x190
>> [<ffffffff8115c663>] ? hugetlb_sysctl_handler_common+0x113/0x140
>> [<ffffffff8115c6de>] ? hugetlb_sysctl_handler+0x1e/0x20
>> [<ffffffff811f3097>] ? proc_sys_call_handler+0x97/0xd0
>> [<ffffffff811f30e4>] ? proc_sys_write+0x14/0x20
>> [<ffffffff81180f98>] ? vfs_write+0xb8/0x1a0
>> [<ffffffff81181891>] ? sys_write+0x51/0x90
>> [<ffffffff810dc565>] ? __audit_syscall_exit+0x265/0x290
>> [<ffffffff8100b072>] ? system_call_fastpath+0x16/0x1b
>> --
>> I have not confirmed this problem with upstream kernels because I am not
>> able to prepare the machine equipped with 12TB memory now.
>> However I confirmed that the amount of decreasing hugepages was directly
>> proportional to the amount of required time.
>>
>> I measured required times on a smaller machine. It showed 130-145 hugepages
>> decreased in a millisecond.
>>
>> Amount of decreasing Required time Decreasing rate
>> hugepages (msec) (pages/msec)
>> ------------------------------------------------------------
>> 10,000 pages == 20GB 70 - 74 135-142
>> 30,000 pages == 60GB 208 - 229 131-144
>>
>> It means decrement of 6TB hugepages will trigger softlockup with the default
>> threshold 20sec, in this decreasing rate.
>>
>> Signed-off-by: Masayoshi Mizuma <m.mizuma@xxxxxxxxxxxxxx>
>> Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
>> Cc: Joonsoo Kim <iamjoonsoo.kim@xxxxxxx>
>> Cc: Michal Hocko <mhocko@xxxxxxx>
>> Cc: Wanpeng Li <liwanp@xxxxxxxxxxxxxxxxxx>
>> Cc: Aneesh Kumar <aneesh.kumar@xxxxxxxxxxxxxxxxxx>
>> Cc: KOSAKI Motohiro <kosaki.motohiro@xxxxxxxxxxxxxx>
>> ---
>> mm/hugetlb.c | 1 +
>> 1 files changed, 1 insertions(+), 0 deletions(-)
>>
>> diff --git a/mm/hugetlb.c b/mm/hugetlb.c
>> index 7d57af2..fe67f2c 100644
>> --- a/mm/hugetlb.c
>> +++ b/mm/hugetlb.c
>> @@ -1535,6 +1535,7 @@ static unsigned long set_max_huge_pages(struct hstate *h, unsigned long count,
>> while (min_count < persistent_huge_pages(h)) {
>> if (!free_pool_huge_page(h, nodes_allowed, 0))
>> break;
>> + cond_resched_lock(&hugetlb_lock);
>> }
>> while (count < persistent_huge_pages(h)) {
>> if (!adjust_pool_surplus(h, nodes_allowed, 1))
>
> It seems that the same thing could happen when freeing a number of surplus pages,
> so how about adding cond_resched_lock() also in return_unused_surplus_pages()?
Thank you for pointing that out!
I will also add cond_resched_lock() in the following loop at return_unused_surplus_pages().
static void return_unused_surplus_pages(struct hstate *h,
unsigned long unused_resv_pages)
{
<cut>
while (nr_pages--) {
if (!free_pool_huge_page(h, &node_states[N_MEMORY], 1))
break;
}
}
Thanks,
Masayoshi Mizuma
>
> Thanks,
> Naoya Horiguchi
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>