Oops, [1-3] patch sent by mistake.
Just I wanted to send a few people for internal discussion before
LSF/MM slot.
Sorry.
On Mon, Mar 24, 2014 at 08:35:02PM +0900, Minchan Kim wrote:
> From: John Stultz <john.stultz@xxxxxxxxxx>
>
> This patch introduces the vrange() syscall, which allows for specifying
> ranges of memory as volatile, and able to be discarded by the system.
>
> This initial patch simply adds the syscall, and the vma handling,
> splitting and merging the vmas as needed, and marking them with
> VM_VOLATILE.
>
> No purging or discarding of volatile ranges is done at this point.
>
> Example man page:
>
> NAME
> vrange - Mark or unmark range of memory as volatile
>
> SYNOPSIS
> ssize_t vrange(unsigned_long start, size_t length,
> unsigned_long mode, unsigned_long flags,
> int *purged);
>
> DESCRIPTION
> Applications can use vrange(2) to advise kernel that pages of
> anonymous mapping in the given VM area can be reclaimed without
> swapping (or can no longer be reclaimed without swapping).
> The idea is that application can help kernel with page reclaim
> under memory pressure by specifying data it can easily regenerate
> and thus kernel can discard the data if needed.
>
> mode:
> VRANGE_VOLATILE
> Informs the kernel that the VM can discard in pages in
> the specified range when under memory pressure.
> VRANGE_NONVOLATILE
> Informs the kernel that the VM can no longer discard pages
> in this range.
>
> flags: Currently no flags are supported.
>
> purged: Pointer to an integer which will return 1 if
> mode == VRANGE_NONVOLATILE and any page in the affected range
> was purged. If purged returns zero during a mode ==
> VRANGE_NONVOLATILE call, it means all of the pages in the range
> are intact.
>
> If a process accesses volatile memory which has been purged, and
> was not set as non volatile via a VRANGE_NONVOLATILE call, it
> will recieve a SIGBUS.
>
> RETURN VALUE
> On success vrange returns the number of bytes marked or unmarked.
> Similar to write(), it may return fewer bytes then specified
> if it ran into a problem.
>
> When using VRANGE_NON_VOLATILE, if the return value is smaller
> then the specified length, then the value specified by the purged
> pointer will be set to 1 if any of the pages specified in the
> return value as successfully marked non-volatile had been purged.
>
> If an error is returned, no changes were made.
>
> ERRORS
> EINVAL This error can occur for the following reasons:
> * The value length is negative or not page size units.
> * addr is not page-aligned
> * mode not a valid value.
> * flags is not a valid value.
>
> ENOMEM Not enough memory
>
> ENOMEM Addresses in the specified range are not currently mapped,
> or are outside the address space of the process.
>
> EFAULT Purged pointer is invalid
>
> This a simplified implementation which reuses some of the logic
> from Minchan's earlier efforts. So credit to Minchan for his work.
>
> Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
> Cc: Android Kernel Team <kernel-team@xxxxxxxxxxx>
> Cc: Johannes Weiner <hannes@xxxxxxxxxxx>
> Cc: Robert Love <rlove@xxxxxxxxxx>
> Cc: Mel Gorman <mel@xxxxxxxxx>
> Cc: Hugh Dickins <hughd@xxxxxxxxxx>
> Cc: Dave Hansen <dave@xxxxxxxx>
> Cc: Rik van Riel <riel@xxxxxxxxxx>
> Cc: Dmitry Adamushko <dmitry.adamushko@xxxxxxxxx>
> Cc: Neil Brown <neilb@xxxxxxx>
> Cc: Andrea Arcangeli <aarcange@xxxxxxxxxx>
> Cc: Mike Hommey <mh@xxxxxxxxxxxx>
> Cc: Taras Glek <tglek@xxxxxxxxxxx>
> Cc: Jan Kara <jack@xxxxxxx>
> Cc: KOSAKI Motohiro <kosaki.motohiro@xxxxxxxxx>
> Cc: Michel Lespinasse <walken@xxxxxxxxxx>
> Cc: Minchan Kim <minchan@xxxxxxxxxx>
> Cc: linux-mm@xxxxxxxxx <linux-mm@xxxxxxxxx>
> Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
> ---
> arch/x86/syscalls/syscall_64.tbl | 1 +
> include/linux/mm.h | 1 +
> include/linux/vrange.h | 8 ++
> mm/Makefile | 2 +-
> mm/vrange.c | 173 +++++++++++++++++++++++++++++++++++++++
> 5 files changed, 184 insertions(+), 1 deletion(-)
> create mode 100644 include/linux/vrange.h
> create mode 100644 mm/vrange.c
>
> diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/syscalls/syscall_64.tbl
> index a12bddc..7ae3940 100644
> --- a/arch/x86/syscalls/syscall_64.tbl
> +++ b/arch/x86/syscalls/syscall_64.tbl
> @@ -322,6 +322,7 @@
> 313 common finit_module sys_finit_module
> 314 common sched_setattr sys_sched_setattr
> 315 common sched_getattr sys_sched_getattr
> +316 common vrange sys_vrange
>
> #
> # x32-specific system call numbers start at 512 to avoid cache impact
> diff --git a/include/linux/mm.h b/include/linux/mm.h
> index c1b7414..a1f11da 100644
> --- a/include/linux/mm.h
> +++ b/include/linux/mm.h
> @@ -117,6 +117,7 @@ extern unsigned int kobjsize(const void *objp);
> #define VM_IO 0x00004000 /* Memory mapped I/O or similar */
>
> /* Used by sys_madvise() */
> +#define VM_VOLATILE 0x00001000 /* VMA is volatile */
> #define VM_SEQ_READ 0x00008000 /* App will access data sequentially */
> #define VM_RAND_READ 0x00010000 /* App will not benefit from clustered reads */
>
> diff --git a/include/linux/vrange.h b/include/linux/vrange.h
> new file mode 100644
> index 0000000..6e5331e
> --- /dev/null
> +++ b/include/linux/vrange.h
> @@ -0,0 +1,8 @@
> +#ifndef _LINUX_VRANGE_H
> +#define _LINUX_VRANGE_H
> +
> +#define VRANGE_NONVOLATILE 0
> +#define VRANGE_VOLATILE 1
> +#define VRANGE_VALID_FLAGS (0) /* Don't yet support any flags */
> +
> +#endif /* _LINUX_VRANGE_H */
> diff --git a/mm/Makefile b/mm/Makefile
> index 310c90a..20229e2 100644
> --- a/mm/Makefile
> +++ b/mm/Makefile
> @@ -16,7 +16,7 @@ obj-y := filemap.o mempool.o oom_kill.o fadvise.o \
> readahead.o swap.o truncate.o vmscan.o shmem.o \
> util.o mmzone.o vmstat.o backing-dev.o \
> mm_init.o mmu_context.o percpu.o slab_common.o \
> - compaction.o balloon_compaction.o \
> + compaction.o balloon_compaction.o vrange.o \
> interval_tree.o list_lru.o $(mmu-y)
>
> obj-y += init-mm.o
> diff --git a/mm/vrange.c b/mm/vrange.c
> new file mode 100644
> index 0000000..2f8e2ce
> --- /dev/null
> +++ b/mm/vrange.c
> @@ -0,0 +1,173 @@
> +#include <linux/syscalls.h>
> +#include <linux/vrange.h>
> +#include <linux/mm_inline.h>
> +#include <linux/pagemap.h>
> +#include <linux/rmap.h>
> +#include <linux/hugetlb.h>
> +#include <linux/mmu_notifier.h>
> +#include <linux/mm_inline.h>
> +#include "internal.h"
> +
> +
> +/**
> + * do_vrange - Marks or clears VMAs in the range (start-end) as VM_VOLATILE
> + *
> + * Core logic of sys_volatile. Iterates over the VMAs in the specified
> + * range, and marks or clears them as VM_VOLATILE, splitting or merging them
> + * as needed.
> + *
> + * Returns the number of bytes successfully modified.
> + *
> + * Returns error only if no bytes were modified.
> + */
> +static ssize_t do_vrange(struct mm_struct *mm, unsigned long start,
> + unsigned long end, unsigned long mode,
> + unsigned long flags, int *purged)
> +{
> + struct vm_area_struct *vma, *prev;
> + unsigned long orig_start = start;
> + ssize_t count = 0, ret = 0;
> +
> + down_read(&mm->mmap_sem);
> +
> + vma = find_vma_prev(mm, start, &prev);
> + if (vma && start > vma->vm_start)
> + prev = vma;
> +
> + for (;;) {
> + unsigned long new_flags;
> + pgoff_t pgoff;
> + unsigned long tmp;
> +
> + if (!vma)
> + goto out;
> +
> + if (vma->vm_flags & (VM_SPECIAL|VM_LOCKED|VM_MIXEDMAP|
> + VM_HUGETLB))
> + goto out;
> +
> + /* We don't support volatility on files for now */
> + if (vma->vm_file) {
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + /* return ENOMEM if we're trying to mark unmapped pages */
> + if (start < vma->vm_start) {
> + ret = -ENOMEM;
> + goto out;
> + }
> +
> + new_flags = vma->vm_flags;
> +
> + tmp = vma->vm_end;
> + if (end < tmp)
> + tmp = end;
> +
> + switch (mode) {
> + case VRANGE_VOLATILE:
> + new_flags |= VM_VOLATILE;
> + break;
> + case VRANGE_NONVOLATILE:
> + new_flags &= ~VM_VOLATILE;
> + }
> +
> + pgoff = vma->vm_pgoff + ((start - vma->vm_start) >> PAGE_SHIFT);
> + prev = vma_merge(mm, prev, start, tmp, new_flags,
> + vma->anon_vma, vma->vm_file, pgoff,
> + vma_policy(vma));
> + if (prev)
> + goto success;
> +
> + if (start != vma->vm_start) {
> + ret = split_vma(mm, vma, start, 1);
> + if (ret)
> + goto out;
> + }
> +
> + if (tmp != vma->vm_end) {
> + ret = split_vma(mm, vma, tmp, 0);
> + if (ret)
> + goto out;
> + }
> +
> + prev = vma;
> +success:
> + vma->vm_flags = new_flags;
> +
> + /* update count to distance covered so far*/
> + count = tmp - orig_start;
> +
> + start = tmp;
> + if (start < prev->vm_end)
> + start = prev->vm_end;
> + if (start >= end)
> + goto out;
> + vma = prev->vm_next;
> + }
> +out:
> + up_read(&mm->mmap_sem);
> +
> + /* report bytes successfully marked, even if we're exiting on error */
> + if (count)
> + return count;
> +
> + return ret;
> +}
> +
> +
> +/**
> + * sys_vrange - Marks specified range as volatile or non-volatile.
> + *
> + * Validates the syscall inputs and calls do_vrange(), then copies the
> + * purged flag back out to userspace.
> + *
> + * Returns the number of bytes successfully modified.
> + * Returns error only if no bytes were modified.
> + */
> +SYSCALL_DEFINE5(vrange, unsigned long, start, size_t, len, unsigned long, mode,
> + unsigned long, flags, int __user *, purged)
> +{
> + unsigned long end;
> + struct mm_struct *mm = current->mm;
> + ssize_t ret = -EINVAL;
> + int p = 0;
> +
> + if (flags & ~VRANGE_VALID_FLAGS)
> + goto out;
> +
> + if (start & ~PAGE_MASK)
> + goto out;
> +
> + len &= PAGE_MASK;
> + if (!len)
> + goto out;
> +
> + end = start + len;
> + if (end < start)
> + goto out;
> +
> + if (start >= TASK_SIZE)
> + goto out;
> +
> + if (purged) {
> + /* Test pointer is valid before making any changes */
> + if (put_user(p, purged))
> + return -EFAULT;
> + }
> +
> + ret = do_vrange(mm, start, end, mode, flags, &p);
> +
> + if (purged) {
> + if (put_user(p, purged)) {
> + /*
> + * This would be bad, since we've modified volatilty
> + * and the change in purged state would be lost.
> + */
> + WARN_ONCE(1, "vrange: purge state possibly lost\n");
> + }
> + }
> +
> +out:
> + return ret;
> +}
> --
> 1.8.4.3
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>