Use unified pte_bitop helper to manipulate bits in pte/pgoff bitfield,
and convert pte_to_pgoff/pgoff_to_pte to inlines.
Signed-off-by: Cyrill Gorcunov <gorcunov@xxxxxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Cc: Pavel Emelyanov <xemul@xxxxxxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxx>
Cc: "H. Peter Anvin" <hpa@xxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
---
arch/x86/include/asm/pgtable-2level.h | 100 ++++++++++++++++++++--------------
1 file changed, 59 insertions(+), 41 deletions(-)
Index: linux-2.6.git/arch/x86/include/asm/pgtable-2level.h
===================================================================
--- linux-2.6.git.orig/arch/x86/include/asm/pgtable-2level.h
+++ linux-2.6.git/arch/x86/include/asm/pgtable-2level.h
@@ -55,6 +55,13 @@ static inline pmd_t native_pmdp_get_and_
#define native_pmdp_get_and_clear(xp) native_local_pmdp_get_and_clear(xp)
#endif
+/* Bit manipulation helper on pte/pgoff entry */
+static inline unsigned long pte_bitop(unsigned long value, unsigned int rightshift,
+ unsigned long mask, unsigned int leftshift)
+{
+ return ((value >> rightshift) & mask) << leftshift;
+}
+
#ifdef CONFIG_MEM_SOFT_DIRTY
/*
@@ -71,31 +78,34 @@ static inline pmd_t native_pmdp_get_and_
#define PTE_FILE_BITS2 (PTE_FILE_SHIFT3 - PTE_FILE_SHIFT2 - 1)
#define PTE_FILE_BITS3 (PTE_FILE_SHIFT4 - PTE_FILE_SHIFT3 - 1)
-#define pte_to_pgoff(pte) \
- ((((pte).pte_low >> (PTE_FILE_SHIFT1)) \
- & ((1U << PTE_FILE_BITS1) - 1))) \
- + ((((pte).pte_low >> (PTE_FILE_SHIFT2)) \
- & ((1U << PTE_FILE_BITS2) - 1)) \
- << (PTE_FILE_BITS1)) \
- + ((((pte).pte_low >> (PTE_FILE_SHIFT3)) \
- & ((1U << PTE_FILE_BITS3) - 1)) \
- << (PTE_FILE_BITS1 + PTE_FILE_BITS2)) \
- + ((((pte).pte_low >> (PTE_FILE_SHIFT4))) \
- << (PTE_FILE_BITS1 + PTE_FILE_BITS2 + PTE_FILE_BITS3))
-
-#define pgoff_to_pte(off) \
- ((pte_t) { .pte_low = \
- ((((off)) & ((1U << PTE_FILE_BITS1) - 1)) << PTE_FILE_SHIFT1) \
- + ((((off) >> PTE_FILE_BITS1) \
- & ((1U << PTE_FILE_BITS2) - 1)) \
- << PTE_FILE_SHIFT2) \
- + ((((off) >> (PTE_FILE_BITS1 + PTE_FILE_BITS2)) \
- & ((1U << PTE_FILE_BITS3) - 1)) \
- << PTE_FILE_SHIFT3) \
- + ((((off) >> \
- (PTE_FILE_BITS1 + PTE_FILE_BITS2 + PTE_FILE_BITS3))) \
- << PTE_FILE_SHIFT4) \
- + _PAGE_FILE })
+#define PTE_FILE_MASK1 ((1U << PTE_FILE_BITS1) - 1)
+#define PTE_FILE_MASK2 ((1U << PTE_FILE_BITS2) - 1)
+#define PTE_FILE_MASK3 ((1U << PTE_FILE_BITS3) - 1)
+
+#define PTE_FILE_LSHIFT2 (PTE_FILE_BITS1)
+#define PTE_FILE_LSHIFT3 (PTE_FILE_BITS1 + PTE_FILE_BITS2)
+#define PTE_FILE_LSHIFT4 (PTE_FILE_BITS1 + PTE_FILE_BITS2 + PTE_FILE_BITS3)
+
+static __always_inline pgoff_t pte_to_pgoff(pte_t pte)
+{
+ return (pgoff_t)
+ (pte_bitop(pte.pte_low, PTE_FILE_SHIFT1, PTE_FILE_MASK1, 0) +
+ pte_bitop(pte.pte_low, PTE_FILE_SHIFT2, PTE_FILE_MASK2, PTE_FILE_LSHIFT2) +
+ pte_bitop(pte.pte_low, PTE_FILE_SHIFT3, PTE_FILE_MASK3, PTE_FILE_LSHIFT3) +
+ pte_bitop(pte.pte_low, PTE_FILE_SHIFT4, -1UL, PTE_FILE_LSHIFT4));
+}
+
+static __always_inline pte_t pgoff_to_pte(pgoff_t off)
+{
+ return (pte_t){
+ .pte_low =
+ pte_bitop(off, 0, PTE_FILE_MASK1, PTE_FILE_SHIFT1) +
+ pte_bitop(off, PTE_FILE_LSHIFT2, PTE_FILE_MASK2, PTE_FILE_SHIFT2) +
+ pte_bitop(off, PTE_FILE_LSHIFT3, PTE_FILE_MASK3, PTE_FILE_SHIFT3) +
+ pte_bitop(off, PTE_FILE_LSHIFT4, -1UL, PTE_FILE_SHIFT4) +
+ _PAGE_FILE,
+ };
+}
#else /* CONFIG_MEM_SOFT_DIRTY */
@@ -115,22 +125,30 @@ static inline pmd_t native_pmdp_get_and_
#define PTE_FILE_BITS1 (PTE_FILE_SHIFT2 - PTE_FILE_SHIFT1 - 1)
#define PTE_FILE_BITS2 (PTE_FILE_SHIFT3 - PTE_FILE_SHIFT2 - 1)
-#define pte_to_pgoff(pte) \
- ((((pte).pte_low >> PTE_FILE_SHIFT1) \
- & ((1U << PTE_FILE_BITS1) - 1)) \
- + ((((pte).pte_low >> PTE_FILE_SHIFT2) \
- & ((1U << PTE_FILE_BITS2) - 1)) << PTE_FILE_BITS1) \
- + (((pte).pte_low >> PTE_FILE_SHIFT3) \
- << (PTE_FILE_BITS1 + PTE_FILE_BITS2)))
-
-#define pgoff_to_pte(off) \
- ((pte_t) { .pte_low = \
- (((off) & ((1U << PTE_FILE_BITS1) - 1)) << PTE_FILE_SHIFT1) \
- + ((((off) >> PTE_FILE_BITS1) & ((1U << PTE_FILE_BITS2) - 1)) \
- << PTE_FILE_SHIFT2) \
- + (((off) >> (PTE_FILE_BITS1 + PTE_FILE_BITS2)) \
- << PTE_FILE_SHIFT3) \
- + _PAGE_FILE })
+#define PTE_FILE_MASK1 ((1U << PTE_FILE_BITS1) - 1)
+#define PTE_FILE_MASK2 ((1U << PTE_FILE_BITS2) - 1)
+
+#define PTE_FILE_LSHIFT2 (PTE_FILE_BITS1)
+#define PTE_FILE_LSHIFT3 (PTE_FILE_BITS1 + PTE_FILE_BITS2)
+
+static __always_inline pgoff_t pte_to_pgoff(pte_t pte)
+{
+ return (pgoff_t)
+ (pte_bitop(pte.pte_low, PTE_FILE_SHIFT1, PTE_FILE_MASK1, 0) +
+ pte_bitop(pte.pte_low, PTE_FILE_SHIFT2, PTE_FILE_MASK2, PTE_FILE_LSHIFT2) +
+ pte_bitop(pte.pte_low, PTE_FILE_SHIFT3, -1UL, PTE_FILE_LSHIFT3));
+}
+
+static __always_inline pte_t pgoff_to_pte(pgoff_t off)
+{
+ return (pte_t){
+ .pte_low =
+ pte_bitop(off, 0, PTE_FILE_MASK1, PTE_FILE_SHIFT1) +
+ pte_bitop(off, PTE_FILE_LSHIFT2, PTE_FILE_MASK2, PTE_FILE_SHIFT2) +
+ pte_bitop(off, PTE_FILE_LSHIFT3, -1UL, PTE_FILE_SHIFT3) +
+ _PAGE_FILE,
+ };
+}
#endif /* CONFIG_MEM_SOFT_DIRTY */
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>