Re: [PATCH v9 12/13] KVM: PPC: Add support for IOMMU in-kernel handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 04, 2013 at 02:01:28AM +1000, Alexey Kardashevskiy wrote:
> On 09/03/2013 08:53 PM, Gleb Natapov wrote:
> > On Mon, Sep 02, 2013 at 01:14:29PM +1000, Alexey Kardashevskiy wrote:
> >> On 09/01/2013 10:06 PM, Gleb Natapov wrote:
> >>> On Wed, Aug 28, 2013 at 06:50:41PM +1000, Alexey Kardashevskiy wrote:
> >>>> This allows the host kernel to handle H_PUT_TCE, H_PUT_TCE_INDIRECT
> >>>> and H_STUFF_TCE requests targeted an IOMMU TCE table without passing
> >>>> them to user space which saves time on switching to user space and back.
> >>>>
> >>>> Both real and virtual modes are supported. The kernel tries to
> >>>> handle a TCE request in the real mode, if fails it passes the request
> >>>> to the virtual mode to complete the operation. If it a virtual mode
> >>>> handler fails, the request is passed to user space.
> >>>>
> >>>> The first user of this is VFIO on POWER. Trampolines to the VFIO external
> >>>> user API functions are required for this patch.
> >>>>
> >>>> This adds a "SPAPR TCE IOMMU" KVM device to associate a logical bus
> >>>> number (LIOBN) with an VFIO IOMMU group fd and enable in-kernel handling
> >>>> of map/unmap requests. The device supports a single attribute which is
> >>>> a struct with LIOBN and IOMMU fd. When the attribute is set, the device
> >>>> establishes the connection between KVM and VFIO.
> >>>>
> >>>> Tests show that this patch increases transmission speed from 220MB/s
> >>>> to 750..1020MB/s on 10Gb network (Chelsea CXGB3 10Gb ethernet card).
> >>>>
> >>>> Signed-off-by: Paul Mackerras <paulus@xxxxxxxxx>
> >>>> Signed-off-by: Alexey Kardashevskiy <aik@xxxxxxxxx>
> >>>>
> >>>> ---
> >>>>
> >>>> Changes:
> >>>> v9:
> >>>> * KVM_CAP_SPAPR_TCE_IOMMU ioctl to KVM replaced with "SPAPR TCE IOMMU"
> >>>> KVM device
> >>>> * release_spapr_tce_table() is not shared between different TCE types
> >>>> * reduced the patch size by moving VFIO external API
> >>>> trampolines to separate patche
> >>>> * moved documentation from Documentation/virtual/kvm/api.txt to
> >>>> Documentation/virtual/kvm/devices/spapr_tce_iommu.txt
> >>>>
> >>>> v8:
> >>>> * fixed warnings from check_patch.pl
> >>>>
> >>>> 2013/07/11:
> >>>> * removed multiple #ifdef IOMMU_API as IOMMU_API is always enabled
> >>>> for KVM_BOOK3S_64
> >>>> * kvmppc_gpa_to_hva_and_get also returns host phys address. Not much sense
> >>>> for this here but the next patch for hugepages support will use it more.
> >>>>
> >>>> 2013/07/06:
> >>>> * added realmode arch_spin_lock to protect TCE table from races
> >>>> in real and virtual modes
> >>>> * POWERPC IOMMU API is changed to support real mode
> >>>> * iommu_take_ownership and iommu_release_ownership are protected by
> >>>> iommu_table's locks
> >>>> * VFIO external user API use rewritten
> >>>> * multiple small fixes
> >>>>
> >>>> 2013/06/27:
> >>>> * tce_list page is referenced now in order to protect it from accident
> >>>> invalidation during H_PUT_TCE_INDIRECT execution
> >>>> * added use of the external user VFIO API
> >>>>
> >>>> 2013/06/05:
> >>>> * changed capability number
> >>>> * changed ioctl number
> >>>> * update the doc article number
> >>>>
> >>>> 2013/05/20:
> >>>> * removed get_user() from real mode handlers
> >>>> * kvm_vcpu_arch::tce_tmp usage extended. Now real mode handler puts there
> >>>> translated TCEs, tries realmode_get_page() on those and if it fails, it
> >>>> passes control over the virtual mode handler which tries to finish
> >>>> the request handling
> >>>> * kvmppc_lookup_pte() now does realmode_get_page() protected by BUSY bit
> >>>> on a page
> >>>> * The only reason to pass the request to user mode now is when the user mode
> >>>> did not register TCE table in the kernel, in all other cases the virtual mode
> >>>> handler is expected to do the job
> >>>> ---
> >>>>  .../virtual/kvm/devices/spapr_tce_iommu.txt        |  37 +++
> >>>>  arch/powerpc/include/asm/kvm_host.h                |   4 +
> >>>>  arch/powerpc/kvm/book3s_64_vio.c                   | 310 ++++++++++++++++++++-
> >>>>  arch/powerpc/kvm/book3s_64_vio_hv.c                | 122 ++++++++
> >>>>  arch/powerpc/kvm/powerpc.c                         |   1 +
> >>>>  include/linux/kvm_host.h                           |   1 +
> >>>>  virt/kvm/kvm_main.c                                |   5 +
> >>>>  7 files changed, 477 insertions(+), 3 deletions(-)
> >>>>  create mode 100644 Documentation/virtual/kvm/devices/spapr_tce_iommu.txt
> >>>>
> >>>> diff --git a/Documentation/virtual/kvm/devices/spapr_tce_iommu.txt b/Documentation/virtual/kvm/devices/spapr_tce_iommu.txt
> >>>> new file mode 100644
> >>>> index 0000000..4bc8fc3
> >>>> --- /dev/null
> >>>> +++ b/Documentation/virtual/kvm/devices/spapr_tce_iommu.txt
> >>>> @@ -0,0 +1,37 @@
> >>>> +SPAPR TCE IOMMU device
> >>>> +
> >>>> +Capability: KVM_CAP_SPAPR_TCE_IOMMU
> >>>> +Architectures: powerpc
> >>>> +
> >>>> +Device type supported: KVM_DEV_TYPE_SPAPR_TCE_IOMMU
> >>>> +
> >>>> +Groups:
> >>>> +  KVM_DEV_SPAPR_TCE_IOMMU_ATTR_LINKAGE
> >>>> +  Attributes: single attribute with pair { LIOBN, IOMMU fd}
> >>>> +
> >>>> +This is completely made up device which provides API to link
> >>>> +logical bus number (LIOBN) and IOMMU group. The user space has
> >>>> +to create a new SPAPR TCE IOMMU device per a logical bus.
> >>>> +
> >>> Why not have one device that can handle multimple links?
> >>
> >>
> >> I can do that. If I make it so, it won't even look as a device at all, just
> >> some weird interface to KVM but ok. What bothers me is it is just a
> > May be I do not understand usage pattern here. Why do you feel that device
> > that can handle multiple links is worse than device per link? How many logical
> > buses is there usually? How often they created/destroyed? I am not insisting
> > on the change, just trying to understand why you do not like it.
> 
> 
> Is it usually one PCI host bus adapter per IOMMU group which is usually
> one PCI card or 2-3 cards if it is a legacy PCI-X, and they are created
> when QEMU-KVM starts. Not many. And they live till KVM ends.
> 
> My point is why would I want to put all links to one device? It all is just
> a matter of taste and nothing more. Or I am missing something but I do not
> see what. If it is all about making thing to be kosher/halal/orthodox, then
> I have more stuff to do, like reworking the emulated TCEs. But if is it for
> (I do not know, just guessing) performance or something like that - then
> I'll fix it, I just need to know what I am fixing.
> 
Each device creates an fd, if you can have a lot of them eventually this
will be a bottleneck. You are saying this is not the case, so lets go
with proposed interface.
 
--
			Gleb.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]