Hi Minchan,
On Mon, Aug 05, 2013 at 11:17:15AM +0900, Minchan Kim wrote:
>Hello Wanpeng,
>
>On Mon, Aug 05, 2013 at 09:48:29AM +0800, Wanpeng Li wrote:
>> On Wed, Jul 31, 2013 at 12:41:55AM +0400, Cyrill Gorcunov wrote:
>> >Andy Lutomirski reported that in case if a page with _PAGE_SOFT_DIRTY
>> >bit set get swapped out, the bit is getting lost and no longer
>> >available when pte read back.
>> >
>> >To resolve this we introduce _PTE_SWP_SOFT_DIRTY bit which is
>> >saved in pte entry for the page being swapped out. When such page
>> >is to be read back from a swap cache we check for bit presence
>> >and if it's there we clear it and restore the former _PAGE_SOFT_DIRTY
>> >bit back.
>> >
>> >One of the problem was to find a place in pte entry where we can
>> >save the _PTE_SWP_SOFT_DIRTY bit while page is in swap. The
>> >_PAGE_PSE was chosen for that, it doesn't intersect with swap
>> >entry format stored in pte.
>> >
>> >Reported-by: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
>> >Signed-off-by: Cyrill Gorcunov <gorcunov@xxxxxxxxxx>
>> >Cc: Pavel Emelyanov <xemul@xxxxxxxxxxxxx>
>> >Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
>> >Cc: Matt Mackall <mpm@xxxxxxxxxxx>
>> >Cc: Xiao Guangrong <xiaoguangrong@xxxxxxxxxxxxxxxxxx>
>> >Cc: Marcelo Tosatti <mtosatti@xxxxxxxxxx>
>> >Cc: KOSAKI Motohiro <kosaki.motohiro@xxxxxxxxx>
>> >Cc: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
>> >Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
>> >Cc: "Aneesh Kumar K.V" <aneesh.kumar@xxxxxxxxxxxxxxxxxx>
>> >---
>> > arch/x86/include/asm/pgtable.h | 15 +++++++++++++++
>> > arch/x86/include/asm/pgtable_types.h | 13 +++++++++++++
>> > fs/proc/task_mmu.c | 21 +++++++++++++++------
>> > include/asm-generic/pgtable.h | 15 +++++++++++++++
>> > include/linux/swapops.h | 2 ++
>> > mm/memory.c | 2 ++
>> > mm/rmap.c | 6 +++++-
>> > mm/swapfile.c | 19 +++++++++++++++++--
>> > 8 files changed, 84 insertions(+), 9 deletions(-)
>> >
>> >Index: linux-2.6.git/arch/x86/include/asm/pgtable.h
>> >===================================================================
>> >--- linux-2.6.git.orig/arch/x86/include/asm/pgtable.h
>> >+++ linux-2.6.git/arch/x86/include/asm/pgtable.h
>> >@@ -314,6 +314,21 @@ static inline pmd_t pmd_mksoft_dirty(pmd
>> > return pmd_set_flags(pmd, _PAGE_SOFT_DIRTY);
>> > }
>> >
>> >+static inline pte_t pte_swp_mksoft_dirty(pte_t pte)
>> >+{
>> >+ return pte_set_flags(pte, _PAGE_SWP_SOFT_DIRTY);
>> >+}
>> >+
>> >+static inline int pte_swp_soft_dirty(pte_t pte)
>> >+{
>> >+ return pte_flags(pte) & _PAGE_SWP_SOFT_DIRTY;
>> >+}
>> >+
>> >+static inline pte_t pte_swp_clear_soft_dirty(pte_t pte)
>> >+{
>> >+ return pte_clear_flags(pte, _PAGE_SWP_SOFT_DIRTY);
>> >+}
>> >+
>> > /*
>> > * Mask out unsupported bits in a present pgprot. Non-present pgprots
>> > * can use those bits for other purposes, so leave them be.
>> >Index: linux-2.6.git/arch/x86/include/asm/pgtable_types.h
>> >===================================================================
>> >--- linux-2.6.git.orig/arch/x86/include/asm/pgtable_types.h
>> >+++ linux-2.6.git/arch/x86/include/asm/pgtable_types.h
>> >@@ -67,6 +67,19 @@
>> > #define _PAGE_SOFT_DIRTY (_AT(pteval_t, 0))
>> > #endif
>> >
>> >+/*
>> >+ * Tracking soft dirty bit when a page goes to a swap is tricky.
>> >+ * We need a bit which can be stored in pte _and_ not conflict
>> >+ * with swap entry format. On x86 bits 6 and 7 are *not* involved
>> >+ * into swap entry computation, but bit 6 is used for nonlinear
>> >+ * file mapping, so we borrow bit 7 for soft dirty tracking.
>> >+ */
>> >+#ifdef CONFIG_MEM_SOFT_DIRTY
>> >+#define _PAGE_SWP_SOFT_DIRTY _PAGE_PSE
>> >+#else
>> >+#define _PAGE_SWP_SOFT_DIRTY (_AT(pteval_t, 0))
>> >+#endif
>> >+
>> > #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
>> > #define _PAGE_NX (_AT(pteval_t, 1) << _PAGE_BIT_NX)
>> > #else
>> >Index: linux-2.6.git/fs/proc/task_mmu.c
>> >===================================================================
>> >--- linux-2.6.git.orig/fs/proc/task_mmu.c
>> >+++ linux-2.6.git/fs/proc/task_mmu.c
>> >@@ -730,8 +730,14 @@ static inline void clear_soft_dirty(stru
>> > * of how soft-dirty works.
>> > */
>> > pte_t ptent = *pte;
>> >- ptent = pte_wrprotect(ptent);
>> >- ptent = pte_clear_flags(ptent, _PAGE_SOFT_DIRTY);
>> >+
>> >+ if (pte_present(ptent)) {
>> >+ ptent = pte_wrprotect(ptent);
>> >+ ptent = pte_clear_flags(ptent, _PAGE_SOFT_DIRTY);
>> >+ } else if (is_swap_pte(ptent)) {
>> >+ ptent = pte_swp_clear_soft_dirty(ptent);
>> >+ }
>> >+
>> > set_pte_at(vma->vm_mm, addr, pte, ptent);
>> > #endif
>> > }
>> >@@ -752,14 +758,15 @@ static int clear_refs_pte_range(pmd_t *p
>> > pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
>> > for (; addr != end; pte++, addr += PAGE_SIZE) {
>> > ptent = *pte;
>> >- if (!pte_present(ptent))
>> >- continue;
>> >
>> > if (cp->type == CLEAR_REFS_SOFT_DIRTY) {
>> > clear_soft_dirty(vma, addr, pte);
>> > continue;
>> > }
>> >
>> >+ if (!pte_present(ptent))
>> >+ continue;
>> >+
>> > page = vm_normal_page(vma, addr, ptent);
>> > if (!page)
>> > continue;
>> >@@ -930,8 +937,10 @@ static void pte_to_pagemap_entry(pagemap
>> > flags = PM_PRESENT;
>> > page = vm_normal_page(vma, addr, pte);
>> > } else if (is_swap_pte(pte)) {
>> >- swp_entry_t entry = pte_to_swp_entry(pte);
>> >-
>> >+ swp_entry_t entry;
>> >+ if (pte_swp_soft_dirty(pte))
>> >+ flags2 |= __PM_SOFT_DIRTY;
>> >+ entry = pte_to_swp_entry(pte);
>> > frame = swp_type(entry) |
>> > (swp_offset(entry) << MAX_SWAPFILES_SHIFT);
>> > flags = PM_SWAP;
>> >Index: linux-2.6.git/include/asm-generic/pgtable.h
>> >===================================================================
>> >--- linux-2.6.git.orig/include/asm-generic/pgtable.h
>> >+++ linux-2.6.git/include/asm-generic/pgtable.h
>> >@@ -417,6 +417,21 @@ static inline pmd_t pmd_mksoft_dirty(pmd
>> > {
>> > return pmd;
>> > }
>> >+
>> >+static inline pte_t pte_swp_mksoft_dirty(pte_t pte)
>> >+{
>> >+ return pte;
>> >+}
>> >+
>> >+static inline int pte_swp_soft_dirty(pte_t pte)
>> >+{
>> >+ return 0;
>> >+}
>> >+
>> >+static inline pte_t pte_swp_clear_soft_dirty(pte_t pte)
>> >+{
>> >+ return pte;
>> >+}
>> > #endif
>> >
>> > #ifndef __HAVE_PFNMAP_TRACKING
>> >Index: linux-2.6.git/include/linux/swapops.h
>> >===================================================================
>> >--- linux-2.6.git.orig/include/linux/swapops.h
>> >+++ linux-2.6.git/include/linux/swapops.h
>> >@@ -67,6 +67,8 @@ static inline swp_entry_t pte_to_swp_ent
>> > swp_entry_t arch_entry;
>> >
>> > BUG_ON(pte_file(pte));
>> >+ if (pte_swp_soft_dirty(pte))
>> >+ pte = pte_swp_clear_soft_dirty(pte);
>> > arch_entry = __pte_to_swp_entry(pte);
>> > return swp_entry(__swp_type(arch_entry), __swp_offset(arch_entry));
>> > }
>> >Index: linux-2.6.git/mm/memory.c
>> >===================================================================
>> >--- linux-2.6.git.orig/mm/memory.c
>> >+++ linux-2.6.git/mm/memory.c
>> >@@ -3115,6 +3115,8 @@ static int do_swap_page(struct mm_struct
>> > exclusive = 1;
>> > }
>> > flush_icache_page(vma, page);
>> >+ if (pte_swp_soft_dirty(orig_pte))
>> >+ pte = pte_mksoft_dirty(pte);
>>
>> entry = pte_to_swp_entry(orig_pte);
>> orig_pte's _PTE_SWP_SOFT_DIRTY bit has already been cleared.
>
>You seem to walk same way with me.
>Please look at my stupid questions in this thread.
>
I see your discussion with Cyrill, however, pte_to_swp_entry and pte_swp_soft_dirty
both against orig_pte, where I miss? ;-)
>>
>> > set_pte_at(mm, address, page_table, pte);
>> > if (page == swapcache)
>> > do_page_add_anon_rmap(page, vma, address, exclusive);
>> >Index: linux-2.6.git/mm/rmap.c
>> >===================================================================
>> >--- linux-2.6.git.orig/mm/rmap.c
>> >+++ linux-2.6.git/mm/rmap.c
>> >@@ -1236,6 +1236,7 @@ int try_to_unmap_one(struct page *page,
>> > swp_entry_to_pte(make_hwpoison_entry(page)));
>> > } else if (PageAnon(page)) {
>> > swp_entry_t entry = { .val = page_private(page) };
>> >+ pte_t swp_pte;
>> >
>> > if (PageSwapCache(page)) {
>> > /*
>> >@@ -1264,7 +1265,10 @@ int try_to_unmap_one(struct page *page,
>> > BUG_ON(TTU_ACTION(flags) != TTU_MIGRATION);
>> > entry = make_migration_entry(page, pte_write(pteval));
>> > }
>> >- set_pte_at(mm, address, pte, swp_entry_to_pte(entry));
>> >+ swp_pte = swp_entry_to_pte(entry);
>> >+ if (pte_soft_dirty(pteval))
>> >+ swp_pte = pte_swp_mksoft_dirty(swp_pte);
>> >+ set_pte_at(mm, address, pte, swp_pte);
>> > BUG_ON(pte_file(*pte));
>> > } else if (IS_ENABLED(CONFIG_MIGRATION) &&
>> > (TTU_ACTION(flags) == TTU_MIGRATION)) {
>> >Index: linux-2.6.git/mm/swapfile.c
>> >===================================================================
>> >--- linux-2.6.git.orig/mm/swapfile.c
>> >+++ linux-2.6.git/mm/swapfile.c
>> >@@ -866,6 +866,21 @@ unsigned int count_swap_pages(int type,
>> > }
>> > #endif /* CONFIG_HIBERNATION */
>> >
>> >+static inline int maybe_same_pte(pte_t pte, pte_t swp_pte)
>> >+{
>> >+#ifdef CONFIG_MEM_SOFT_DIRTY
>> >+ /*
>> >+ * When pte keeps soft dirty bit the pte generated
>> >+ * from swap entry does not has it, still it's same
>> >+ * pte from logical point of view.
>> >+ */
>> >+ pte_t swp_pte_dirty = pte_swp_mksoft_dirty(swp_pte);
>> >+ return pte_same(pte, swp_pte) || pte_same(pte, swp_pte_dirty);
>> >+#else
>> >+ return pte_same(pte, swp_pte);
>> >+#endif
>> >+}
>> >+
>> > /*
>> > * No need to decide whether this PTE shares the swap entry with others,
>> > * just let do_wp_page work it out if a write is requested later - to
>> >@@ -892,7 +907,7 @@ static int unuse_pte(struct vm_area_stru
>> > }
>> >
>> > pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
>> >- if (unlikely(!pte_same(*pte, swp_entry_to_pte(entry)))) {
>> >+ if (unlikely(!maybe_same_pte(*pte, swp_entry_to_pte(entry)))) {
>> > mem_cgroup_cancel_charge_swapin(memcg);
>> > ret = 0;
>> > goto out;
>> >@@ -947,7 +962,7 @@ static int unuse_pte_range(struct vm_are
>> > * swapoff spends a _lot_ of time in this loop!
>> > * Test inline before going to call unuse_pte.
>> > */
>> >- if (unlikely(pte_same(*pte, swp_pte))) {
>> >+ if (unlikely(maybe_same_pte(*pte, swp_pte))) {
>> > pte_unmap(pte);
>> > ret = unuse_pte(vma, pmd, addr, entry, page);
>> > if (ret)
>> >
>> >--
>> >To unsubscribe, send a message with 'unsubscribe linux-mm' in
>> >the body to majordomo@xxxxxxxxx. For more info on Linux MM,
>> >see: http://www.linux-mm.org/ .
>> >Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>
>>
>> --
>> To unsubscribe, send a message with 'unsubscribe linux-mm' in
>> the body to majordomo@xxxxxxxxx. For more info on Linux MM,
>> see: http://www.linux-mm.org/ .
>> Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>
>
>--
>Kind regards,
>Minchan Kim
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>