From: Miklos Szeredi <mszeredi@xxxxxxx>
The feature prevents mistrusted filesystems to grow a large number of dirty
pages before throttling. For such filesystems balance_dirty_pages always
check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under
"freerun", it's not allowed to skip bdi checks. The only use case for now is
fuse: it sets bdi max_ratio to 1% by default and system administrators are
supposed to expect that this limit won't be exceeded.
The feature is on if address space is marked by AS_STRICTLIMIT flag.
A filesystem may set the flag when it initializes a new inode.
Changed in v2 (thanks to Andrew Morton):
- added a few explanatory comments
- cleaned up the mess in backing_dev_info foo_stamp fields: now it's clearly
stated that bw_time_stamp is measured in jiffies; renamed other foo_stamp
fields to reflect that they are in units of number-of-pages.
Signed-off-by: Maxim Patlasov <MPatlasov@xxxxxxxxxxxxx>
---
fs/fs-writeback.c | 2
fs/fuse/file.c | 3 +
fs/fuse/inode.c | 1
include/linux/backing-dev.h | 22 ++++-
include/linux/pagemap.h | 1
include/linux/writeback.h | 3 -
mm/backing-dev.c | 5 +
mm/page-writeback.c | 176 +++++++++++++++++++++++++++++++++++--------
8 files changed, 171 insertions(+), 42 deletions(-)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 3be5718..8c75277 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -762,7 +762,7 @@ static bool over_bground_thresh(struct backing_dev_info *bdi)
static void wb_update_bandwidth(struct bdi_writeback *wb,
unsigned long start_time)
{
- __bdi_update_bandwidth(wb->bdi, 0, 0, 0, 0, 0, start_time);
+ __bdi_update_bandwidth(wb->bdi, 0, 0, 0, 0, 0, start_time, false);
}
/*
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 6d30db1..99b5c97 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1697,6 +1697,7 @@ static int fuse_writepage_locked(struct page *page,
req->inode = inode;
inc_bdi_stat(mapping->backing_dev_info, BDI_WRITEBACK);
+ inc_bdi_stat(mapping->backing_dev_info, BDI_WRITTEN_BACK);
inc_zone_page_state(tmp_page, NR_WRITEBACK_TEMP);
end_page_writeback(page);
@@ -1766,6 +1767,7 @@ static int fuse_send_writepages(struct fuse_fill_wb_data *data)
if (tmp_page) {
copy_highpage(tmp_page, page);
inc_bdi_stat(bdi, BDI_WRITEBACK);
+ inc_bdi_stat(bdi, BDI_WRITTEN_BACK);
inc_zone_page_state(tmp_page, NR_WRITEBACK_TEMP);
} else
all_ok = 0;
@@ -1781,6 +1783,7 @@ static int fuse_send_writepages(struct fuse_fill_wb_data *data)
struct page *page = req->pages[i];
if (page) {
dec_bdi_stat(bdi, BDI_WRITEBACK);
+ dec_bdi_stat(bdi, BDI_WRITTEN_BACK);
dec_zone_page_state(page, NR_WRITEBACK_TEMP);
__free_page(page);
req->pages[i] = NULL;
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 4beb8e3..00a28af 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -305,6 +305,7 @@ struct inode *fuse_iget(struct super_block *sb, u64 nodeid,
inode->i_flags |= S_NOCMTIME;
inode->i_generation = generation;
inode->i_data.backing_dev_info = &fc->bdi;
+ set_bit(AS_STRICTLIMIT, &inode->i_data.flags);
fuse_init_inode(inode, attr);
unlock_new_inode(inode);
} else if ((inode->i_mode ^ attr->mode) & S_IFMT) {
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index c388155..6b12d01 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -33,6 +33,8 @@ enum bdi_state {
BDI_sync_congested, /* The sync queue is getting full */
BDI_registered, /* bdi_register() was done */
BDI_writeback_running, /* Writeback is in progress */
+ BDI_idle, /* No pages under writeback at the moment of
+ * last update of write bw */
BDI_unused, /* Available bits start here */
};
@@ -41,8 +43,15 @@ typedef int (congested_fn)(void *, int);
enum bdi_stat_item {
BDI_RECLAIMABLE,
BDI_WRITEBACK,
- BDI_DIRTIED,
- BDI_WRITTEN,
+
+ /*
+ * The three counters below reflects number of events of specific type
+ * happened since bdi_init(). The type is defined in comments below:
+ */
+ BDI_DIRTIED, /* a page was dirtied */
+ BDI_WRITTEN, /* writeout completed for a page */
+ BDI_WRITTEN_BACK, /* a page went to writeback */
+
NR_BDI_STAT_ITEMS
};
@@ -73,9 +82,12 @@ struct backing_dev_info {
struct percpu_counter bdi_stat[NR_BDI_STAT_ITEMS];
- unsigned long bw_time_stamp; /* last time write bw is updated */
- unsigned long dirtied_stamp;
- unsigned long written_stamp; /* pages written at bw_time_stamp */
+ unsigned long bw_time_stamp; /* last time (in jiffies) write bw
+ * is updated */
+ unsigned long dirtied_nr_stamp;
+ unsigned long written_nr_stamp; /* pages written at bw_time_stamp */
+ unsigned long writeback_nr_stamp; /* pages sent to writeback at
+ * bw_time_stamp */
unsigned long write_bandwidth; /* the estimated write bandwidth */
unsigned long avg_write_bandwidth; /* further smoothed write bw */
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index e3dea75..baac702 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -25,6 +25,7 @@ enum mapping_flags {
AS_MM_ALL_LOCKS = __GFP_BITS_SHIFT + 2, /* under mm_take_all_locks() */
AS_UNEVICTABLE = __GFP_BITS_SHIFT + 3, /* e.g., ramdisk, SHM_LOCK */
AS_BALLOON_MAP = __GFP_BITS_SHIFT + 4, /* balloon page special map */
+ AS_STRICTLIMIT = __GFP_BITS_SHIFT + 5, /* strict dirty limit */
};
static inline void mapping_set_error(struct address_space *mapping, int error)
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 579a500..5144051 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -159,7 +159,8 @@ void __bdi_update_bandwidth(struct backing_dev_info *bdi,
unsigned long dirty,
unsigned long bdi_thresh,
unsigned long bdi_dirty,
- unsigned long start_time);
+ unsigned long start_time,
+ bool strictlimit);
void page_writeback_init(void);
void balance_dirty_pages_ratelimited(struct address_space *mapping);
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 5025174..acfeec7 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -94,6 +94,7 @@ static int bdi_debug_stats_show(struct seq_file *m, void *v)
"BackgroundThresh: %10lu kB\n"
"BdiDirtied: %10lu kB\n"
"BdiWritten: %10lu kB\n"
+ "BdiWrittenBack: %10lu kB\n"
"BdiWriteBandwidth: %10lu kBps\n"
"b_dirty: %10lu\n"
"b_io: %10lu\n"
@@ -107,6 +108,7 @@ static int bdi_debug_stats_show(struct seq_file *m, void *v)
K(background_thresh),
(unsigned long) K(bdi_stat(bdi, BDI_DIRTIED)),
(unsigned long) K(bdi_stat(bdi, BDI_WRITTEN)),
+ (unsigned long) K(bdi_stat(bdi, BDI_WRITTEN_BACK)),
(unsigned long) K(bdi->write_bandwidth),
nr_dirty,
nr_io,
@@ -454,7 +456,8 @@ int bdi_init(struct backing_dev_info *bdi)
bdi->dirty_exceeded = 0;
bdi->bw_time_stamp = jiffies;
- bdi->written_stamp = 0;
+ bdi->written_nr_stamp = 0;
+ bdi->writeback_nr_stamp = 0;
bdi->balanced_dirty_ratelimit = INIT_BW;
bdi->dirty_ratelimit = INIT_BW;
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 4514ad7..83c7434 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -585,6 +585,37 @@ unsigned long bdi_dirty_limit(struct backing_dev_info *bdi, unsigned long dirty)
}
/*
+ * setpoint - dirty 3
+ * f(dirty) := 1.0 + (----------------)
+ * limit - setpoint
+ *
+ * it's a 3rd order polynomial that subjects to
+ *
+ * (1) f(freerun) = 2.0 => rampup dirty_ratelimit reasonably fast
+ * (2) f(setpoint) = 1.0 => the balance point
+ * (3) f(limit) = 0 => the hard limit
+ * (4) df/dx <= 0 => negative feedback control
+ * (5) the closer to setpoint, the smaller |df/dx| (and the reverse)
+ * => fast response on large errors; small oscillation near setpoint
+ */
+static inline long long pos_ratio_polynom(unsigned long setpoint,
+ unsigned long dirty,
+ unsigned long limit)
+{
+ long long pos_ratio;
+ long x;
+
+ x = div_s64(((s64)setpoint - (s64)dirty) << RATELIMIT_CALC_SHIFT,
+ limit - setpoint + 1);
+ pos_ratio = x;
+ pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
+ pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
+ pos_ratio += 1 << RATELIMIT_CALC_SHIFT;
+
+ return pos_ratio;
+}
+
+/*
* Dirty position control.
*
* (o) global/bdi setpoints
@@ -664,7 +695,8 @@ static unsigned long bdi_position_ratio(struct backing_dev_info *bdi,
unsigned long bg_thresh,
unsigned long dirty,
unsigned long bdi_thresh,
- unsigned long bdi_dirty)
+ unsigned long bdi_dirty,
+ bool strictlimit)
{
unsigned long write_bw = bdi->avg_write_bandwidth;
unsigned long freerun = dirty_freerun_ceiling(thresh, bg_thresh);
@@ -680,28 +712,55 @@ static unsigned long bdi_position_ratio(struct backing_dev_info *bdi,
return 0;
/*
- * global setpoint
+ * The strictlimit feature is a tool preventing mistrusted filesystems
+ * to grow a large number of dirty pages before throttling. For such
+ * filesystems balance_dirty_pages always checks bdi counters against
+ * bdi limits. Even if global "nr_dirty" is under "freerun". This is
+ * especially important for fuse who sets bdi->max_ratio to 1% by
+ * default. Without strictlimit feature, fuse writeback may consume
+ * arbitrary amount of RAM because it is accounted in
+ * NR_WRITEBACK_TEMP which is not involved in calculating "nr_dirty".
*
- * setpoint - dirty 3
- * f(dirty) := 1.0 + (----------------)
- * limit - setpoint
+ * Here, in bdi_position_ratio(), we calculate pos_ratio based on
+ * two values: bdi_dirty and bdi_thresh. Let's consider an example:
+ * total amount of RAM is 16GB, bdi->max_ratio is equal to 1%, global
+ * limits are set by default to 10% and 20% (background and throttle).
+ * Then bdi_thresh is 1% of 20% of 16GB. This amounts to ~8K pages.
+ * bdi_dirty_limit(bdi, bg_thresh) is about ~4K pages. bdi_setpoint is
+ * about ~6K pages (as the average of background and throttle bdi
+ * limits). The 3rd order polynomial will provide positive feedback if
+ * bdi_dirty is under bdi_setpoint and vice versa.
*
- * it's a 3rd order polynomial that subjects to
+ * Note, that we cannot use global counters in these calculations
+ * because we want to throttle process writing to strictlimit address
+ * space much earlier than global "freerun" is reached (~23MB vs.
+ * ~2.3GB in the example above).
+ */
+ if (unlikely(strictlimit)) {
+ if (bdi_dirty < 8)
+ return 2 << RATELIMIT_CALC_SHIFT;
+
+ if (bdi_dirty >= bdi_thresh)
+ return 0;
+
+ bdi_setpoint = bdi_thresh + bdi_dirty_limit(bdi, bg_thresh);
+ bdi_setpoint /= 2;
+
+ if (bdi_setpoint == 0 || bdi_setpoint == bdi_thresh)
+ return 0;
+
+ pos_ratio = pos_ratio_polynom(bdi_setpoint, bdi_dirty,
+ bdi_thresh);
+ return min_t(long long, pos_ratio, 2 << RATELIMIT_CALC_SHIFT);
+ }
+
+ /*
+ * global setpoint
*
- * (1) f(freerun) = 2.0 => rampup dirty_ratelimit reasonably fast
- * (2) f(setpoint) = 1.0 => the balance point
- * (3) f(limit) = 0 => the hard limit
- * (4) df/dx <= 0 => negative feedback control
- * (5) the closer to setpoint, the smaller |df/dx| (and the reverse)
- * => fast response on large errors; small oscillation near setpoint
+ * See comment for pos_ratio_polynom().
*/
setpoint = (freerun + limit) / 2;
- x = div_s64(((s64)setpoint - (s64)dirty) << RATELIMIT_CALC_SHIFT,
- limit - setpoint + 1);
- pos_ratio = x;
- pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
- pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
- pos_ratio += 1 << RATELIMIT_CALC_SHIFT;
+ pos_ratio = pos_ratio_polynom(setpoint, dirty, limit);
/*
* We have computed basic pos_ratio above based on global situation. If
@@ -799,7 +858,7 @@ static void bdi_update_write_bandwidth(struct backing_dev_info *bdi,
* write_bandwidth = ---------------------------------------------------
* period
*/
- bw = written - bdi->written_stamp;
+ bw = written - bdi->written_nr_stamp;
bw *= HZ;
if (unlikely(elapsed > period)) {
do_div(bw, elapsed);
@@ -892,7 +951,8 @@ static void bdi_update_dirty_ratelimit(struct backing_dev_info *bdi,
unsigned long bdi_thresh,
unsigned long bdi_dirty,
unsigned long dirtied,
- unsigned long elapsed)
+ unsigned long elapsed,
+ bool strictlimit)
{
unsigned long freerun = dirty_freerun_ceiling(thresh, bg_thresh);
unsigned long limit = hard_dirty_limit(thresh);
@@ -910,10 +970,10 @@ static void bdi_update_dirty_ratelimit(struct backing_dev_info *bdi,
* The dirty rate will match the writeout rate in long term, except
* when dirty pages are truncated by userspace or re-dirtied by FS.
*/
- dirty_rate = (dirtied - bdi->dirtied_stamp) * HZ / elapsed;
+ dirty_rate = (dirtied - bdi->dirtied_nr_stamp) * HZ / elapsed;
pos_ratio = bdi_position_ratio(bdi, thresh, bg_thresh, dirty,
- bdi_thresh, bdi_dirty);
+ bdi_thresh, bdi_dirty, strictlimit);
/*
* task_ratelimit reflects each dd's dirty rate for the past 200ms.
*/
@@ -994,6 +1054,26 @@ static void bdi_update_dirty_ratelimit(struct backing_dev_info *bdi,
* keep that period small to reduce time lags).
*/
step = 0;
+
+ /*
+ * For strictlimit case, balanced_dirty_ratelimit was calculated
+ * above based on bdi counters and limits (see bdi_position_ratio()).
+ * Hence, to calculate "step" properly, we have to use bdi_dirty as
+ * "dirty" and bdi_setpoint as "setpoint".
+ *
+ * We rampup dirty_ratelimit forcibly if bdi_dirty is low because
+ * it's possible that bdi_thresh is close to zero due to inactivity
+ * of backing device (see the implementation of bdi_dirty_limit()).
+ */
+ if (unlikely(strictlimit)) {
+ dirty = bdi_dirty;
+ if (bdi_dirty < 8)
+ setpoint = bdi_dirty + 1;
+ else
+ setpoint = (bdi_thresh +
+ bdi_dirty_limit(bdi, bg_thresh)) / 2;
+ }
+
if (dirty < setpoint) {
x = min(bdi->balanced_dirty_ratelimit,
min(balanced_dirty_ratelimit, task_ratelimit));
@@ -1034,12 +1114,14 @@ void __bdi_update_bandwidth(struct backing_dev_info *bdi,
unsigned long dirty,
unsigned long bdi_thresh,
unsigned long bdi_dirty,
- unsigned long start_time)
+ unsigned long start_time,
+ bool strictlimit)
{
unsigned long now = jiffies;
unsigned long elapsed = now - bdi->bw_time_stamp;
unsigned long dirtied;
unsigned long written;
+ unsigned long writeback;
/*
* rate-limit, only update once every 200ms.
@@ -1049,6 +1131,7 @@ void __bdi_update_bandwidth(struct backing_dev_info *bdi,
dirtied = percpu_counter_read(&bdi->bdi_stat[BDI_DIRTIED]);
written = percpu_counter_read(&bdi->bdi_stat[BDI_WRITTEN]);
+ writeback = bdi_stat_sum(bdi, BDI_WRITTEN_BACK);
/*
* Skip quiet periods when disk bandwidth is under-utilized.
@@ -1057,18 +1140,32 @@ void __bdi_update_bandwidth(struct backing_dev_info *bdi,
if (elapsed > HZ && time_before(bdi->bw_time_stamp, start_time))
goto snapshot;
+ /*
+ * Skip periods when backing dev was idle due to abscence of pages
+ * under writeback (when over_bground_thresh() returns false)
+ */
+ if (test_bit(BDI_idle, &bdi->state) &&
+ bdi->writeback_nr_stamp == writeback)
+ goto snapshot;
+
if (thresh) {
global_update_bandwidth(thresh, dirty, now);
bdi_update_dirty_ratelimit(bdi, thresh, bg_thresh, dirty,
bdi_thresh, bdi_dirty,
- dirtied, elapsed);
+ dirtied, elapsed, strictlimit);
}
bdi_update_write_bandwidth(bdi, elapsed, written);
snapshot:
- bdi->dirtied_stamp = dirtied;
- bdi->written_stamp = written;
+ bdi->dirtied_nr_stamp = dirtied;
+ bdi->written_nr_stamp = written;
bdi->bw_time_stamp = now;
+
+ bdi->writeback_nr_stamp = writeback;
+ if (bdi_stat_sum(bdi, BDI_WRITEBACK) == 0)
+ set_bit(BDI_idle, &bdi->state);
+ else
+ clear_bit(BDI_idle, &bdi->state);
}
static void bdi_update_bandwidth(struct backing_dev_info *bdi,
@@ -1077,13 +1174,14 @@ static void bdi_update_bandwidth(struct backing_dev_info *bdi,
unsigned long dirty,
unsigned long bdi_thresh,
unsigned long bdi_dirty,
- unsigned long start_time)
+ unsigned long start_time,
+ bool strictlimit)
{
if (time_is_after_eq_jiffies(bdi->bw_time_stamp + BANDWIDTH_INTERVAL))
return;
spin_lock(&bdi->wb.list_lock);
__bdi_update_bandwidth(bdi, thresh, bg_thresh, dirty,
- bdi_thresh, bdi_dirty, start_time);
+ bdi_thresh, bdi_dirty, start_time, strictlimit);
spin_unlock(&bdi->wb.list_lock);
}
@@ -1226,6 +1324,7 @@ static void balance_dirty_pages(struct address_space *mapping,
unsigned long dirty_ratelimit;
unsigned long pos_ratio;
struct backing_dev_info *bdi = mapping->backing_dev_info;
+ bool strictlimit = test_bit(AS_STRICTLIMIT, &mapping->flags);
unsigned long start_time = jiffies;
for (;;) {
@@ -1250,7 +1349,7 @@ static void balance_dirty_pages(struct address_space *mapping,
*/
freerun = dirty_freerun_ceiling(dirty_thresh,
background_thresh);
- if (nr_dirty <= freerun) {
+ if (nr_dirty <= freerun && !strictlimit) {
current->dirty_paused_when = now;
current->nr_dirtied = 0;
current->nr_dirtied_pause =
@@ -1258,7 +1357,7 @@ static void balance_dirty_pages(struct address_space *mapping,
break;
}
- if (unlikely(!writeback_in_progress(bdi)))
+ if (unlikely(!writeback_in_progress(bdi)) && !strictlimit)
bdi_start_background_writeback(bdi);
/*
@@ -1296,19 +1395,24 @@ static void balance_dirty_pages(struct address_space *mapping,
bdi_stat(bdi, BDI_WRITEBACK);
}
+ if (unlikely(!writeback_in_progress(bdi)) &&
+ bdi_dirty > bdi_thresh / 4)
+ bdi_start_background_writeback(bdi);
+
dirty_exceeded = (bdi_dirty > bdi_thresh) &&
- (nr_dirty > dirty_thresh);
+ ((nr_dirty > dirty_thresh) || strictlimit);
if (dirty_exceeded && !bdi->dirty_exceeded)
bdi->dirty_exceeded = 1;
bdi_update_bandwidth(bdi, dirty_thresh, background_thresh,
nr_dirty, bdi_thresh, bdi_dirty,
- start_time);
+ start_time, strictlimit);
dirty_ratelimit = bdi->dirty_ratelimit;
pos_ratio = bdi_position_ratio(bdi, dirty_thresh,
background_thresh, nr_dirty,
- bdi_thresh, bdi_dirty);
+ bdi_thresh, bdi_dirty,
+ strictlimit);
task_ratelimit = ((u64)dirty_ratelimit * pos_ratio) >>
RATELIMIT_CALC_SHIFT;
max_pause = bdi_max_pause(bdi, bdi_dirty);
@@ -1362,6 +1466,8 @@ static void balance_dirty_pages(struct address_space *mapping,
}
pause:
+ if (unlikely(!writeback_in_progress(bdi)))
+ bdi_start_background_writeback(bdi);
trace_balance_dirty_pages(bdi,
dirty_thresh,
background_thresh,
@@ -2265,8 +2371,10 @@ int test_set_page_writeback(struct page *page)
radix_tree_tag_set(&mapping->page_tree,
page_index(page),
PAGECACHE_TAG_WRITEBACK);
- if (bdi_cap_account_writeback(bdi))
+ if (bdi_cap_account_writeback(bdi)) {
__inc_bdi_stat(bdi, BDI_WRITEBACK);
+ __inc_bdi_stat(bdi, BDI_WRITTEN_BACK);
+ }
}
if (!PageDirty(page))
radix_tree_tag_clear(&mapping->page_tree,
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>