[RFC Patch 0/2] mm: Add parameters to make kernel behavior at memory error on dirty cache selectable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi All,
Please find a patch set that introduces these new sysctl interfaces,
to handle a case when an memory error is detected on dirty page cache.

- vm.memory_failure_dirty_panic
- vm.memory_failure_print_ratelimit
- vm.memory_failure_print_ratelimit_burst

Problem
---------
Recently, it is common that enterprise servers likely have a large
amount of memory, especially for cloud environment. This means that
possibility of memory failures is increased.

To handle memory failure, Linux has a hwpoison feature. When a memory
error is detected by memory scrub, the error is reported as machine
check, uncorrected recoverable (UCR), to OS. Then OS isolates the memory
region with memory failure if the memory page can be isolated.
The hwpoison handles it according to the memory region, such as kernel,
dirty cache, clean cache. If the memory region can be isolated, the
page is marked "hwpoison" and it is not used again.

When SRAO machine check is reported on a page which is included dirty
page cache, the page is truncated because the memory is corrupted and
data of the page cannot be written to a disk any more.

As a result, if the dirty cache includes user data, the data is lost,
and data corruption occurs if an application uses old data.



Solution
---------
The patch proposes a new sysctl interface, vm.memory_failure_dirty_panic,
in order to prevent data corruption comes from data lost problem.
Also this patch displays information of affected file such as device name,
inode number, file offset and file type if the file is mapped on a memory
and the page is dirty cache.

When SRAO machine check occurs on a dirty page cache, corresponding
data cannot be recovered any more. Therefore, the patch proposes a kernel
option to keep a system running or force system panic in order
to avoid further trouble such as data corruption problem of application.

System administrator can select an error action using this option
according to characteristics of target system.



Use Case
---------
This option is intended to be adopted in KVM guest because it is
supposed that Linux on KVM guest operates customers business and
it is big impact to lost or corrupt customers data by memory failure.

On the other hand, this option does not recommend to apply KVM host
as following reasons.

- Making KVM host panic has a big impact because all virtual guests are
  affected by their host panic. Affected virtual guests are forced to stop
  and have to be restarted on the other hypervisor.

- If disk cached model of qemu is set to "none", I/O type of virtual
  guests becomes O_DIRECT and KVM host does not cache guest's disk I/O.
  Therefore, if SRAO machine check is reported on a dirty page cache
  in KVM host, its virtual machines are not affected by the machine check.
  So the host is expected to keep operating instead of kernel panic.


Past discussion
--------------------
This problem was previously discussed in the kernel community, 
(refer: mail threads pertaining to
http://marc.info/?l=linux-kernel&m=135187403804934&w=4). 

> > - I worry that if a hardware error occurs, it might affect a large
> >   amount of memory all at the same time.  For example, if a 4G memory
> >   block goes bad, this message will be printed a million times?


As Andrew mentioned in the above threads, if 4GB memory blocks goes bad,
error messages will be printed a million times and this behavior loses
a system reliability.

Therefore, the second patch introduces two sysctl parameters for
__ratelimit() which is used at mce_notify_irq() in order to notify
occurrence of machine check event to system administrator.
The use of __ratelimit(), this patch can limit quantity of messages
per interval to be output at syslog or terminal console.

If system administrator needs to limit quantity of messages,
these parameters are available.

- vm.memory_failure_print_ratelimit:
  Specifies the minimum length of time between messages.
  By default the rate limiting is disabled.

- vm.memory_failure_print_ratelimit_burst:
  Specifies the number of messages we can send before rate limiting.



Test Results
---------
These patches are tested on 3.8.1 kernel(FC18) using software pseudo MCE
injection from KVM host to guest.


******** Host OS Screen logs(SRAO Machine Check injection) ********
Inject software pseudo MCE into guest qemu process.

(1) Load mce-inject module
# modprobe mce-inject

(2) Find a PID of target qemu-kvm and page struct
# ps -C qemu-kvm -o pid=
 8176

(3) Edit software pseudo MCE data
Choose a offset of page struct and insert the offset to ADDR line in mce-file.

#  ./page-types -p 8176 -LN | grep "___UDlA____Ma_b___________________"
voffset         offset  flags
...
7fd25eb77       344d77  ___UDlA____Ma_b___________________
7fd25eb78       344d78  ___UDlA____Ma_b___________________
7fd25eb79       344d79  ___UDlA____Ma_b___________________
7fd25eb7a       344d7a  ___UDlA____Ma_b___________________
7fd25eb7b       344d7b  ___UDlA____Ma_b___________________
7fd25eb7c       344d7c  ___UDlA____Ma_b___________________
7fd25eb7d       344d7d  ___UDlA____Ma_b___________________
...

# vi mce-file
CPU 0 BANK 2
STATUS UNCORRECTED SRAO 0x17a
MCGSTATUS MCIP RIPV
MISC 0x8c
ADDR 0x344d77000
EOF

(4) Inject MCE
# mce-inject mce-file

Try step (3) to (4) a couple of times 




******** Guest OS Screen logs(kdump) ********
Receive MCE from KVM host

(1) Set vm.memory_failure_dirty_panic parameter to 1.

(2) When guest catches MCE injection from qemu and
    MCE hit dirty page cache, hwpoison dirty cache handler
    displays information of affected file such as Device name,
    Inode Number, Offset and File Type.
    And then, system goes a panic.

ex.
-------------
[root@host /]# sysctl -a | grep memory_failure
vm.memory_failure_dirty_panic = 1
vm.memory_failure_early_kill = 0
vm.memory_failure_recovery = 1
[root@host /]#
[  517.975220] MCE 0x326e6: clean LRU page recovery: Recovered
[  521.969218] MCE 0x34df8: clean LRU page recovery: Recovered
[  525.769171] MCE 0x37509: corrupted page was clean: dropped without side effects
[  525.771070] MCE 0x37509: clean LRU page recovery: Recovered
[  529.969246] MCE 0x39c18: File was corrupted: Dev:vda3 Inode:808998 Offset:6561
[  529.969995] Kernel panic - not syncing: MCE 0x39c18: Force a panic because of dirty page cache was corrupted : File type:0x81a4
[  529.969995]
[  529.970055] Pid: 245, comm: kworker/0:2 Tainted: G   M         3.8.1 #22
[  529.970055] Call Trace:
[  529.970055]  [<ffffffff81645d1e>] panic+0xc1/0x1d0
[  529.970055]  [<ffffffff811991fa>] me_pagecache_dirty+0xda/0x1a0
[  529.970055]  [<ffffffff8119a0ab>] memory_failure+0x4eb/0xca0
[  529.970055]  [<ffffffff8102f34d>] mce_process_work+0x3d/0x60
[  529.970055]  [<ffffffff8107a5f7>] process_one_work+0x147/0x490
[  529.970055]  [<ffffffff8102f310>] ? mce_schedule_work+0x50/0x50
[  529.970055]  [<ffffffff8107ce8e>] worker_thread+0x15e/0x450
[  529.970055]  [<ffffffff8107cd30>] ? busy_worker_rebind_fn+0x110/0x110
[  529.970055]  [<ffffffff81081f50>] kthread+0xc0/0xd0
[  529.970055]  [<ffffffff81010000>] ? ftrace_define_fields_xen_mc_entry+0xa0/0xf0
[  529.970055]  [<ffffffff81081e90>] ? kthread_create_on_node+0x120/0x120
[  529.970055]  [<ffffffff81657cec>] ret_from_fork+0x7c/0xb0
[  529.970055]  [<ffffffff81081e90>] ? kthread_create_on_node+0x120/0x120
-------------

(3) Case of a number of MCE occurs
If a number of MCE occurs during a minute, error messages are suppressed to output
by __ratelimit() with following message.

[  414.815303] me_pagecache_dirty: 3 callbacks suppressed

ex.
-------------
[root@host /]# sysctl -a | grep memory_failure
vm.memory_failure_dirty_panic = 0
vm.memory_failure_early_kill = 0
vm.memory_failure_print_ratelimit = 30
vm.memory_failure_print_ratelimit_burst = 2
vm.memory_failure_recovery = 1

[root@host /]#

[  181.565534] MCE 0xc38c: File was corrupted: Dev:vda3 Inode:808998 Offset:9566
[  181.566310] MCE 0xc38c: dirty LRU page recovery: Recovered
[  183.525425] MCE 0xc45a: Unknown page state
[  183.527225] MCE 0xc45a: unknown page state page recovery: Failed
[  183.527907] MCE 0xc45a: unknown page state page still referenced by -1 users
[  185.000329] MCE 0xc524: dirty LRU page recovery: Recovered
[  186.065231] MCE 0xc5ef: dirty LRU page recovery: Recovered
[  188.054096] MCE 0xc6ba: clean LRU page recovery: Recovered
[  189.565275] MCE 0xc783: clean LRU page recovery: Recovered
[  191.692628] MCE 0xc84c: clean LRU page recovery: Recovered
[  193.000257] MCE 0xc91d: File was corrupted: Dev:vda3 Inode:808998 Offset:6201
[  193.001222] MCE 0xc91d: dirty LRU page recovery: Recovered
[  194.065314] MCE 0xc9e6: dirty LRU page recovery: Recovered
[  195.711211] MCE 0xcaaf: clean LRU page recovery: Recovered
[  197.565339] MCE 0xcb78: dirty LRU page recovery: Recovered
[  200.054177] MCE 0xcc41: dirty LRU page recovery: Recovered
[  201.000272] MCE 0xcd0a: clean LRU page recovery: Recovered
[  204.054109] MCE 0xcdd3: clean LRU page recovery: Recovered
[  205.283189] MCE 0xcf65: clean LRU page recovery: Recovered
[  207.110339] MCE 0xd02f: Unknown page state
[  207.110787] MCE 0xd02f: unknown page state page recovery: Failed
[  207.111427] MCE 0xd02f: unknown page state page still referenced by -1 users
[  209.000134] MCE 0xd0f9: dirty LRU page recovery: Recovered
[  210.106360] MCE 0xd1c5: dirty LRU page recovery: Recovered
[  211.796333] me_pagecache_dirty: 3 callbacks suppressed
[  211.796961] MCE 0xd296: File was corrupted: Dev:vda3 Inode:808998 Offset:9320
[  211.798091] MCE 0xd296: dirty LRU page recovery: Recovered
[  213.565288] MCE 0xd35f: clean LRU page recovery: Recovered
-------------

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]