(4/8/13 3:50 PM), Cody P Schafer wrote:
> On 04/08/2013 10:28 AM, Cody P Schafer wrote:
>> On 04/08/2013 05:20 AM, Gilad Ben-Yossef wrote:
>>> On Fri, Apr 5, 2013 at 11:33 PM, Cody P Schafer
>>> <cody@xxxxxxxxxxxxxxxxxx> wrote:
>>>> In free_hot_cold_page(), we rely on pcp->batch remaining stable.
>>>> Updating it without being on the cpu owning the percpu pageset
>>>> potentially destroys this stability.
>>>>
>>>> Change for_each_cpu() to on_each_cpu() to fix.
>>>
>>> Are you referring to this? -
>>
>> This was the case I noticed.
>>
>>>
>>> 1329 if (pcp->count >= pcp->high) {
>>> 1330 free_pcppages_bulk(zone, pcp->batch, pcp);
>>> 1331 pcp->count -= pcp->batch;
>>> 1332 }
>>>
>>> I'm probably missing the obvious but won't it be simpler to do this in
>>> free_hot_cold_page() -
>>>
>>> 1329 if (pcp->count >= pcp->high) {
>>> 1330 unsigned int batch = ACCESS_ONCE(pcp->batch);
>>> 1331 free_pcppages_bulk(zone, batch, pcp);
>>> 1332 pcp->count -= batch;
>>> 1333 }
>>>
>>
>> Potentially, yes. Note that this was simply the one case I noticed,
>> rather than certainly the only case.
>>
>> I also wonder whether there could be unexpected interactions between
>> ->high and ->batch not changing together atomically. For example, could
>> adjusting this knob cause ->batch to rise enough that it is greater than
>> the previous ->high? If the code above then runs with the previous
>> ->high, ->count wouldn't be correct (checking this inside
>> free_pcppages_bulk() might help on this one issue).
>>
>>> Now the batch value used is stable and you don't have to IPI every CPU
>>> in the system just to change a config knob...
>>
>> Is this really considered an issue? I wouldn't have expected someone to
>> adjust the config knob often enough (or even more than once) to cause
>> problems. Of course as a "It'd be nice" thing, I completely agree.
>
> Would using schedule_on_each_cpu() instead of on_each_cpu() be an
> improvement, in your opinion?
No. As far as lightweight solusion work, we shouldn't introduce heavyweight
code never. on_each_cpu() is really heavy weight especially when number of
cpus are much than a thousand.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>