On Wed, Jan 09, 2013 at 02:32:56PM +1100, Benjamin Herrenschmidt wrote:
> Ok. I think at least you can move that construct:
>
> + if (addr < SLICE_LOW_TOP) {
> + slice = GET_LOW_SLICE_INDEX(addr);
> + addr = (slice + 1) << SLICE_LOW_SHIFT;
> + if (!(available.low_slices & (1u << slice)))
> + continue;
> + } else {
> + slice = GET_HIGH_SLICE_INDEX(addr);
> + addr = (slice + 1) << SLICE_HIGH_SHIFT;
> + if (!(available.high_slices & (1u << slice)))
> + continue;
> + }
>
> Into some kind of helper. It will probably compile to the same thing but
> at least it's more readable and it will avoid a fuckup in the future if
> somebody changes the algorithm and forgets to update one of the
> copies :-)
All right, does the following look more palatable then ?
(didn't re-test it, though)
Signed-off-by: Michel Lespinasse <walken@xxxxxxxxxx>
---
arch/powerpc/mm/slice.c | 123 ++++++++++++++++++++++++++++++-----------------
1 files changed, 78 insertions(+), 45 deletions(-)
diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index 999a74f25ebe..3e99c149271a 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -237,36 +237,69 @@ static void slice_convert(struct mm_struct *mm, struct slice_mask mask, int psiz
#endif
}
+/*
+ * Compute which slice addr is part of;
+ * set *boundary_addr to the start or end boundary of that slice
+ * (depending on 'end' parameter);
+ * return boolean indicating if the slice is marked as available in the
+ * 'available' slice_mark.
+ */
+static bool slice_scan_available(unsigned long addr,
+ struct slice_mask available,
+ int end,
+ unsigned long *boundary_addr)
+{
+ unsigned long slice;
+ if (addr < SLICE_LOW_TOP) {
+ slice = GET_LOW_SLICE_INDEX(addr);
+ *boundary_addr = (slice + end) << SLICE_LOW_SHIFT;
+ return !!(available.low_slices & (1u << slice));
+ } else {
+ slice = GET_HIGH_SLICE_INDEX(addr);
+ *boundary_addr = (slice + end) ?
+ ((slice + end) << SLICE_HIGH_SHIFT) : SLICE_LOW_TOP;
+ return !!(available.high_slices & (1u << slice));
+ }
+}
+
static unsigned long slice_find_area_bottomup(struct mm_struct *mm,
unsigned long len,
struct slice_mask available,
int psize)
{
- struct vm_area_struct *vma;
- unsigned long addr;
- struct slice_mask mask;
int pshift = max_t(int, mmu_psize_defs[psize].shift, PAGE_SHIFT);
+ unsigned long addr, found, next_end;
+ struct vm_unmapped_area_info info;
- addr = TASK_UNMAPPED_BASE;
-
- for (;;) {
- addr = _ALIGN_UP(addr, 1ul << pshift);
- if ((TASK_SIZE - len) < addr)
- break;
- vma = find_vma(mm, addr);
- BUG_ON(vma && (addr >= vma->vm_end));
+ info.flags = 0;
+ info.length = len;
+ info.align_mask = PAGE_MASK & ((1ul << pshift) - 1);
+ info.align_offset = 0;
- mask = slice_range_to_mask(addr, len);
- if (!slice_check_fit(mask, available)) {
- if (addr < SLICE_LOW_TOP)
- addr = _ALIGN_UP(addr + 1, 1ul << SLICE_LOW_SHIFT);
- else
- addr = _ALIGN_UP(addr + 1, 1ul << SLICE_HIGH_SHIFT);
+ addr = TASK_UNMAPPED_BASE;
+ while (addr < TASK_SIZE) {
+ info.low_limit = addr;
+ if (!slice_scan_available(addr, available, 1, &addr))
continue;
+
+ next_slice:
+ /*
+ * At this point [info.low_limit; addr) covers
+ * available slices only and ends at a slice boundary.
+ * Check if we need to reduce the range, or if we can
+ * extend it to cover the next available slice.
+ */
+ if (addr >= TASK_SIZE)
+ addr = TASK_SIZE;
+ else if (slice_scan_available(addr, available, 1, &next_end)) {
+ addr = next_end;
+ goto next_slice;
}
- if (!vma || addr + len <= vma->vm_start)
- return addr;
- addr = vma->vm_end;
+ info.high_limit = addr;
+
+ found = vm_unmapped_area(&info);
+ if (!(found & ~PAGE_MASK))
+ return found;
}
return -ENOMEM;
@@ -277,39 +310,39 @@ static unsigned long slice_find_area_topdown(struct mm_struct *mm,
struct slice_mask available,
int psize)
{
- struct vm_area_struct *vma;
- unsigned long addr;
- struct slice_mask mask;
int pshift = max_t(int, mmu_psize_defs[psize].shift, PAGE_SHIFT);
+ unsigned long addr, found, prev;
+ struct vm_unmapped_area_info info;
- addr = mm->mmap_base;
- while (addr > len) {
- /* Go down by chunk size */
- addr = _ALIGN_DOWN(addr - len, 1ul << pshift);
+ info.flags = VM_UNMAPPED_AREA_TOPDOWN;
+ info.length = len;
+ info.align_mask = PAGE_MASK & ((1ul << pshift) - 1);
+ info.align_offset = 0;
- /* Check for hit with different page size */
- mask = slice_range_to_mask(addr, len);
- if (!slice_check_fit(mask, available)) {
- if (addr < SLICE_LOW_TOP)
- addr = _ALIGN_DOWN(addr, 1ul << SLICE_LOW_SHIFT);
- else if (addr < (1ul << SLICE_HIGH_SHIFT))
- addr = SLICE_LOW_TOP;
- else
- addr = _ALIGN_DOWN(addr, 1ul << SLICE_HIGH_SHIFT);
+ addr = mm->mmap_base;
+ while (addr > PAGE_SIZE) {
+ info.high_limit = addr;
+ if (!slice_scan_available(addr - 1, available, 0, &addr))
continue;
- }
+ prev_slice:
/*
- * Lookup failure means no vma is above this address,
- * else if new region fits below vma->vm_start,
- * return with success:
+ * At this point [addr; info.high_limit) covers
+ * available slices only and starts at a slice boundary.
+ * Check if we need to reduce the range, or if we can
+ * extend it to cover the previous available slice.
*/
- vma = find_vma(mm, addr);
- if (!vma || (addr + len) <= vma->vm_start)
- return addr;
+ if (addr < PAGE_SIZE)
+ addr = PAGE_SIZE;
+ else if (slice_scan_available(addr - 1, available, 0, &prev)) {
+ addr = prev;
+ goto prev_slice;
+ }
+ info.low_limit = addr;
- /* try just below the current vma->vm_start */
- addr = vma->vm_start;
+ found = vm_unmapped_area(&info);
+ if (!(found & ~PAGE_MASK))
+ return found;
}
/*
--
Michel "Walken" Lespinasse
A program is never fully debugged until the last user dies.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>