On 2012/12/11 21:20, Simon Jeons wrote:
> On Tue, 2012-12-11 at 20:41 +0800, Jianguo Wu wrote:
>> On 2012/12/11 20:24, Simon Jeons wrote:
>>
>>> On Tue, 2012-12-11 at 11:07 +0800, Jianguo Wu wrote:
>>>> On 2012/12/11 10:33, Tang Chen wrote:
>>>>
>>>>> This patch introduces a new array zone_movable_limit[] to store the
>>>>> ZONE_MOVABLE limit from movablecore_map boot option for all nodes.
>>>>> The function sanitize_zone_movable_limit() will find out to which
>>>>> node the ranges in movable_map.map[] belongs, and calculates the
>>>>> low boundary of ZONE_MOVABLE for each node.
>>>>>
>>>>> Signed-off-by: Tang Chen <tangchen@xxxxxxxxxxxxxx>
>>>>> Signed-off-by: Jiang Liu <jiang.liu@xxxxxxxxxx>
>>>>> Reviewed-by: Wen Congyang <wency@xxxxxxxxxxxxxx>
>>>>> Reviewed-by: Lai Jiangshan <laijs@xxxxxxxxxxxxxx>
>>>>> Tested-by: Lin Feng <linfeng@xxxxxxxxxxxxxx>
>>>>> ---
>>>>> mm/page_alloc.c | 77 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>> 1 files changed, 77 insertions(+), 0 deletions(-)
>>>>>
>>>>> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
>>>>> index 1c91d16..4853619 100644
>>>>> --- a/mm/page_alloc.c
>>>>> +++ b/mm/page_alloc.c
>>>>> @@ -206,6 +206,7 @@ static unsigned long __meminitdata arch_zone_highest_possible_pfn[MAX_NR_ZONES];
>>>>> static unsigned long __initdata required_kernelcore;
>>>>> static unsigned long __initdata required_movablecore;
>>>>> static unsigned long __meminitdata zone_movable_pfn[MAX_NUMNODES];
>>>>> +static unsigned long __meminitdata zone_movable_limit[MAX_NUMNODES];
>>>>>
>>>>> /* movable_zone is the "real" zone pages in ZONE_MOVABLE are taken from */
>>>>> int movable_zone;
>>>>> @@ -4340,6 +4341,77 @@ static unsigned long __meminit zone_absent_pages_in_node(int nid,
>>>>> return __absent_pages_in_range(nid, zone_start_pfn, zone_end_pfn);
>>>>> }
>>>>>
>>>>> +/**
>>>>> + * sanitize_zone_movable_limit - Sanitize the zone_movable_limit array.
>>>>> + *
>>>>> + * zone_movable_limit is initialized as 0. This function will try to get
>>>>> + * the first ZONE_MOVABLE pfn of each node from movablecore_map, and
>>>>> + * assigne them to zone_movable_limit.
>>>>> + * zone_movable_limit[nid] == 0 means no limit for the node.
>>>>> + *
>>>>> + * Note: Each range is represented as [start_pfn, end_pfn)
>>>>> + */
>>>>> +static void __meminit sanitize_zone_movable_limit(void)
>>>>> +{
>>>>> + int map_pos = 0, i, nid;
>>>>> + unsigned long start_pfn, end_pfn;
>>>>> +
>>>>> + if (!movablecore_map.nr_map)
>>>>> + return;
>>>>> +
>>>>> + /* Iterate all ranges from minimum to maximum */
>>>>> + for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, &nid) {
>>>>> + /*
>>>>> + * If we have found lowest pfn of ZONE_MOVABLE of the node
>>>>> + * specified by user, just go on to check next range.
>>>>> + */
>>>>> + if (zone_movable_limit[nid])
>>>>> + continue;
>>>>> +
>>>>> +#ifdef CONFIG_ZONE_DMA
>>>>> + /* Skip DMA memory. */
>>>>> + if (start_pfn < arch_zone_highest_possible_pfn[ZONE_DMA])
>>>>> + start_pfn = arch_zone_highest_possible_pfn[ZONE_DMA];
>>>>> +#endif
>>>>> +
>>>>> +#ifdef CONFIG_ZONE_DMA32
>>>>> + /* Skip DMA32 memory. */
>>>>> + if (start_pfn < arch_zone_highest_possible_pfn[ZONE_DMA32])
>>>>> + start_pfn = arch_zone_highest_possible_pfn[ZONE_DMA32];
>>>>> +#endif
>>>>> +
>>>>> +#ifdef CONFIG_HIGHMEM
>>>>> + /* Skip lowmem if ZONE_MOVABLE is highmem. */
>>>>> + if (zone_movable_is_highmem() &&
>>>>
>>>> Hi Tang,
>>>>
>>>> I think zone_movable_is_highmem() is not work correctly here.
>>>> sanitize_zone_movable_limit
>>>> zone_movable_is_highmem <--using movable_zone here
>>>> find_zone_movable_pfns_for_nodes
>>>> find_usable_zone_for_movable <--movable_zone is specified here
>>>>
>>>
>>> Hi Jiangguo and Chen,
>>>
>>> - What's the meaning of zone_movable_is_highmem(), does it mean all zone
>>> highmem pages are zone movable pages or ....
>>
>> Hi Simon,
>>
>> zone_movable_is_highmem() means whether zone pages in ZONE_MOVABLE are taken from
>> highmem.
>>
>>> - dmesg
>>>
>>>> 0.000000] Zone ranges:
>>>> [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
>>>> [ 0.000000] Normal [mem 0x01000000-0x373fdfff]
>>>> [ 0.000000] HighMem [mem 0x373fe000-0xb6cfffff]
>>>> [ 0.000000] Movable zone start for each node
>>>> [ 0.000000] Node 0: 0x97800000
>>>
>>> Why the start of zone movable is in the range of zone highmem, if all
>>> the pages of zone movable are from zone highmem? If the answer is yes,
>>
>>> zone movable and zone highmem are in the equal status or not?
>>
>> The pages of zone_movable can be taken from zone_movalbe or zone_normal,
>> if we have highmem, then zone_movable will be taken from zone_highmem,
>> otherwise zone_movable will be taken from zone_normal.
>>
>> you can refer to find_usable_zone_for_movable().
>
> Hi Jiangguo,
>
> I have 8G memory, movablecore=5G, but dmesg looks strange, what
> happended to me?
>
Hi Simon,
I think you used 32bit kernel, and didn't enable CONFIG_X86_PAE, right?
So, it can only address memory below 4G.
Thanks,
Jianguo Wu
>> [ 0.000000] Zone ranges:
>> [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
>> [ 0.000000] Normal [mem 0x01000000-0x373fdfff]
>> [ 0.000000] HighMem [mem 0x373fe000-0xb6cfffff]
>> [ 0.000000] Movable zone start for each node
>> [ 0.000000] Node 0: 0xb7000000
>> [ 0.000000] Early memory node ranges
>> [ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
>> [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
>> [ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
>> [ 0.000000] node 0: [mem 0x40200000-0xb69cbfff]
>> [ 0.000000] node 0: [mem 0xb6a46000-0xb6a47fff]
>> [ 0.000000] node 0: [mem 0xb6b1c000-0xb6cfffff]
>> [ 0.000000] On node 0 totalpages: 748095
>> [ 0.000000] DMA zone: 32 pages used for memmap
>> [ 0.000000] DMA zone: 0 pages reserved
>> [ 0.000000] DMA zone: 3949 pages, LIFO batch:0
>> [ 0.000000] Normal zone: 1736 pages used for memmap
>> [ 0.000000] Normal zone: 219958 pages, LIFO batch:31
>> [ 0.000000] HighMem zone: 4083 pages used for memmap
>> [ 0.000000] HighMem zone: 517569 pages, LIFO batch:31
>> [ 0.000000] Movable zone: 768 pages, LIFO batch:0
>
>>
>> Thanks,
>> Jianguo Wu
>>
>>>
>>>> I think Jiang Liu's patch works fine for highmem, please refer to:
>>>> http://marc.info/?l=linux-mm&m=135476085816087&w=2
>>>>
>>>> Thanks,
>>>> Jianguo Wu
>>>>
>>>>> + start_pfn < arch_zone_lowest_possible_pfn[ZONE_HIGHMEM])
>>>>> + start_pfn = arch_zone_lowest_possible_pfn[ZONE_HIGHMEM];
>>>>> +#endif
>>>>> +
>>>>> + if (start_pfn >= end_pfn)
>>>>> + continue;
>>>>> +
>>>>> + while (map_pos < movablecore_map.nr_map) {
>>>>> + if (end_pfn <= movablecore_map.map[map_pos].start_pfn)
>>>>> + break;
>>>>> +
>>>>> + if (start_pfn >= movablecore_map.map[map_pos].end_pfn) {
>>>>> + map_pos++;
>>>>> + continue;
>>>>> + }
>>>>> +
>>>>> + /*
>>>>> + * The start_pfn of ZONE_MOVABLE is either the minimum
>>>>> + * pfn specified by movablecore_map, or 0, which means
>>>>> + * the node has no ZONE_MOVABLE.
>>>>> + */
>>>>> + zone_movable_limit[nid] = max(start_pfn,
>>>>> + movablecore_map.map[map_pos].start_pfn);
>>>>> +
>>>>> + break;
>>>>> + }
>>>>> + }
>>>>> +}
>>>>> +
>>>>> #else /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
>>>>> static inline unsigned long __meminit zone_spanned_pages_in_node(int nid,
>>>>> unsigned long zone_type,
>>>>> @@ -4358,6 +4430,10 @@ static inline unsigned long __meminit zone_absent_pages_in_node(int nid,
>>>>> return zholes_size[zone_type];
>>>>> }
>>>>>
>>>>> +static void __meminit sanitize_zone_movable_limit(void)
>>>>> +{
>>>>> +}
>>>>> +
>>>>> #endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
>>>>>
>>>>> static void __meminit calculate_node_totalpages(struct pglist_data *pgdat,
>>>>> @@ -4923,6 +4999,7 @@ void __init free_area_init_nodes(unsigned long *max_zone_pfn)
>>>>>
>>>>> /* Find the PFNs that ZONE_MOVABLE begins at in each node */
>>>>> memset(zone_movable_pfn, 0, sizeof(zone_movable_pfn));
>>>>> + sanitize_zone_movable_limit();
>>>>> find_zone_movable_pfns_for_nodes();
>>>>>
>>>>> /* Print out the zone ranges */
>>>>
>>>>
>>>>
>>>> --
>>>> To unsubscribe, send a message with 'unsubscribe linux-mm' in
>>>> the body to majordomo@xxxxxxxxx. For more info on Linux MM,
>>>> see: http://www.linux-mm.org/ .
>>>> Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>
>>>
>>>
>>>
>>> .
>>>
>>
>>
>>
>
>
>
> .
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>