Re: [PATCH 2/5] mm: frontswap: lazy initialization to allow tmem backends to build/run as modules

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Nov 3, 2012 at 2:27 AM, Konrad Rzeszutek Wilk
<konrad.wilk@xxxxxxxxxx> wrote:
> On Wed, Oct 31, 2012 at 12:05:32PM -0500, Seth Jennings wrote:
>> On 10/31/2012 10:07 AM, Dan Magenheimer wrote:
>> > With the goal of allowing tmem backends (zcache, ramster, Xen tmem) to be
>> > built/loaded as modules rather than built-in and enabled by a boot parameter,
>> > this patch provides "lazy initialization", allowing backends to register to
>> > frontswap even after swapon was run. Before a backend registers all calls
>> > to init are recorded and the creation of tmem_pools delayed until a backend
>> > registers or until a frontswap put is attempted.
>> >
>> > Signed-off-by: Stefan Hengelein <ilendir@xxxxxxxxxxxxxx>
>> > Signed-off-by: Florian Schmaus <fschmaus@xxxxxxxxx>
>> > Signed-off-by: Andor Daam <andor.daam@xxxxxxxxxxxxxx>
>> > Signed-off-by: Dan Magenheimer <dan.magenheimer@xxxxxxxxxx>
>> > ---
>> >  include/linux/frontswap.h |    1 +
>> >  mm/frontswap.c            |   70 +++++++++++++++++++++++++++++++++++++++-----
>> >  2 files changed, 63 insertions(+), 8 deletions(-)
>> >
>> > diff --git a/include/linux/frontswap.h b/include/linux/frontswap.h
>> > index 3044254..ef6ada6 100644
>> > --- a/include/linux/frontswap.h
>> > +++ b/include/linux/frontswap.h
>> > @@ -23,6 +23,7 @@ extern void frontswap_writethrough(bool);
>> >  extern void frontswap_tmem_exclusive_gets(bool);
>> >
>> >  extern void __frontswap_init(unsigned type);
>> > +#define FRONTSWAP_HAS_LAZY_INIT
>> >  extern int __frontswap_store(struct page *page);
>> >  extern int __frontswap_load(struct page *page);
>> >  extern void __frontswap_invalidate_page(unsigned, pgoff_t);
>> > diff --git a/mm/frontswap.c b/mm/frontswap.c
>> > index 2890e67..523a19b 100644
>> > --- a/mm/frontswap.c
>> > +++ b/mm/frontswap.c
>> > @@ -80,6 +80,19 @@ static inline void inc_frontswap_succ_stores(void) { }
>> >  static inline void inc_frontswap_failed_stores(void) { }
>> >  static inline void inc_frontswap_invalidates(void) { }
>> >  #endif
>> > +
>> > +/*
>> > + * When no backend is registered all calls to init are registered and
>> > + * remembered but fail to create tmem_pools. When a backend registers with
>> > + * frontswap the previous calls to init are executed to create tmem_pools
>> > + * and set the respective poolids.
>> > + * While no backend is registered all "puts", "gets" and "flushes" are
>> > + * ignored or fail.
>> > + */
>> > +#define MAX_INITIALIZABLE_SD 32
>>
>> MAX_INITIALIZABLE_SD should just be MAX_SWAPFILES
>>
>> > +static int sds[MAX_INITIALIZABLE_SD];
>>
>> Rather than store and array of enabled types indexed by type, why not
>> an array of booleans indexed by type.  Or a bitfield if you really
>> want to save space.
>>
>> > +static int backend_registered;
>>
>> (backend_registered) is equivalent to checking (frontswap_ops != NULL)
>> right?
>>
>> > +
>> >  /*
>> >   * Register operations for frontswap, returning previous thus allowing
>> >   * detection of multiple backends and possible nesting.
>> > @@ -87,9 +100,16 @@ static inline void inc_frontswap_invalidates(void) { }
>> >  struct frontswap_ops frontswap_register_ops(struct frontswap_ops *ops)
>> >  {
>> >     struct frontswap_ops old = frontswap_ops;
>> > +   int i;
>> >
>> >     frontswap_ops = *ops;
>> >     frontswap_enabled = true;
>> > +
>> > +   backend_registered = 1;
>> > +   for (i = 0; i < MAX_INITIALIZABLE_SD; i++) {
>> > +           if (sds[i] != -1)
>> > +                   (*frontswap_ops.init)(sds[i]);
>> > +   }
>> >     return old;
>> >  }
>> >  EXPORT_SYMBOL(frontswap_register_ops);
>> > @@ -122,7 +142,10 @@ void __frontswap_init(unsigned type)
>> >     BUG_ON(sis == NULL);
>> >     if (sis->frontswap_map == NULL)
>> >             return;
>> > -   frontswap_ops.init(type);
>> > +   if (backend_registered) {
>> > +           (*frontswap_ops.init)(type);
>> > +           sds[type] = type;
>>
>> This is weird, storing the type in an array indexed by type.  Hence my
>> suggestion above about an array of booleans or a bitfield.
>>
>> > +   }
>> >  }
>> >  EXPORT_SYMBOL(__frontswap_init);
>> >
>> > @@ -147,10 +170,20 @@ int __frontswap_store(struct page *page)
>> >     struct swap_info_struct *sis = swap_info[type];
>> >     pgoff_t offset = swp_offset(entry);
>> >
>> > +   if (!backend_registered) {
>> > +           inc_frontswap_failed_stores();
>> > +           return ret;
>> > +   }
>> > +
>> >     BUG_ON(!PageLocked(page));
>> >     BUG_ON(sis == NULL);
>> >     if (frontswap_test(sis, offset))
>> >             dup = 1;
>> > +   if (type < MAX_INITIALIZABLE_SD && sds[type] == -1) {
>> > +           /* lazy init call to handle post-boot insmod backends*/
>> > +           (*frontswap_ops.init)(type);
>> > +           sds[type] = type;
>> > +   }
>> >     ret = frontswap_ops.store(type, offset, page);
>> >     if (ret == 0) {
>> >             frontswap_set(sis, offset);
>> > @@ -186,6 +219,9 @@ int __frontswap_load(struct page *page)
>> >     struct swap_info_struct *sis = swap_info[type];
>> >     pgoff_t offset = swp_offset(entry);
>> >
>> > +   if (!backend_registered)
>> > +           return ret;
>> > +
>> >     BUG_ON(!PageLocked(page));
>> >     BUG_ON(sis == NULL);
>> >     if (frontswap_test(sis, offset))
>> > @@ -209,6 +245,9 @@ void __frontswap_invalidate_page(unsigned type, pgoff_t offset)
>> >  {
>> >     struct swap_info_struct *sis = swap_info[type];
>> >
>> > +   if (!backend_registered)
>> > +           return;
>> > +
>> >     BUG_ON(sis == NULL);
>> >     if (frontswap_test(sis, offset)) {
>> >             frontswap_ops.invalidate_page(type, offset);
>> > @@ -225,13 +264,23 @@ EXPORT_SYMBOL(__frontswap_invalidate_page);
>> >  void __frontswap_invalidate_area(unsigned type)
>> >  {
>> >     struct swap_info_struct *sis = swap_info[type];
>> > -
>> > -   BUG_ON(sis == NULL);
>> > -   if (sis->frontswap_map == NULL)
>> > -           return;
>> > -   frontswap_ops.invalidate_area(type);
>> > -   atomic_set(&sis->frontswap_pages, 0);
>> > -   memset(sis->frontswap_map, 0, sis->max / sizeof(long));
>> > +   int i;
>> > +
>> > +   if (backend_registered) {
>> > +           BUG_ON(sis == NULL);
>> > +           if (sis->frontswap_map == NULL)
>> > +                   return;
>> > +           (*frontswap_ops.invalidate_area)(type);
>> > +           atomic_set(&sis->frontswap_pages, 0);
>> > +           memset(sis->frontswap_map, 0, sis->max / sizeof(long));
>> > +   } else {
>> > +           for (i = 0; i < MAX_INITIALIZABLE_SD; i++) {
>> > +                   if (sds[i] == type) {
>>
>> Additional weirdness with sds.  It seems this whole for loop could
>> just be reduced to:
>>
>> sds[type] = -1;
>
>
> How does this look? (I hadn't actually tested it, but did compile test
> it)
>
> From f545530e9ef2b0623ab9e78d490595e3b7eaa3fa Mon Sep 17 00:00:00 2001
> From: Dan Magenheimer <dan.magenheimer@xxxxxxxxxx>
> Date: Wed, 31 Oct 2012 08:07:51 -0700
> Subject: [PATCH 2/2] mm: frontswap: lazy initialization to allow tmem
>  backends to build/run as modules
>
> With the goal of allowing tmem backends (zcache, ramster, Xen tmem) to be
> built/loaded as modules rather than built-in and enabled by a boot parameter,
> this patch provides "lazy initialization", allowing backends to register to
> frontswap even after swapon was run. Before a backend registers all calls
> to init are recorded and the creation of tmem_pools delayed until a backend
> registers or until a frontswap put is attempted.
>
> Signed-off-by: Stefan Hengelein <ilendir@xxxxxxxxxxxxxx>
> Signed-off-by: Florian Schmaus <fschmaus@xxxxxxxxx>
> Signed-off-by: Andor Daam <andor.daam@xxxxxxxxxxxxxx>
> Signed-off-by: Dan Magenheimer <dan.magenheimer@xxxxxxxxxx>
> [v1: Fixes per Seth Jennings suggestions]
> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
> ---
>  include/linux/frontswap.h |  1 +
>  mm/frontswap.c            | 59 +++++++++++++++++++++++++++++++++++++++++------
>  2 files changed, 53 insertions(+), 7 deletions(-)
>
> diff --git a/include/linux/frontswap.h b/include/linux/frontswap.h
> index 3044254..ef6ada6 100644
> --- a/include/linux/frontswap.h
> +++ b/include/linux/frontswap.h
> @@ -23,6 +23,7 @@ extern void frontswap_writethrough(bool);
>  extern void frontswap_tmem_exclusive_gets(bool);
>
>  extern void __frontswap_init(unsigned type);
> +#define FRONTSWAP_HAS_LAZY_INIT
>  extern int __frontswap_store(struct page *page);
>  extern int __frontswap_load(struct page *page);
>  extern void __frontswap_invalidate_page(unsigned, pgoff_t);
> diff --git a/mm/frontswap.c b/mm/frontswap.c
> index 2890e67..4e04549 100644
> --- a/mm/frontswap.c
> +++ b/mm/frontswap.c
> @@ -80,6 +80,18 @@ static inline void inc_frontswap_succ_stores(void) { }
>  static inline void inc_frontswap_failed_stores(void) { }
>  static inline void inc_frontswap_invalidates(void) { }
>  #endif
> +
> +/*
> + * When no backend is registered all calls to init are registered and
> + * remembered but fail to create tmem_pools. When a backend registers with
> + * frontswap the previous calls to init are executed to create tmem_pools
> + * and set the respective poolids.
> + * While no backend is registered all "puts", "gets" and "flushes" are
> + * ignored or fail.
> + */
> +static DECLARE_BITMAP(sds, MAX_SWAPFILES);
> +static bool backend_registered __read_mostly;
> +

Yes, i also prefer to use bitmap and resue MAX_SWAPFILES.

>  /*
>   * Register operations for frontswap, returning previous thus allowing
>   * detection of multiple backends and possible nesting.
> @@ -87,9 +99,16 @@ static inline void inc_frontswap_invalidates(void) { }
>  struct frontswap_ops frontswap_register_ops(struct frontswap_ops *ops)
>  {
>         struct frontswap_ops old = frontswap_ops;
> +       int i;
>
>         frontswap_ops = *ops;
>         frontswap_enabled = true;
> +
> +       backend_registered = true;
> +       for (i = 0; i < MAX_SWAPFILES; i++) {
> +               if (test_bit(i, sds))
> +                       (*frontswap_ops.init)(sds[i]);
> +       }
>         return old;
>  }
>  EXPORT_SYMBOL(frontswap_register_ops);
> @@ -122,7 +141,10 @@ void __frontswap_init(unsigned type)
>         BUG_ON(sis == NULL);
>         if (sis->frontswap_map == NULL)
>                 return;
> -       frontswap_ops.init(type);
> +       if (backend_registered) {
> +               (*frontswap_ops.init)(type);
> +               set_bit(type, sds);
> +       }
>  }

What about set bit if backend not registered and clear bit when invalidate.
I think that looks more directly.
Like:
+       if (backend_registered) {
+               BUG_ON(sis == NULL);
+               if (sis->frontswap_map == NULL)
+                       return;
+               frontswap_ops.init(type);
+       }
+       else {
+               BUG_ON(type > MAX_SWAPFILES);
+                set_bit(type, sds);
+       }


>  EXPORT_SYMBOL(__frontswap_init);
>
> @@ -147,10 +169,20 @@ int __frontswap_store(struct page *page)
>         struct swap_info_struct *sis = swap_info[type];
>         pgoff_t offset = swp_offset(entry);
>
> +       if (!backend_registered) {
> +               inc_frontswap_failed_stores();
> +               return ret;
> +       }
> +
>         BUG_ON(!PageLocked(page));
>         BUG_ON(sis == NULL);
>         if (frontswap_test(sis, offset))
>                 dup = 1;
> +       if (type < MAX_SWAPFILES && !test_bit(type, sds)) {
> +               /* lazy init call to handle post-boot insmod backends*/
> +               (*frontswap_ops.init)(type);
> +               set_bit(type, sds);
> +       }

Then rm this.

>         ret = frontswap_ops.store(type, offset, page);
>         if (ret == 0) {
>                 frontswap_set(sis, offset);
> @@ -186,6 +218,9 @@ int __frontswap_load(struct page *page)
>         struct swap_info_struct *sis = swap_info[type];
>         pgoff_t offset = swp_offset(entry);
>
> +       if (!backend_registered)
> +               return ret;
> +
>         BUG_ON(!PageLocked(page));
>         BUG_ON(sis == NULL);
>         if (frontswap_test(sis, offset))
> @@ -209,6 +244,9 @@ void __frontswap_invalidate_page(unsigned type, pgoff_t offset)
>  {
>         struct swap_info_struct *sis = swap_info[type];
>
> +       if (!backend_registered)
> +               return;
> +

I'm not sure whether __frontswap_invalidate_page() will be called if
backend not registered.

>         BUG_ON(sis == NULL);
>         if (frontswap_test(sis, offset)) {
>                 frontswap_ops.invalidate_page(type, offset);
> @@ -226,12 +264,16 @@ void __frontswap_invalidate_area(unsigned type)
>  {
>         struct swap_info_struct *sis = swap_info[type];
>
> -       BUG_ON(sis == NULL);
> -       if (sis->frontswap_map == NULL)
> -               return;
> -       frontswap_ops.invalidate_area(type);
> -       atomic_set(&sis->frontswap_pages, 0);
> -       memset(sis->frontswap_map, 0, sis->max / sizeof(long));
> +       if (backend_registered) {
> +               BUG_ON(sis == NULL);
> +               if (sis->frontswap_map == NULL)
> +                       return;
> +               (*frontswap_ops.invalidate_area)(type);
> +               atomic_set(&sis->frontswap_pages, 0);
> +               memset(sis->frontswap_map, 0, sis->max / sizeof(long));
> +       } else {
> +               bitmap_zero(sds, MAX_SWAPFILES);

Use clear_bit(type, sds) here;

> +       }
>  }
>  EXPORT_SYMBOL(__frontswap_invalidate_area);
>
> @@ -364,6 +406,9 @@ static int __init init_frontswap(void)
>         debugfs_create_u64("invalidates", S_IRUGO,
>                                 root, &frontswap_invalidates);
>  #endif
> +       bitmap_zero(sds, MAX_SWAPFILES);
> +
> +       frontswap_enabled = 1;

We'd  better  init backend_registered = false also.

>         return 0;
>  }
>
> --
> 1.7.11.7
>
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@xxxxxxxxx.  For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>

-- 
Thanks,
--Bob

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]