On Tue 18-09-12 18:04:01, Glauber Costa wrote:
> This patch adds the basic infrastructure for the accounting of the slab
> caches. To control that, the following files are created:
>
> * memory.kmem.usage_in_bytes
> * memory.kmem.limit_in_bytes
> * memory.kmem.failcnt
> * memory.kmem.max_usage_in_bytes
>
> They have the same meaning of their user memory counterparts. They
> reflect the state of the "kmem" res_counter.
> The code is not enabled until a limit is set.
"Per cgroup slab memory accounting is not enabled until a limit is set
for the group. Once the limit is set the accounting cannot be disabled
such a group."
Better?
> This can be tested by the flag "kmem_accounted".
Sounds as if it could be done from userspace (because you were talking
about an user interface) which it cannot and we do not see it in this
patch because it is not used anywhere. So please be more specific.
> This means that after the patch is applied, no behavioral changes
> exists for whoever is still using memcg to control their memory usage.
>
> We always account to both user and kernel resource_counters.
This is in contradiction with your claim that there is no behavioral
change for memcg users. Please clarify when we use u and when u+k
accounting.
"
There is no behavioral change if the kmem accounting is turned off for
memcg users but when there is a kmem.limit_in_bytes is set then the
memory.usage_in_bytes will include both user and kmem memory.
"
> This
> effectively means that an independent kernel limit is in place when the
> limit is set to a lower value than the user memory. A equal or higher
> value means that the user limit will always hit first, meaning that kmem
> is effectively unlimited.
>
> People who want to track kernel memory but not limit it, can set this
> limit to a very high number (like RESOURCE_MAX - 1page - that no one
> will ever hit, or equal to the user memory)
>
> Signed-off-by: Glauber Costa <glommer@xxxxxxxxxxxxx>
> CC: Michal Hocko <mhocko@xxxxxxx>
> CC: Johannes Weiner <hannes@xxxxxxxxxxx>
> Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@xxxxxxxxxxxxxx>
> ---
> mm/memcontrol.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 63 insertions(+), 1 deletion(-)
>
> diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> index d6ad138..f3fd354 100644
> --- a/mm/memcontrol.c
> +++ b/mm/memcontrol.c
> @@ -265,6 +265,10 @@ struct mem_cgroup {
> };
>
> /*
> + * the counter to account for kernel memory usage.
> + */
> + struct res_counter kmem;
> + /*
> * Per cgroup active and inactive list, similar to the
> * per zone LRU lists.
> */
> @@ -279,6 +283,7 @@ struct mem_cgroup {
> * Should the accounting and control be hierarchical, per subtree?
> */
> bool use_hierarchy;
> + bool kmem_accounted;
>
> bool oom_lock;
> atomic_t under_oom;
> @@ -389,6 +394,7 @@ enum res_type {
> _MEM,
> _MEMSWAP,
> _OOM_TYPE,
> + _KMEM,
> };
>
> #define MEMFILE_PRIVATE(x, val) ((x) << 16 | (val))
> @@ -1439,6 +1445,10 @@ done:
> res_counter_read_u64(&memcg->memsw, RES_USAGE) >> 10,
> res_counter_read_u64(&memcg->memsw, RES_LIMIT) >> 10,
> res_counter_read_u64(&memcg->memsw, RES_FAILCNT));
> + printk(KERN_INFO "kmem: usage %llukB, limit %llukB, failcnt %llu\n",
> + res_counter_read_u64(&memcg->kmem, RES_USAGE) >> 10,
> + res_counter_read_u64(&memcg->kmem, RES_LIMIT) >> 10,
> + res_counter_read_u64(&memcg->kmem, RES_FAILCNT));
> }
>
> /*
> @@ -3946,6 +3956,9 @@ static ssize_t mem_cgroup_read(struct cgroup *cont, struct cftype *cft,
> else
> val = res_counter_read_u64(&memcg->memsw, name);
> break;
> + case _KMEM:
> + val = res_counter_read_u64(&memcg->kmem, name);
> + break;
> default:
> BUG();
> }
> @@ -3984,8 +3997,18 @@ static int mem_cgroup_write(struct cgroup *cont, struct cftype *cft,
> break;
> if (type == _MEM)
> ret = mem_cgroup_resize_limit(memcg, val);
> - else
> + else if (type == _MEMSWAP)
> ret = mem_cgroup_resize_memsw_limit(memcg, val);
> + else if (type == _KMEM) {
> + ret = res_counter_set_limit(&memcg->kmem, val);
> + if (ret)
> + break;
> +
> + /* For simplicity, we won't allow this to be disabled */
> + if (!memcg->kmem_accounted && val != RESOURCE_MAX)
> + memcg->kmem_accounted = true;
> + } else
> + return -EINVAL;
> break;
> case RES_SOFT_LIMIT:
> ret = res_counter_memparse_write_strategy(buffer, &val);
> @@ -4051,12 +4074,16 @@ static int mem_cgroup_reset(struct cgroup *cont, unsigned int event)
> case RES_MAX_USAGE:
> if (type == _MEM)
> res_counter_reset_max(&memcg->res);
> + else if (type == _KMEM)
> + res_counter_reset_max(&memcg->kmem);
> else
> res_counter_reset_max(&memcg->memsw);
> break;
> case RES_FAILCNT:
> if (type == _MEM)
> res_counter_reset_failcnt(&memcg->res);
> + else if (type == _KMEM)
> + res_counter_reset_failcnt(&memcg->kmem);
> else
> res_counter_reset_failcnt(&memcg->memsw);
> break;
> @@ -4618,6 +4645,33 @@ static int mem_cgroup_oom_control_write(struct cgroup *cgrp,
> }
>
> #ifdef CONFIG_MEMCG_KMEM
Some things are guarded CONFIG_MEMCG_KMEM but some are not (e.g. struct
mem_cgroup.kmem). I do understand you want to keep ifdefs on the leash
but we should clean this up one day.
> +static struct cftype kmem_cgroup_files[] = {
> + {
> + .name = "kmem.limit_in_bytes",
> + .private = MEMFILE_PRIVATE(_KMEM, RES_LIMIT),
> + .write_string = mem_cgroup_write,
> + .read = mem_cgroup_read,
> + },
> + {
> + .name = "kmem.usage_in_bytes",
> + .private = MEMFILE_PRIVATE(_KMEM, RES_USAGE),
> + .read = mem_cgroup_read,
> + },
> + {
> + .name = "kmem.failcnt",
> + .private = MEMFILE_PRIVATE(_KMEM, RES_FAILCNT),
> + .trigger = mem_cgroup_reset,
> + .read = mem_cgroup_read,
> + },
> + {
> + .name = "kmem.max_usage_in_bytes",
> + .private = MEMFILE_PRIVATE(_KMEM, RES_MAX_USAGE),
> + .trigger = mem_cgroup_reset,
> + .read = mem_cgroup_read,
> + },
> + {},
> +};
> +
> static int memcg_init_kmem(struct mem_cgroup *memcg, struct cgroup_subsys *ss)
> {
> return mem_cgroup_sockets_init(memcg, ss);
> @@ -4961,6 +5015,12 @@ mem_cgroup_create(struct cgroup *cont)
> int cpu;
> enable_swap_cgroup();
> parent = NULL;
> +
> +#ifdef CONFIG_MEMCG_KMEM
> + WARN_ON(cgroup_add_cftypes(&mem_cgroup_subsys,
> + kmem_cgroup_files));
> +#endif
> +
> if (mem_cgroup_soft_limit_tree_init())
> goto free_out;
> root_mem_cgroup = memcg;
> @@ -4979,6 +5039,7 @@ mem_cgroup_create(struct cgroup *cont)
> if (parent && parent->use_hierarchy) {
> res_counter_init(&memcg->res, &parent->res);
> res_counter_init(&memcg->memsw, &parent->memsw);
> + res_counter_init(&memcg->kmem, &parent->kmem);
Haven't we already discussed that a new memcg should inherit kmem_accounted
from its parent for use_hierarchy?
Say we have
root
|
A (kmem_accounted = 1, use_hierachy = 1)
\
B (kmem_accounted = 0)
\
C (kmem_accounted = 1)
B find's itself in an awkward situation becuase it doesn't want to
account u+k but it ends up doing so becuase C.
--
Michal Hocko
SUSE Labs
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>