Adding linux-mm.
Btw, this is how you do bug reports! Good job.
On Thu, Sep 20, 2012 at 07:06:04PM +0200, Péter András Felvégi wrote:
> Hello,
>
> my machine hung today after some serious disk trashing caused by out
> of memory contition(s).
>
> I didn't do anything unusual. There was an xtem window with a few
> tabs, iceweasel/firefox, chromium and codelite running. I already
> worked for some hours, started a build, then in the middle of it, the
> disk (sdb, where the 2G swap partition is) started working real
> intesively. This was unlikely, because the system and my home dir is
> on ssd / btrfs (sda) for a few months now, so normally things go
> quietly.
>
> The system started struggling, the mouse moved really slow, pressing
> the num-lock and seeing the results on the led had quite some lag
> (3-14 secs). Tried to switch back to console via ctrl-alt-f1, after
> quite a few seconds it did switch, where I saw an oops regarding some
> btrfs extent function.
>
> Switched back to X, took a few minutes to get back the title/border of
> the topmost window. Meanwhile, 3 small windows appeared slowly (the
> disk was still trashing like hell) notifying about an oops, and
> waiting for action. The mouse moved pixel-by-pixel, was useless. Then,
> after about 15 minutes, the disk stopped working, and silence set in.
> Num-lock and the kb in general wasn't responding, nor the mouse. Tried
> to unplug the kb and plug in an usb one, but no luck. Tried to ping
> the machine, it was unreachable. After a few minutes I pulled the
> plug. At reboot, I was informed about some orphaned inodes, but that
> was all, the system is up and running since then.
>
> I don't know what triggered the swapping. From the logs it seems that
> the chromium processes were the first victims, but I wasn't using the
> browser, I was compiling my project. I haven't experienced any similar
> behaviour recently. I had plenty of free space on the btrfs partition
> (22G used out of 200G). I attached the relevant part from the kern.log
> (starting from the first oom and ending at the reboot), also I'm
> providing the info required for bug reports, hope that helps.
>
> Kind regards, Peter
>
>
> $ sh scripts/ver_linux
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux lobster 3.5.3 #10 SMP Thu Sep 6 12:25:33 CEST 2012 x86_64 GNU/Linux
>
> Gnu C 4.7
> Gnu make 3.81
> binutils 2.22
> util-linux scripts/ver_linux: 23: scripts/ver_linux:
> fdformat: not found
> mount support
> module-init-tools found
> Linux C Library 2.13
> Dynamic linker (ldd) 2.13
> Procps 3.3.3
> Kbd 1.15.3
> Sh-utils 8.13
> Modules Loaded snd_hda_codec_realtek snd_hda_intel
> snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm
> snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq
> crc32c_intel ghash_clmulni_intel snd_seq_device aesni_intel snd_timer
> aes_x86_64 snd k10temp fam15h_power aes_generic cryptd edac_mce_amd
> edac_core nouveau soundcore video i2c_piix4 mxm_wmi drm_kms_helper ttm
> evdev wmi usbhid r8169 mii
>
> $ cat /proc/cpuinfo
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 21
> model : 1
> model name : AMD FX(tm)-8120 Eight-Core Processor
> stepping : 2
> microcode : 0x6000626
> cpu MHz : 3624.392
> cache size : 2048 KB
> physical id : 0
> siblings : 8
> core id : 0
> cpu cores : 4
> apicid : 0
> initial apicid : 0
> fpu : yes
> fpu_exception : yes
> cpuid level : 13
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
> pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid
> aperfmperf pni pclmulqdq monitor ssse3 cx16 sse4_1 sse4_2 popcnt aes
> xsave avx lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a
> misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 nodeid_msr
> topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save
> tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold
> bogomips : 7248.78
> TLB size : 1536 4K pages
> clflush size : 64
> cache_alignment : 64
> address sizes : 48 bits physical, 48 bits virtual
> power management: ts ttp tm 100mhzsteps hwpstate cpb
>
> [7 other cores omitted]
>
> $ cat /proc/modules
> snd_hda_codec_realtek 67064 1 - Live 0xffffffffa016c000
> snd_hda_intel 30220 4 - Live 0xffffffffa0289000
> snd_hda_codec 90583 2 snd_hda_codec_realtek,snd_hda_intel, Live
> 0xffffffffa0264000
> snd_hwdep 13148 1 snd_hda_codec, Live 0xffffffffa0248000
> snd_pcm_oss 44847 0 - Live 0xffffffffa0258000
> snd_mixer_oss 22044 3 snd_pcm_oss, Live 0xffffffffa024d000
> snd_pcm 75438 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss, Live 0xffffffffa022f000
> snd_page_alloc 17065 2 snd_hda_intel,snd_pcm, Live 0xffffffffa0212000
> snd_seq_midi 12848 0 - Live 0xffffffffa0226000
> snd_seq_midi_event 13316 1 snd_seq_midi, Live 0xffffffffa01fa000
> snd_rawmidi 26914 1 snd_seq_midi, Live 0xffffffffa021e000
> snd_seq 52897 2 snd_seq_midi,snd_seq_midi_event, Live 0xffffffffa0204000
> crc32c_intel 12747 0 - Live 0xffffffffa0219000
> ghash_clmulni_intel 12981 0 - Live 0xffffffffa01ff000
> snd_seq_device 13132 3 snd_seq_midi,snd_rawmidi,snd_seq, Live 0xffffffffa01e7000
> aesni_intel 50435 0 - Live 0xffffffffa01ec000
> snd_timer 26606 2 snd_pcm,snd_seq, Live 0xffffffffa01df000
> aes_x86_64 16796 1 aesni_intel, Live 0xffffffffa01d9000
> snd 60845 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_seq_device,snd_timer,
> Live 0xffffffffa01c9000
> k10temp 12618 0 - Live 0xffffffffa01c4000
> fam15h_power 12597 0 - Live 0xffffffffa01bf000
> aes_generic 33026 2 aesni_intel,aes_x86_64, Live 0xffffffffa01ac000
> cryptd 14560 2 ghash_clmulni_intel,aesni_intel, Live 0xffffffffa0067000
> edac_mce_amd 21093 0 - Live 0xffffffffa0165000
> edac_core 43036 0 - Live 0xffffffffa0159000
> nouveau 843331 2 - Live 0xffffffffa006c000
> soundcore 13026 3 snd, Live 0xffffffffa0154000
> video 17631 1 nouveau, Live 0xffffffffa0061000
> i2c_piix4 12536 0 - Live 0xffffffffa0017000
> mxm_wmi 12473 1 nouveau, Live 0xffffffffa004d000
> drm_kms_helper 35294 1 nouveau, Live 0xffffffffa0057000
> ttm 61344 1 nouveau, Live 0xffffffffa003d000
> evdev 17406 15 - Live 0xffffffffa0029000
> wmi 17339 2 nouveau,mxm_wmi, Live 0xffffffffa0033000
> usbhid 44463 0 - Live 0xffffffffa001d000
> r8169 58988 0 - Live 0xffffffffa0007000
> mii 12675 1 r8169, Live 0xffffffffa0000000
>
> $ cat /proc/ioports
> 0000-0cf7 : PCI Bus 0000:00
> 0000-001f : dma1
> 0020-0021 : pic1
> 0040-0043 : timer0
> 0050-0053 : timer1
> 0060-0060 : keyboard
> 0064-0064 : keyboard
> 0070-0073 : rtc0
> 0080-008f : dma page reg
> 00a0-00a1 : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0220-0225 : pnp 00:01
> 0228-022f : pnp 00:02
> 0290-0294 : pnp 00:01
> 03c0-03df : vga+
> 03f8-03ff : serial
> 040b-040b : pnp 00:02
> 04d0-04d1 : pnp 00:01
> 04d6-04d6 : pnp 00:02
> 0800-08fe : pnp 00:02
> 0800-0803 : ACPI PM1a_EVT_BLK
> 0804-0805 : ACPI PM1a_CNT_BLK
> 0808-080b : ACPI PM_TMR
> 0810-0815 : ACPI CPU throttle
> 0820-0827 : ACPI GPE0_BLK
> 0850-0850 : ACPI PM2_CNT_BLK
> 0900-091f : pnp 00:02
> 0a10-0a17 : pnp 00:02
> 0b00-0b0f : pnp 00:02
> 0b10-0b1f : pnp 00:02
> 0b20-0b3f : pnp 00:02
> 0c00-0c01 : pnp 00:02
> 0c14-0c14 : pnp 00:02
> 0c50-0c52 : pnp 00:02
> 0c6c-0c6d : pnp 00:02
> 0c6f-0c6f : pnp 00:02
> 0cd0-0cd1 : pnp 00:02
> 0cd2-0cd3 : pnp 00:02
> 0cd4-0cdf : pnp 00:02
> 0cf8-0cff : PCI conf1
> 0d00-ffff : PCI Bus 0000:00
> 9000-9fff : PCI Bus 0000:06
> a000-afff : PCI Bus 0000:05
> af00-af7f : 0000:05:0e.0
> b000-bfff : PCI Bus 0000:01
> c000-cfff : PCI Bus 0000:04
> d000-dfff : PCI Bus 0000:03
> de00-deff : 0000:03:00.0
> de00-deff : r8169
> e000-efff : PCI Bus 0000:02
> fb00-fb0f : 0000:00:11.0
> fb00-fb0f : ahci
> fc00-fc03 : 0000:00:11.0
> fc00-fc03 : ahci
> fd00-fd07 : 0000:00:11.0
> fd00-fd07 : ahci
> fe00-fe03 : 0000:00:11.0
> fe00-fe03 : ahci
> ff00-ff07 : 0000:00:11.0
> ff00-ff07 : ahci
>
> $ cat /proc/iomem
> 00000000-0000ffff : reserved
> 00010000-00091fff : System RAM
> 00092000-0009f7ff : RAM buffer
> 0009f800-0009ffff : reserved
> 000a0000-000bffff : PCI Bus 0000:00
> 000c0000-000dffff : PCI Bus 0000:00
> 000c0000-000c7fff : Video ROM
> 000f0000-000fffff : reserved
> 000f0000-000fffff : System ROM
> 00100000-cfd9ffff : System RAM
> 01000000-01613166 : Kernel code
> 01613167-01872b7f : Kernel data
> 01902000-0198efff : Kernel bss
> c4000000-c7ffffff : GART
> cfda0000-cfdd0fff : ACPI Non-volatile Storage
> cfdd1000-cfdfffff : ACPI Tables
> cfe00000-cfefffff : reserved
> cfe00000-cfefffff : pnp 00:0b
> cff00000-cfffffff : RAM buffer
> d0000000-febfffff : PCI Bus 0000:00
> d0000000-dfffffff : PCI Bus 0000:01
> d0000000-dfffffff : 0000:01:00.0
> e0000000-efffffff : PCI MMCONFIG 0000 [bus 00-ff]
> e0000000-efffffff : reserved
> e0000000-efffffff : pnp 00:0a
> fa000000-fcffffff : PCI Bus 0000:01
> fa000000-faffffff : 0000:01:00.0
> fb000000-fbffffff : 0000:01:00.0
> fc000000-fc01ffff : 0000:01:00.0
> fd500000-fd5fffff : PCI Bus 0000:03
> fd600000-fd6fffff : PCI Bus 0000:02
> fd700000-fd7fffff : PCI Bus 0000:06
> fd800000-fd8fffff : PCI Bus 0000:06
> fd900000-fd9fffff : PCI Bus 0000:02
> fd9f8000-fd9fffff : 0000:02:00.0
> fd9f8000-fd9fffff : xhci_hcd
> fda00000-fdafffff : PCI Bus 0000:05
> fdb00000-fdbfffff : PCI Bus 0000:05
> fdbff000-fdbff7ff : 0000:05:0e.0
> fdc00000-fdcfffff : PCI Bus 0000:04
> fdd00000-fddfffff : PCI Bus 0000:04
> fddf8000-fddfffff : 0000:04:00.0
> fddf8000-fddfffff : xhci_hcd
> fde00000-fdefffff : PCI Bus 0000:03
> fdef8000-fdefbfff : 0000:03:00.0
> fdef8000-fdefbfff : r8169
> fdeff000-fdefffff : 0000:03:00.0
> fdeff000-fdefffff : r8169
> fdff4000-fdff7fff : 0000:00:14.2
> fdff4000-fdff7fff : ICH HD audio
> fdff8000-fdff80ff : 0000:00:16.2
> fdff8000-fdff80ff : ehci_hcd
> fdff9000-fdff9fff : 0000:00:16.0
> fdff9000-fdff9fff : ohci_hcd
> fdffa000-fdffafff : 0000:00:14.5
> fdffa000-fdffafff : ohci_hcd
> fdffb000-fdffb0ff : 0000:00:13.2
> fdffb000-fdffb0ff : ehci_hcd
> fdffc000-fdffcfff : 0000:00:13.0
> fdffc000-fdffcfff : ohci_hcd
> fdffd000-fdffd0ff : 0000:00:12.2
> fdffd000-fdffd0ff : ehci_hcd
> fdffe000-fdffefff : 0000:00:12.0
> fdffe000-fdffefff : ohci_hcd
> fdfff000-fdfff3ff : 0000:00:11.0
> fdfff000-fdfff3ff : ahci
> fec00000-ffffffff : reserved
> fec00000-fec003ff : IOAPIC 0
> fec30000-fec33fff : amd_iommu
> fed00000-fed003ff : HPET 0
> fed40000-fed44fff : PCI Bus 0000:00
> fee00000-fee00fff : Local APIC
> fee00400-fee00fff : pnp 00:02
> fff80000-fffeffff : pnp 00:0b
> ffff0000-ffffffff : pnp 00:0b
> 100000000-22effffff : System RAM
> 22f000000-22fffffff : RAM buffer
>
> # lspci -vvv
> 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to
> PCI bridge (external gfx0 port B) (rev 02)
> Subsystem: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI
> bridge (external gfx0 port B)
> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Region 3: Memory at <ignored> (64-bit, non-prefetchable)
> Capabilities: [f0] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [c4] HyperTransport: Slave or Primary Interface
> Command: BaseUnitID=0 UnitCnt=20 MastHost- DefDir- DUL-
> Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
> IsocEn- LSEn- ExtCTL- 64b-
> Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=8bit
> DwFcInEn- LWO=8bit DwFcOutEn-
> Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
> IsocEn- LSEn- ExtCTL- 64b-
> Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit
> DwFcInEn- LWO=8bit DwFcOutEn-
> Revision ID: 3.00
> Link Frequency 0: [d]
> Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+
> 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD-
> Link Frequency 1: 200MHz
> Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz-
> 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF-
> RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
> Prefetchable memory behind bridge Upper: 00-00
> Bus Number: 00
> Capabilities: [40] HyperTransport: Retry Mode
> Capabilities: [54] HyperTransport: UnitID Clumping
> Capabilities: [9c] HyperTransport: #1a
> Capabilities: [70] MSI: Enable- Count=1/4 Maskable- 64bit-
> Address: 00000000 Data: 0000
>
> 00:00.2 IOMMU: Advanced Micro Devices [AMD] nee ATI RD990 I/O Memory
> Management Unit (IOMMU)
> Subsystem: Advanced Micro Devices [AMD] nee ATI RD990 I/O Memory
> Management Unit (IOMMU)
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx+
> Interrupt: pin A routed to IRQ 40
> Capabilities: [40] Secure device <?>
> Capabilities: [54] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Address: 00000000feeff00c Data: 4151
> Capabilities: [64] HyperTransport: MSI Mapping Enable+ Fixed+
>
> 00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to
> PCI bridge (PCI express gpp port B) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort+ <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 0000b000-0000bfff
> Memory behind bridge: fa000000-fcffffff
> Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort+
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> ExtTag+ RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <8us
> ClockPM- Surprise- LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+
> BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
> Slot #2, PowerLimit 75.000W; Interlock- NoCompl+
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet+ LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
> Selectable De-emphasis: -3.5dB
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
> ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
> EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
> Address: 00000000 Data: 0000
> Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee ATI Device 5a14
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
> Capabilities: [190 v1] Access Control Services
> ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+
> EgressCtrl- DirectTrans+
> ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+
> EgressCtrl- DirectTrans-
> Kernel driver in use: pcieport
>
> 00:04.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to
> PCI bridge (PCI express gpp port D) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 0000e000-0000efff
> Memory behind bridge: fd900000-fd9fffff
> Prefetchable memory behind bridge: 00000000fd600000-00000000fd6fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> ExtTag+ RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM L0s L1, Latency L0 <1us, L1 <8us
> ClockPM- Surprise- LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
> BWMgmt+ ABWMgmt+
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
> Slot #4, PowerLimit 75.000W; Interlock- NoCompl+
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet+ LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
> Selectable De-emphasis: -3.5dB
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
> ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
> EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
> Address: 00000000 Data: 0000
> Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee ATI Device 5a14
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
> Capabilities: [190 v1] Access Control Services
> ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+
> EgressCtrl- DirectTrans+
> ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+
> EgressCtrl- DirectTrans-
> Kernel driver in use: pcieport
>
> 00:09.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to
> PCI bridge (PCI express gpp port H) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fd500000-fd5fffff
> Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> ExtTag+ RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <8us
> ClockPM- Surprise- LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
> BWMgmt+ ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
> Slot #9, PowerLimit 75.000W; Interlock- NoCompl+
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet+ LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
> Selectable De-emphasis: -3.5dB
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
> ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
> EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
> Address: 00000000 Data: 0000
> Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee ATI Device 5a14
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
> Capabilities: [190 v1] Access Control Services
> ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+
> EgressCtrl- DirectTrans+
> ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+
> EgressCtrl- DirectTrans-
> Kernel driver in use: pcieport
>
> 00:0a.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to
> PCI bridge (external gfx1 port A) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: fdd00000-fddfffff
> Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> ExtTag+ RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #5, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <8us
> ClockPM- Surprise- LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
> BWMgmt+ ABWMgmt+
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
> Slot #10, PowerLimit 75.000W; Interlock- NoCompl+
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet+ LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
> Selectable De-emphasis: -3.5dB
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
> ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
> EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
> Address: 00000000 Data: 0000
> Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee ATI Device 5a14
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
> Capabilities: [190 v1] Access Control Services
> ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+
> EgressCtrl- DirectTrans+
> ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+
> EgressCtrl- DirectTrans-
> Kernel driver in use: pcieport
>
> 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40) (prog-if 01
> [AHCI 1.0])
> Subsystem: Giga-byte Technology Device b002
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 19
> Region 0: I/O ports at ff00 [size=8]
> Region 1: I/O ports at fe00 [size=4]
> Region 2: I/O ports at fd00 [size=8]
> Region 3: I/O ports at fc00 [size=4]
> Region 4: I/O ports at fb00 [size=16]
> Region 5: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [70] SATA HBA v1.0 InCfgSpace
> Capabilities: [a4] PCI Advanced Features
> AFCap: TP+ FLR+
> AFCtrl: FLR-
> AFStatus: TP-
> Kernel driver in use: ahci
>
> 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
> Subsystem: Giga-byte Technology Device 5004
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
>
> 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
> Subsystem: Giga-byte Technology Device 5004
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 17
> Region 0: Memory at fdffd000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Capabilities: [e4] Debug port: BAR=1 offset=00e0
> Kernel driver in use: ehci_hcd
>
> 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
> Subsystem: Giga-byte Technology Device 5004
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at fdffc000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
>
> 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
> Subsystem: Giga-byte Technology Device 5004
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 17
> Region 0: Memory at fdffb000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Capabilities: [e4] Debug port: BAR=1 offset=00e0
> Kernel driver in use: ehci_hcd
>
> 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus
> Controller (rev 42)
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00
> Azalia (Intel HDA) (rev 40)
> Subsystem: Giga-byte Technology Device a002
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at fdff4000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: snd_hda_intel
>
> 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
> Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC
> host controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to
> PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
> I/O behind bridge: 0000a000-0000afff
> Memory behind bridge: fdb00000-fdbfffff
> Prefetchable memory behind bridge: fda00000-fdafffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
> 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
> Subsystem: Giga-byte Technology Device 5004
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin C routed to IRQ 18
> Region 0: Memory at fdffa000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
>
> 00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI
> SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal
> decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
> I/O behind bridge: 00009000-00009fff
> Memory behind bridge: fd800000-fd8fffff
> Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> ExtTag+ RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #247, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0
> <64ns, L1 <1us
> ClockPM- Surprise- LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed unknown, Width x16, TrErr- Train- SlotClk+ DLActive-
> BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise-
> Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd-
> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
> Selectable De-emphasis: -6dB
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
> ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
> EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee ATI Device 0000
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
> Kernel driver in use: pcieport
>
> 00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
> Subsystem: Giga-byte Technology Device 5004
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at fdff9000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
>
> 00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
> Subsystem: Giga-byte Technology Device 5004
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 17
> Region 0: Memory at fdff8000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Capabilities: [e4] Debug port: BAR=1 offset=00e0
> Kernel driver in use: ehci_hcd
>
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor
> Function 0
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: [80] HyperTransport: Host or Secondary Interface
> Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
> IsocEn- LSEn+ ExtCTL- 64b+
> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=8bit
> DwFcInEn- LWO=8bit DwFcOutEn-
> Revision ID: 3.00
> Link Frequency: [d]
> Link Error: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+
> 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
>
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor
> Function 1
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor
> Function 2
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor
> Function 3
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: [f0] Secure device <?>
> Kernel driver in use: k10temp
>
> 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor
> Function 4
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Kernel driver in use: fam15h_power
>
> 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor
> Function 5
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 01:00.0 VGA compatible controller: NVIDIA Corporation NV44 [GeForce
> 6200 TurboCache(TM)] (rev a1) (prog-if 00 [VGA controller])
> Subsystem: ASUSTeK Computer Inc. Device 81ae
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort+ <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
> Region 3: Memory at fb000000 (64-bit, non-prefetchable) [size=16M]
> [virtual] Expansion ROM at fc000000 [disabled] [size=128K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [78] Express (v1) Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0
> <1us, L1 <4us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk- DLActive-
> BWMgmt- ABWMgmt-
> Capabilities: [100 v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed- WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> Status: NegoPending- InProgress-
> Capabilities: [128 v1] Power Budgeting <?>
> Kernel driver in use: nouveau
>
> 02:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host
> Controller (rev 01) (prog-if 30 [XHCI])
> Subsystem: Giga-byte Technology Device 5007
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 41
> Region 0: Memory at fd9f8000 (64-bit, non-prefetchable) [size=32K]
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [70] MSI: Enable+ Count=1/4 Maskable+ 64bit+
> Address: 00000000feeff00c Data: 4161
> Masking: 0000000e Pending: 00000000
> Capabilities: [a0] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <64us
> ClockPM+ Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
> BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Not Supported, TimeoutDis-
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
> Selectable De-emphasis: -6dB
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
> ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
> EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
> MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [190 v1] Device Serial Number 01-01-01-01-01-01-01-01
> Kernel driver in use: xhci_hcd
>
> 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
> Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 43
> Region 0: I/O ports at de00 [size=256]
> Region 2: Memory at fdeff000 (64-bit, prefetchable) [size=4K]
> Region 4: Memory at fdef8000 (64-bit, prefetchable) [size=16K]
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Address: 00000000feeff00c Data: 4171
> Capabilities: [70] Express (v2) Endpoint, MSI 01
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 4096 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
> unlimited, L1 <64us
> ClockPM+ Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
> BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
> Selectable De-emphasis: -6dB
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
> ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
> EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
> Vector table: BAR=4 offset=00000000
> PBA: BAR=4 offset=00000800
> Capabilities: [d0] Vital Product Data
> Unknown small resource type 00, will not decode more.
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
> MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [140 v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed- WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> Status: NegoPending- InProgress-
> Capabilities: [160 v1] Device Serial Number 12-34-56-78-12-34-56-78
> Kernel driver in use: r8169
>
> 04:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host
> Controller (rev 01) (prog-if 30 [XHCI])
> Subsystem: Giga-byte Technology Device 5007
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 42
> Region 0: Memory at fddf8000 (64-bit, non-prefetchable) [size=32K]
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [70] MSI: Enable+ Count=1/4 Maskable+ 64bit+
> Address: 00000000feeff00c Data: 4169
> Masking: 0000000e Pending: 00000000
> Capabilities: [a0] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <64us
> ClockPM+ Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
> BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Not Supported, TimeoutDis-
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
> Selectable De-emphasis: -6dB
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
> ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
> EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
> MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [190 v1] Device Serial Number 01-01-01-01-01-01-01-01
> Kernel driver in use: xhci_hcd
>
> 05:0e.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire
> II(M)] IEEE 1394 OHCI Controller (rev c0) (prog-if 10 [OHCI])
> Subsystem: Giga-byte Technology GA-7VT600-1394 Motherboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (8000ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 3
> Region 0: Memory at fdbff000 (32-bit, non-prefetchable) [size=2K]
> Region 1: I/O ports at af00 [size=128]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
--
Regards/Gruss,
Boris.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>