Re: [PATCH RFC v2] mm: Enforce the stack gap when changing inaccessible VMAs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Jann Horn <jannh@xxxxxxxxxx> [241011 14:47]:
> On Fri, Oct 11, 2024 at 7:55 PM Liam R. Howlett <Liam.Howlett@xxxxxxxxxx> wrote:
> > * Jann Horn <jannh@xxxxxxxxxx> [241011 11:51]:
> > > As explained in the comment block this change adds, we can't tell what
> > > userspace's intent is when the stack grows towards an inaccessible VMA.
> > >
> > > We should ensure that, as long as code is compiled with something like
> > > -fstack-check, a stack overflow in this code can never cause the main stack
> > > to overflow into adjacent heap memory - so the bottom of a stack should
> > > never be directly adjacent to an accessible VMA.
> [...]
> > > diff --git a/mm/mmap.c b/mm/mmap.c
> > > index dd4b35a25aeb..937361be3c48 100644
> > > --- a/mm/mmap.c
> > > +++ b/mm/mmap.c
> > > @@ -359,6 +359,20 @@ unsigned long do_mmap(struct file *file, unsigned long addr,
> > >                       return -EEXIST;
> > >       }
> > >
> > > +     /*
> > > +      * This does two things:
> > > +      *
> > > +      * 1. Disallow MAP_FIXED replacing a PROT_NONE VMA adjacent to a stack
> > > +      * with an accessible VMA.
> > > +      * 2. Disallow MAP_FIXED_NOREPLACE creating a new accessible VMA
> > > +      * adjacent to a stack.
> > > +      */
> > > +     if ((flags & (MAP_FIXED_NOREPLACE | MAP_FIXED)) &&
> > > +         (prot & (PROT_READ | PROT_WRITE | PROT_EXEC)) &&
> > > +         !(vm_flags & (VM_GROWSUP|VM_GROWSDOWN)) &&
> > > +         overlaps_stack_gap(mm, addr, len))
> > > +             return (flags & MAP_FIXED) ? -ENOMEM : -EEXIST;
> > > +
> >
> > This is probably going to impact performance for allocators by causing
> > two walks of the tree any time they protect a portion of mmaped area.
> 
> Well, it's one extra walk except on parisc, thanks to the "if
> (!IS_ENABLED(CONFIG_STACK_GROWSUP))" bailout - but point taken, it
> would be better to avoid that.
> 
> > In the mmap_region() code, there is a place we know next/prev on
> > MAP_FIXED, and next for MAP_FIXED_NOREPLACE - which has a vma iterator
> > that would be lower cost than a tree walk.  That area may be a better
> > place to check these requirements.  Unfortunately, it may cause a vma
> > split in the vms_gather_munmap_vmas() call prior to this check, but
> > considering the rarity it may not be that big of a deal?
> 
> Hmm, yeah, that sounds fine to me.
> 
> [...]
> > > diff --git a/mm/mprotect.c b/mm/mprotect.c
> > > index 0c5d6d06107d..2300e2eff956 100644
> > > --- a/mm/mprotect.c
> > > +++ b/mm/mprotect.c
> > > @@ -772,6 +772,12 @@ static int do_mprotect_pkey(unsigned long start, size_t len,
> > >               }
> > >       }
> > >
> > > +     error = -ENOMEM;
> > > +     if ((prot & (PROT_READ | PROT_WRITE | PROT_EXEC)) &&
> > > +         !(vma->vm_flags & (VM_GROWSUP|VM_GROWSDOWN)) &&
> > > +         overlaps_stack_gap(current->mm, start, end - start))
> > > +             goto out;
> > > +
> >
> > We have prev just below your call here, so we could reuse that.  Getting
> > the vma after the mprotect range doesn't seem that easy.  I guess we
> > need to make the loop even more complicated and find the next vma (and
> > remember the fixup can merge).  This isn't as straight forward as what
> > you have, but would be faster.
> 
> For mprotect, maybe one option would be to do it inside the loop?
> Something like this:
> 
> ```
> diff --git a/mm/mprotect.c b/mm/mprotect.c
> index d0e3ebfadef8..2873cc254eaf 100644
> --- a/mm/mprotect.c
> +++ b/mm/mprotect.c
> @@ -790,6 +790,24 @@ static int do_mprotect_pkey(unsigned long start,
> size_t len,
>                         break;
>                 }
> 
> +               if (IS_ENABLED(CONFIG_STACK_GROWSUP) && vma->vm_start
> == start) {
> +                       /* just do an extra lookup here, we do this
> only on parisc */
> +                       if (overlaps_stack_gap_growsup([...])) {
> +                               error = -ENOMEM;
> +                               break;
> +                       }
> +               }

Okay, so this part, before you were checking the next vma.  Since this
is only going to be run for the first vma (vma->vm_start == start), we
can probably move this outside the loop and just get the next vma then
move the vma iterator back (see notes below).

> +               if (vma->vm_end == end) {
> +                       /* peek ahead */
> +                       struct vma_iterator vmi_peek = vmi;
> +                       struct vm_area_struct *next = vma_next(&vmi_peek);
> +
> +                       if (next && overlaps_stack_gap_growsdown([...], next)) {
> +                               error = -ENOMEM;
> +                               break;
> +                       }
> +               }
> +
>                 /* Does the application expect PROT_READ to imply PROT_EXEC */
>                 if (rier && (vma->vm_flags & VM_MAYEXEC))
>                         prot |= PROT_EXEC;
> ```
> 
> Assuming that well-behaved userspace only calls mprotect() ranges that
> are fully covered by VMAs, that should be good enough?

mprotect can split and merge, but I think the side effect here would be
doing an earlier lookup in that rare case.  And it would only matter if
we were not going to split, so vma->vm_end == end works here (since
splitting means the soon-to-be-next vma is already validated).

Annoyingly the merge will re-find the next vma.

> 
> (I don't know how you feel about the idea of peeking ahead from a VMA
> iterator by copying the iterator, I imagine you might have a better
> way to do that...)

vma_next() maps to mas_find(), while vma_prev() maps to mas_prev().  A
valid operation is to find the value then go back one.  The maple state
will do the right thing and return the state to the previous entry even
if there is not a next entry.

All that to say you can probably avoid copying the iterator and just get
vma_next(); then move back with vma_prev().

There is also vma_iter_next_range() and vma_iter_prev_range(), which may
make a better choice as the next/prev range will either be NULL or have
a vma that touches the current one - and that's the case we are
interested in checking.

> 
> > >       prev = vma_prev(&vmi);
> > >       if (start > vma->vm_start)
> > >               prev = vma;





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux