tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master head: bb1b0acdcd66e0d8eedee3570d249e076b89ab32 commit: 02404bdb811dbea6ab523675ec98d9f815cfb3b2 [4503/5508] dt-bindings: net: mdio: change nodename match pattern config: arm-randconfig-051-20240819 (https://download.01.org/0day-ci/archive/20240821/202408212054.B0OvuhZr-lkp@xxxxxxxxx/config) compiler: clang version 20.0.0git (https://github.com/llvm/llvm-project 26670e7fa4f032a019d23d56c6a02926e854e8af) dtschema version: 2024.6.dev10+ge5d88ac reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240821/202408212054.B0OvuhZr-lkp@xxxxxxxxx/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@xxxxxxxxx> | Closes: https://lore.kernel.org/oe-kbuild-all/202408212054.B0OvuhZr-lkp@xxxxxxxxx/ dtcheck warnings: (new ones prefixed by >>) from schema $id: http://devicetree.org/schemas/nvmem/imx-iim.yaml# arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dtb: /soc/bus@80000000/tigerp@83fa0000: failed to match any schema with compatible: ['fsl,imx51-tigerp'] arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dtb: owire@83fa4000: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/w1/fsl-imx-owire.yaml# arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dtb: /soc/bus@80000000/i2c@83fc4000/amp@60: failed to match any schema with compatible: ['ti,tpa6130a2'] arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dtb: audmux@83fd0000: 'aud3', 'ssi2' do not match any of the regexes: '^mux-[0-9a-z]*$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/sound/imx-audmux.yaml# arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dtb: /soc/bus@80000000/m4if@83fd8000: failed to match any schema with compatible: ['fsl,imx51-m4if'] arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dtb: /soc/bus@80000000/nand@83fdb000: failed to match any schema with compatible: ['fsl,imx51-nand'] arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dtb: /disp0: failed to match any schema with compatible: ['fsl,imx-parallel-display'] >> arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dtb: mdio-gpio: $nodename:0: 'mdio-gpio' does not match '^mdio(-(bus|external))?(@.+|-([0-9]+))?$' from schema $id: http://devicetree.org/schemas/net/mdio-gpio.yaml# -- arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dtb: ccm@73fd4000: interrupts: [[0], [71], [4], [0], [72], [4]] is too long from schema $id: http://devicetree.org/schemas/clock/imx5-clock.yaml# arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dtb: /soc/bus@80000000/bridge@83f00000: failed to match any schema with compatible: ['fsl,imx51-aipstz'] arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dtb: efuse@83f98000: compatible: ['fsl,imx51-iim', 'fsl,imx27-iim', 'syscon'] is too long from schema $id: http://devicetree.org/schemas/nvmem/imx-iim.yaml# arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dtb: /soc/bus@80000000/tigerp@83fa0000: failed to match any schema with compatible: ['fsl,imx51-tigerp'] arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dtb: owire@83fa4000: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/w1/fsl-imx-owire.yaml# arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dtb: /soc/bus@80000000/m4if@83fd8000: failed to match any schema with compatible: ['fsl,imx51-m4if'] arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dtb: /soc/bus@80000000/nand@83fdb000: failed to match any schema with compatible: ['fsl,imx51-nand'] >> arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dtb: mdio-gpio: $nodename:0: 'mdio-gpio' does not match '^mdio(-(bus|external))?(@.+|-([0-9]+))?$' from schema $id: http://devicetree.org/schemas/net/mdio-gpio.yaml# -- arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dtb: pmic@58: 'interrupt-controller' is a required property from schema $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dtb: pmic@58: '#interrupt-cells' is a required property from schema $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dtb: /soc/bus@2100000/mipi@21dc000: failed to match any schema with compatible: ['fsl,imx6-mipi-csi2'] arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dtb: /soc/bus@2100000/vdoa@21e4000: failed to match any schema with compatible: ['fsl,imx6q-vdoa'] arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dtb: /soc/ipu@2400000: failed to match any schema with compatible: ['fsl,imx6q-ipu'] arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dtb: /soc/ipu@2800000: failed to match any schema with compatible: ['fsl,imx6q-ipu'] arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dtb: /capture-subsystem: failed to match any schema with compatible: ['fsl,imx-capture-subsystem'] arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dtb: /display-subsystem: failed to match any schema with compatible: ['fsl,imx-display-subsystem'] >> arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dtb: mdio-gpio: $nodename:0: 'mdio-gpio' does not match '^mdio(-(bus|external))?(@.+|-([0-9]+))?$' from schema $id: http://devicetree.org/schemas/net/mdio-gpio.yaml# arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dtb: switch@0: ports:port@4: 'phy-mode' is a required property from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dtb: switch@0: Unevaluated properties are not allowed ('ports' was unexpected) from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# -- arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dtb: pmic@58: 'interrupt-controller' is a required property from schema $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dtb: pmic@58: '#interrupt-cells' is a required property from schema $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dtb: /soc/bus@2100000/mipi@21dc000: failed to match any schema with compatible: ['fsl,imx6-mipi-csi2'] arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dtb: /soc/bus@2100000/vdoa@21e4000: failed to match any schema with compatible: ['fsl,imx6q-vdoa'] arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dtb: /soc/ipu@2400000: failed to match any schema with compatible: ['fsl,imx6q-ipu'] arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dtb: /soc/ipu@2800000: failed to match any schema with compatible: ['fsl,imx6q-ipu'] arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dtb: /capture-subsystem: failed to match any schema with compatible: ['fsl,imx-capture-subsystem'] arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dtb: /display-subsystem: failed to match any schema with compatible: ['fsl,imx-display-subsystem'] >> arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dtb: mdio-gpio: $nodename:0: 'mdio-gpio' does not match '^mdio(-(bus|external))?(@.+|-([0-9]+))?$' from schema $id: http://devicetree.org/schemas/net/mdio-gpio.yaml# arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dtb: switch@0: ports:port@4: 'phy-mode' is a required property from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dtb: switch@0: Unevaluated properties are not allowed ('ports' was unexpected) from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# -- arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dtb: pmic@58: 'interrupt-controller' is a required property from schema $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dtb: pmic@58: '#interrupt-cells' is a required property from schema $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dtb: /soc/bus@2100000/mipi@21dc000: failed to match any schema with compatible: ['fsl,imx6-mipi-csi2'] arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dtb: /soc/bus@2100000/vdoa@21e4000: failed to match any schema with compatible: ['fsl,imx6q-vdoa'] arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dtb: /soc/ipu@2400000: failed to match any schema with compatible: ['fsl,imx6q-ipu'] arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dtb: /soc/ipu@2800000: failed to match any schema with compatible: ['fsl,imx6q-ipu'] arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dtb: /capture-subsystem: failed to match any schema with compatible: ['fsl,imx-capture-subsystem'] arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dtb: /display-subsystem: failed to match any schema with compatible: ['fsl,imx-display-subsystem'] >> arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dtb: mdio-gpio: $nodename:0: 'mdio-gpio' does not match '^mdio(-(bus|external))?(@.+|-([0-9]+))?$' from schema $id: http://devicetree.org/schemas/net/mdio-gpio.yaml# arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dtb: switch@0: ports:port@4: 'phy-mode' is a required property from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dtb: switch@0: Unevaluated properties are not allowed ('ports' was unexpected) from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
