Re: [PATCH v4] mm: Override mTHP "enabled" defaults at kernel cmdline

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 14, 2024 at 7:53 PM Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx> wrote:
>
>
>
> On 2024/8/14 10:02, Barry Song wrote:
> > From: Ryan Roberts <ryan.roberts@xxxxxxx>
> >
> > Add thp_anon= cmdline parameter to allow specifying the default
> > enablement of each supported anon THP size. The parameter accepts the
> > following format and can be provided multiple times to configure each
> > size:
> >
> > thp_anon=<size>,<size>[KMG]:<value>;<size>-<size>[KMG]:<value>
> >
> > An example:
> >
> > thp_anon=16K-64K:always;128K,512K:inherit;256K:madvise;1M-2M:never
> >
> > See Documentation/admin-guide/mm/transhuge.rst for more details.
> >
> > Configuring the defaults at boot time is useful to allow early user
> > space to take advantage of mTHP before its been configured through
> > sysfs.
> >
> > Signed-off-by: Ryan Roberts <ryan.roberts@xxxxxxx>
> > Co-developed-by: Barry Song <v-songbaohua@xxxxxxxx>
> > Signed-off-by: Barry Song <v-songbaohua@xxxxxxxx>
>
> LGTM. Feel free to add:
> Reviewed-by: Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>
> Tested-by: Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>
>

Thanks, Baolin!

> Just a small nit as below.
>
> > ---
> >   -v4:
> >   * use bitmap APIs to set and clear bits. thanks very much for
> >     David's comment!
> >
> >   .../admin-guide/kernel-parameters.txt         |  9 ++
> >   Documentation/admin-guide/mm/transhuge.rst    | 37 +++++--
> >   mm/huge_memory.c                              | 96 ++++++++++++++++++-
> >   3 files changed, 134 insertions(+), 8 deletions(-)
> >
> > diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> > index f0057bac20fb..d0d141d50638 100644
> > --- a/Documentation/admin-guide/kernel-parameters.txt
> > +++ b/Documentation/admin-guide/kernel-parameters.txt
> > @@ -6629,6 +6629,15 @@
> >                       <deci-seconds>: poll all this frequency
> >                       0: no polling (default)
> >   
> > +     thp_anon=       [KNL]
> > +                     Format: <size>,<size>[KMG]:<state>;<size>-<size>[KMG]:<state>
> > +                     state is one of "always", "madvise", "never" or "inherit".
> > +                     Can be used to control the default behavior of the
> > +                     system with respect to anonymous transparent hugepages.
> > +                     Can be used multiple times for multiple anon THP sizes.
> > +                     See Documentation/admin-guide/mm/transhuge.rst for more
> > +                     details.
> > +
> >       threadirqs      [KNL,EARLY]
> >                       Force threading of all interrupt handlers except those
> >                       marked explicitly IRQF_NO_THREAD.
> > diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst
> > index 7072469de8a8..528e1a19d63f 100644
> > --- a/Documentation/admin-guide/mm/transhuge.rst
> > +++ b/Documentation/admin-guide/mm/transhuge.rst
> > @@ -284,13 +284,36 @@ that THP is shared. Exceeding the number would block the collapse::
> >   
> >   A higher value may increase memory footprint for some workloads.
> >   
> > -Boot parameter
> > -==============
> > -
> > -You can change the sysfs boot time defaults of Transparent Hugepage
> > -Support by passing the parameter ``transparent_hugepage=always`` or
> > -``transparent_hugepage=madvise`` or ``transparent_hugepage=never``
> > -to the kernel command line.
> > +Boot parameters
> > +===============
> > +
> > +You can change the sysfs boot time default for the top-level "enabled"
> > +control by passing the parameter ``transparent_hugepage=always`` or
> > +``transparent_hugepage=madvise`` or ``transparent_hugepage=never`` to the
> > +kernel command line.
> > +
> > +Alternatively, each supported anonymous THP size can be controlled by
> > +passing ``thp_anon=<size>,<size>[KMG]:<state>;<size>-<size>[KMG]:<state>``,
> > +where ``<size>`` is the THP size and ``<state>`` is one of ``always``,
> > +``madvise``, ``never`` or ``inherit``.
> > +
> > +For example, the following will set 16K, 32K, 64K THP to ``always``,
> > +set 128K, 512K to ``inherit``, set 256K to ``madvise`` and 1M, 2M
> > +to ``never``::
> > +
> > +     thp_anon=16K-64K:always;128K,512K:inherit;256K:madvise;1M-2M:never
> > +
> > +``thp_anon=`` may be specified multiple times to configure all THP sizes as
> > +required. If ``thp_anon=`` is specified at least once, any anon THP sizes
> > +not explicitly configured on the command line are implicitly set to
> > +``never``.
> > +
> > +``transparent_hugepage`` setting only affects the global toggle. If
> > +``thp_anon`` is not specified, PMD_ORDER THP will default to ``inherit``.
> > +However, if a valid ``thp_anon`` setting is provided by the user, the
> > +PMD_ORDER THP policy will be overridden. If the policy for PMD_ORDER
> > +is not defined within a valid ``thp_anon``, its policy will default to
> > +``never``.
> >   
> >   Hugepages in tmpfs/shmem
> >   ========================
> > diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> > index 1a12c011e2df..c5f4e97b49de 100644
> > --- a/mm/huge_memory.c
> > +++ b/mm/huge_memory.c
> > @@ -81,6 +81,7 @@ unsigned long huge_zero_pfn __read_mostly = ~0UL;
> >   unsigned long huge_anon_orders_always __read_mostly;
> >   unsigned long huge_anon_orders_madvise __read_mostly;
> >   unsigned long huge_anon_orders_inherit __read_mostly;
> > +static bool anon_orders_configured;
> >   
> >   unsigned long __thp_vma_allowable_orders(struct vm_area_struct *vma,
> >                                        unsigned long vm_flags,
> > @@ -737,7 +738,10 @@ static int __init hugepage_init_sysfs(struct kobject **hugepage_kobj)
> >        * disable all other sizes. powerpc's PMD_ORDER isn't a compile-time
> >        * constant so we have to do this here.
> >        */
> > -     huge_anon_orders_inherit = BIT(PMD_ORDER);
> > +     if (!anon_orders_configured) {
> > +             huge_anon_orders_inherit = BIT(PMD_ORDER);
> > +             anon_orders_configured = true;
> > +     }
> >   
> >       *hugepage_kobj = kobject_create_and_add("transparent_hugepage", mm_kobj);
> >       if (unlikely(!*hugepage_kobj)) {
> > @@ -922,6 +926,96 @@ static int __init setup_transparent_hugepage(char *str)
> >   }
> >   __setup("transparent_hugepage=", setup_transparent_hugepage);
> >   
> > +static inline int get_order_from_str(const char *size_str)
> > +{
> > +     unsigned long size;
> > +     char *endptr;
> > +     int order;
> > +
> > +     size = memparse(size_str, &endptr);
> > +     order = fls(size >> PAGE_SHIFT) - 1;
>
> Nit: using get_order() seems more robust?

Yes. I agree get_order() is better:

diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index c5f4e97b49de..0f398d0dbaad 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -933,7 +933,7 @@ static inline int get_order_from_str(const char *size_str)
 	int order;
 
 	size = memparse(size_str, &endptr);
-	order = fls(size >> PAGE_SHIFT) - 1;
+	order = get_order(size);
 	if ((1 << order) & ~THP_ORDERS_ALL_ANON) {
 		pr_err("invalid size %s(order %d) in thp_anon boot parameter\n",
 			size_str, order);
>
> > +     if ((1 << order) & ~THP_ORDERS_ALL_ANON) {
> > +             pr_err("invalid size %s(order %d) in thp_anon boot parameter\n",
> > +                     size_str, order);
> > +             return -EINVAL;
> > +     }
> > +
> > +     return order;
> > +}
> [snip]




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux