>-----Original Message-----
>From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
>Sent: 17 July 2024 13:57
>To: Shiju Jose <shiju.jose@xxxxxxxxxx>
>Cc: linux-edac@xxxxxxxxxxxxxxx; linux-cxl@xxxxxxxxxxxxxxx; linux-
>acpi@xxxxxxxxxxxxxxx; linux-mm@xxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
>bp@xxxxxxxxx; tony.luck@xxxxxxxxx; rafael@xxxxxxxxxx; lenb@xxxxxxxxxx;
>mchehab@xxxxxxxxxx; dan.j.williams@xxxxxxxxx; dave@xxxxxxxxxxxx; Jonathan
>Cameron <jonathan.cameron@xxxxxxxxxx>; dave.jiang@xxxxxxxxx;
>alison.schofield@xxxxxxxxx; vishal.l.verma@xxxxxxxxx; ira.weiny@xxxxxxxxx;
>david@xxxxxxxxxx; Vilas.Sridharan@xxxxxxx; leo.duran@xxxxxxx;
>Yazen.Ghannam@xxxxxxx; rientjes@xxxxxxxxxx; jiaqiyan@xxxxxxxxxx;
>Jon.Grimm@xxxxxxx; dave.hansen@xxxxxxxxxxxxxxx;
>naoya.horiguchi@xxxxxxx; james.morse@xxxxxxx; jthoughton@xxxxxxxxxx;
>somasundaram.a@xxxxxxx; erdemaktas@xxxxxxxxxx; pgonda@xxxxxxxxxx;
>duenwen@xxxxxxxxxx; mike.malvestuto@xxxxxxxxx; gthelen@xxxxxxxxxx;
>wschwartz@xxxxxxxxxxxxxxxxxxx; dferguson@xxxxxxxxxxxxxxxxxxx;
>wbs@xxxxxxxxxxxxxxxxxxxxxx; nifan.cxl@xxxxxxxxx; tanxiaofei
><tanxiaofei@xxxxxxxxxx>; Zengtao (B) <prime.zeng@xxxxxxxxxxxxx>; Roberto
>Sassu <roberto.sassu@xxxxxxxxxx>; kangkang.shen@xxxxxxxxxxxxx;
>wanghuiqiang <wanghuiqiang@xxxxxxxxxx>; Linuxarm
><linuxarm@xxxxxxxxxx>
>Subject: Re: [RFC PATCH v9 02/11] EDAC: Add EDAC scrub control driver
>
>Em Tue, 16 Jul 2024 16:03:26 +0100
><shiju.jose@xxxxxxxxxx> escreveu:
>
>> From: Shiju Jose <shiju.jose@xxxxxxxxxx>
>>
>> Add generic EDAC scrub control driver supports configuring the memory
>> scrubbers in the system. The device with scrub feature, get the scrub
>> descriptor from the EDAC scrub and registers with the EDAC RAS feature
>> driver, which adds the sysfs scrub control interface. The scrub
>> control attributes are available to the userspace in
>/sys/bus/edac/devices/<dev-name>/scrub/.
>>
>> Generic EDAC scrub driver and the common sysfs scrub interface
>> promotes unambiguous access from the userspace irrespective of the
>> underlying scrub devices.
>>
>> Co-developed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
>> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
>> Signed-off-by: Shiju Jose <shiju.jose@xxxxxxxxxx>
>> ---
>> Documentation/ABI/testing/sysfs-edac-scrub | 64 +++++
>> drivers/edac/Makefile | 2 +-
>> drivers/edac/edac_ras_feature.c | 1 +
>> drivers/edac/edac_scrub.c | 312 +++++++++++++++++++++
>> include/linux/edac_ras_feature.h | 28 ++
>> 5 files changed, 406 insertions(+), 1 deletion(-) create mode 100644
>> Documentation/ABI/testing/sysfs-edac-scrub
>> create mode 100755 drivers/edac/edac_scrub.c
>>
>> diff --git a/Documentation/ABI/testing/sysfs-edac-scrub
>> b/Documentation/ABI/testing/sysfs-edac-scrub
>> new file mode 100644
>> index 000000000000..dd19afd5e165
>> --- /dev/null
>> +++ b/Documentation/ABI/testing/sysfs-edac-scrub
>> @@ -0,0 +1,64 @@
>> +What: /sys/bus/edac/devices/<dev-name>/scrub
>> +Date: Oct 2024
>> +KernelVersion: 6.12
>> +Contact: linux-edac@xxxxxxxxxxxxxxx
>> +Description:
>> + The sysfs edac bus devices /<dev-name>/scrub subdirectory
>> + belongs to the memory scrub control feature, where <dev-
>name>
>> + directory corresponds to a device/memory region registered
>> + with the edac scrub driver and thus registered with the
>> + generic edac ras driver too.
>> +
>> +What: /sys/bus/edac/devices/<dev-
>name>/scrub/addr_range_base
>> +Date: Oct 2024
>> +KernelVersion: 6.12
>> +Contact: linux-edac@xxxxxxxxxxxxxxx
>> +Description:
>> + (RW) The base of the address range of the memory region
>> + to be scrubbed (on-demand scrubbing).
>> +
>> +What: /sys/bus/edac/devices/<dev-
>name>/scrub/addr_range_size
>> +Date: Oct 2024
>> +KernelVersion: 6.12
>> +Contact: linux-edac@xxxxxxxxxxxxxxx
>> +Description:
>> + (RW) The size of the address range of the memory region
>> + to be scrubbed (on-demand scrubbing).
>> +
>> +What: /sys/bus/edac/devices/<dev-
>name>/scrub/enable_background
>> +Date: Oct 2024
>> +KernelVersion: 6.12
>> +Contact: linux-edac@xxxxxxxxxxxxxxx
>> +Description:
>> + (RW) Start/Stop background(patrol) scrubbing if supported.
>> +
>> +What: /sys/bus/edac/devices/<dev-
>name>/scrub/enable_on_demand
>> +Date: Oct 2024
>> +KernelVersion: 6.12
>> +Contact: linux-edac@xxxxxxxxxxxxxxx
>> +Description:
>> + (RW) Start/Stop on-demand scrubbing the memory region
>> + if supported.
>
>This is a generic comment for all sysfs calls: what happens if not supported?
>
>There are a couple of ways to implement it, like:
>
>1. Don't create the attribute;
>2. return an error code (-ENOENT? -EINVAL?) if trying to read or
> write to the devnode - please detail the used error code(s);
>
>In any case, please define the behavior and document it.
>
>From what I see, you're setting 0x444 on RW nodes when write is not enabled,
>but still it is possible to not have RO supported. This is specially true as
>technology evolves, as memory controllers and different types of memories may
>have very different ways to control it[1].
It is not true. If the parent device does not support and define callbacks for both read and write,
then return 0 as you can see in the scrub_attr_visible() and the attribute
would not be present for that device in the sysfs.
For e.g. attributes addr_range_base and addr_range_size does not support by CXL patrol
scrub feature, but supported by ACPI RAS2 scrub feature.
>
>[1] If you're curious enough, one legacy example of memories
> implemented on a very different way was Fully Buffered DIMMs
> where each DIMM had its own internal chipset to offload
> certain tasks, including scrubbing and ECC implementation.
> It ended not being succeeded long term, as it required
> special DIMMs for server's market, reducing the production
> scale, but it is an interesting example about how hardware
> designs could be innovative breaking existing paradigms.
> The FB-DIMM design actually forced a redesign at the EDAC
> subsystem, as it was too centered on how an specific type
> of memory controllers.
>
>> +
>> +What: /sys/bus/edac/devices/<dev-name>/scrub/name
>> +Date: Oct 2024
>> +KernelVersion: 6.12
>> +Contact: linux-edac@xxxxxxxxxxxxxxx
>> +Description:
>> + (RO) name of the memory scrubber
>> +
>
>
>> +What: /sys/bus/edac/devices/<dev-
>name>/scrub/cycle_in_hours_available
>> +Date: Oct 2024
>> +KernelVersion: 6.12
>> +Contact: linux-edac@xxxxxxxxxxxxxxx
>> +Description:
>> + (RO) Supported range for the scrub cycle in hours by the
>> + memory scrubber.
>> +
>> +What: /sys/bus/edac/devices/<dev-
>name>/scrub/cycle_in_hours
>> +Date: Oct 2024
>> +KernelVersion: 6.12
>> +Contact: linux-edac@xxxxxxxxxxxxxxx
>> +Description:
>> + (RW) The scrub cycle in hours specified and it must be with in
>the
>> + supported range by the memory scrubber.
>
>Why specifying it in hours? I would use seconds, as it is easy to represent one
>hour as 3600 seconds, but you can't specify a cycle of, let's say, 30min, if the
>minimum range value is one hour.
For the CXL patrol scrub, scrub cycle defined in hours(CXL spec 3.1 Table 8-208. Device Patrol Scrub
Control Feature Writable Attributes), but ACPI RAS2 does not define the unit for the scrub cycle.
Thus proposed represent scrub cycle in hours in common.
Not sure how convenient to set the scrub cycle in seconds from the user perspective and
also is it require to finish the background scrubbing in such short time?
>
>I mean, we never know how technology will evolve nor how manufacturers will
>implement support for scrubbing cycle on their chipsets.
>
>> diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index
>> c532b57a6d8a..de56cbd039eb 100644
>> --- a/drivers/edac/Makefile
>> +++ b/drivers/edac/Makefile
>> @@ -10,7 +10,7 @@ obj-$(CONFIG_EDAC) := edac_core.o
>>
>> edac_core-y := edac_mc.o edac_device.o edac_mc_sysfs.o
>> edac_core-y += edac_module.o edac_device_sysfs.o wq.o
>> -edac_core-y += edac_ras_feature.o
>> +edac_core-y += edac_ras_feature.o edac_scrub.o
>>
>> edac_core-$(CONFIG_EDAC_DEBUG) += debugfs.o
>>
>> diff --git a/drivers/edac/edac_ras_feature.c
>> b/drivers/edac/edac_ras_feature.c index 24a729fea66f..48927f868372
>> 100755
>> --- a/drivers/edac/edac_ras_feature.c
>> +++ b/drivers/edac/edac_ras_feature.c
>> @@ -36,6 +36,7 @@ static int edac_ras_feat_scrub_init(struct device
>> *parent, {
>> sdata->ops = sfeat->scrub_ops;
>> sdata->private = sfeat->scrub_ctx;
>> + attr_groups[0] = edac_scrub_get_desc();
>>
>> return 1;
>> }
>> diff --git a/drivers/edac/edac_scrub.c b/drivers/edac/edac_scrub.c new
>> file mode 100755 index 000000000000..0b07eafd3551
>> --- /dev/null
>> +++ b/drivers/edac/edac_scrub.c
>> @@ -0,0 +1,312 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Generic EDAC scrub driver supports controlling the memory
>> + * scrubbers in the system and the common sysfs scrub interface
>> + * promotes unambiguous access from the userspace.
>> + *
>> + * Copyright (c) 2024 HiSilicon Limited.
>> + */
>> +
>> +#define pr_fmt(fmt) "EDAC SCRUB: " fmt
>> +
>> +#include <linux/edac_ras_feature.h>
>> +
>> +static ssize_t addr_range_base_show(struct device *ras_feat_dev,
>> + struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct edac_ras_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev);
>> + const struct edac_scrub_ops *ops = ctx->scrub.ops;
>> + u64 base, size;
>> + int ret;
>> +
>> + ret = ops->read_range(ras_feat_dev->parent, ctx->scrub.private, &base,
>&size);
>> + if (ret)
>> + return ret;
>
>Also a generic comment applied to all devnodes: what if ops->read_range is
>NULL? Shouldn't it be checked? Btw, you could use read_range == NULL if to
>implement error handling for unsupported features.
If ops->read_range is NULL, scrub_attr_visible() return 0 and then the corresponding attributes
addr_range_base and addr_range_size would not be added in the sysfs.
Same for other attributes.
>
>> +
>> + return sysfs_emit(buf, "0x%llx\n", base); }
>> +
>> +static ssize_t addr_range_size_show(struct device *ras_feat_dev,
>> + struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct edac_ras_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev);
>> + const struct edac_scrub_ops *ops = ctx->scrub.ops;
>> + u64 base, size;
>> + int ret;
>> +
>> + ret = ops->read_range(ras_feat_dev->parent, ctx->scrub.private, &base,
>&size);
>> + if (ret)
>> + return ret;
>> +
>> + return sysfs_emit(buf, "0x%llx\n", size); }
>> +
>> +static ssize_t addr_range_base_store(struct device *ras_feat_dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t len) {
>> + struct edac_ras_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev);
>> + const struct edac_scrub_ops *ops = ctx->scrub.ops;
>> + u64 base, size;
>> + int ret;
>> +
>> + ret = ops->read_range(ras_feat_dev->parent, ctx->scrub.private, &base,
>&size);
>> + if (ret)
>> + return ret;
>> +
>> + ret = kstrtou64(buf, 16, &base);
>
>I would use base 0, letting the parser expect "0x" for hexadecimal values.
>Same for other *_store methods.
Will check.
>
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = ops->write_range(ras_feat_dev->parent, ctx->scrub.private, base,
>size);
>> + if (ret)
>> + return ret;
>> +
>> + return len;
>> +}
>> +
>> +static ssize_t addr_range_size_store(struct device *ras_feat_dev,
>> + struct device_attribute *attr,
>> + const char *buf,
>> + size_t len)
>> +{
>> + struct edac_ras_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev);
>> + const struct edac_scrub_ops *ops = ctx->scrub.ops;
>> + u64 base, size;
>> + int ret;
>> +
>> + ret = ops->read_range(ras_feat_dev->parent, ctx->scrub.private, &base,
>&size);
>> + if (ret)
>> + return ret;
>> +
>> + ret = kstrtou64(buf, 16, &size);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = ops->write_range(ras_feat_dev->parent, ctx->scrub.private, base,
>size);
>> + if (ret)
>> + return ret;
>> +
>> + return len;
>> +}
>> +
>> +static ssize_t enable_background_store(struct device *ras_feat_dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t len) {
>> + struct edac_ras_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev);
>> + const struct edac_scrub_ops *ops = ctx->scrub.ops;
>> + bool enable;
>> + int ret;
>> +
>> + ret = kstrtobool(buf, &enable);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = ops->set_enabled_bg(ras_feat_dev->parent, ctx->scrub.private,
>enable);
>> + if (ret)
>> + return ret;
>> +
>> + return len;
>> +}
>> +
>> +static ssize_t enable_background_show(struct device *ras_feat_dev,
>> + struct device_attribute *attr, char *buf) {
>> + struct edac_ras_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev);
>> + const struct edac_scrub_ops *ops = ctx->scrub.ops;
>> + bool enable;
>> + int ret;
>> +
>> + ret = ops->get_enabled_bg(ras_feat_dev->parent, ctx->scrub.private,
>&enable);
>> + if (ret)
>> + return ret;
>> +
>> + return sysfs_emit(buf, "%d\n", enable); }
>> +
>> +static ssize_t enable_on_demand_show(struct device *ras_feat_dev,
>> + struct device_attribute *attr, char *buf) {
>> + struct edac_ras_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev);
>> + const struct edac_scrub_ops *ops = ctx->scrub.ops;
>> + bool enable;
>> + int ret;
>> +
>> + ret = ops->get_enabled_od(ras_feat_dev->parent, ctx->scrub.private,
>&enable);
>> + if (ret)
>> + return ret;
>> +
>> + return sysfs_emit(buf, "%d\n", enable); }
>> +
>> +static ssize_t enable_on_demand_store(struct device *ras_feat_dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t len) {
>> + struct edac_ras_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev);
>> + const struct edac_scrub_ops *ops = ctx->scrub.ops;
>> + bool enable;
>> + int ret;
>> +
>> + ret = kstrtobool(buf, &enable);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = ops->set_enabled_od(ras_feat_dev->parent, ctx->scrub.private,
>enable);
>> + if (ret)
>> + return ret;
>> +
>> + return len;
>> +}
>> +
>> +static ssize_t name_show(struct device *ras_feat_dev,
>> + struct device_attribute *attr, char *buf) {
>> + struct edac_ras_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev);
>> + const struct edac_scrub_ops *ops = ctx->scrub.ops;
>> + int ret;
>> +
>> + ret = ops->get_name(ras_feat_dev->parent, ctx->scrub.private, buf);
>> + if (ret)
>> + return ret;
>> +
>> + return strlen(buf);
>> +}
>> +
>> +static ssize_t cycle_in_hours_show(struct device *ras_feat_dev, struct
>device_attribute *attr,
>> + char *buf)
>> +{
>> + struct edac_ras_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev);
>> + const struct edac_scrub_ops *ops = ctx->scrub.ops;
>> + u64 val;
>> + int ret;
>> +
>> + ret = ops->cycle_in_hours_read(ras_feat_dev->parent, ctx-
>>scrub.private, &val);
>> + if (ret)
>> + return ret;
>> +
>> + return sysfs_emit(buf, "0x%llx\n", val); }
>> +
>> +static ssize_t cycle_in_hours_store(struct device *ras_feat_dev, struct
>device_attribute *attr,
>> + const char *buf, size_t len)
>> +{
>> + struct edac_ras_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev);
>> + const struct edac_scrub_ops *ops = ctx->scrub.ops;
>> + long val;
>> + int ret;
>> +
>> + ret = kstrtol(buf, 10, &val);
>
>Even here, I would be using base=0, but if you only want to support base 10,
>please document it at the sysfs ABI.
Will do.
>
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = ops->cycle_in_hours_write(ras_feat_dev->parent, ctx-
>>scrub.private, val);
>> + if (ret)
>> + return ret;
>> +
>> + return len;
>> +}
>> +
>> +static ssize_t cycle_in_hours_range_show(struct device *ras_feat_dev,
>> + struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct edac_ras_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev);
>> + const struct edac_scrub_ops *ops = ctx->scrub.ops;
>> + u64 min_schrs, max_schrs;
>> + int ret;
>> +
>> + ret = ops->cycle_in_hours_range(ras_feat_dev->parent, ctx-
>>scrub.private,
>> + &min_schrs, &max_schrs);
>> + if (ret)
>> + return ret;
>> +
>> + return sysfs_emit(buf, "0x%llx-0x%llx\n", min_schrs, max_schrs);
>
>Hmm... you added the store in decimal, but here you're showing in hexa...
Will check for store and show decimal.
>
>Btw, don't group multiple values on a single sysfs node. Instead, implement two
>separate devnodes:
Here we are showing the supported range for the scrub cycle.
I am wondering any opinion on this from others?
>
> min-scrub-cycle
> max-scrub-cycle
>
>(see the note above about "hours")
>
>
>> +}
>> +
>> +static DEVICE_ATTR_RW(addr_range_base); static
>> +DEVICE_ATTR_RW(addr_range_size); static
>> +DEVICE_ATTR_RW(enable_background);
>> +static DEVICE_ATTR_RW(enable_on_demand); static
>DEVICE_ATTR_RO(name);
>> +static DEVICE_ATTR_RW(cycle_in_hours); static
>> +DEVICE_ATTR_RO(cycle_in_hours_range);
>> +
>> +static struct attribute *scrub_attrs[] = {
>> + &dev_attr_addr_range_base.attr,
>> + &dev_attr_addr_range_size.attr,
>> + &dev_attr_enable_background.attr,
>> + &dev_attr_enable_on_demand.attr,
>> + &dev_attr_name.attr,
>> + &dev_attr_cycle_in_hours.attr,
>> + &dev_attr_cycle_in_hours_range.attr,
>> + NULL
>> +};
>> +
>> +static umode_t scrub_attr_visible(struct kobject *kobj,
>> + struct attribute *a, int attr_id) {
>> + struct device *ras_feat_dev = kobj_to_dev(kobj);
>> + struct edac_ras_feat_ctx *ctx;
>> + const struct edac_scrub_ops *ops;
>> +
>> + ctx = dev_get_drvdata(ras_feat_dev);
>> + if (!ctx)
>> + return 0;
>> +
>> + ops = ctx->scrub.ops;
>> + if (a == &dev_attr_addr_range_base.attr ||
>> + a == &dev_attr_addr_range_size.attr) {
>> + if (ops->read_range && ops->write_range)
>> + return a->mode;
>> + if (ops->read_range)
>> + return 0444;
>> + return 0;
>> + }
>> + if (a == &dev_attr_enable_background.attr) {
>> + if (ops->set_enabled_bg && ops->get_enabled_bg)
>> + return a->mode;
>> + if (ops->get_enabled_bg)
>> + return 0444;
>> + return 0;
>> + }
>> + if (a == &dev_attr_enable_on_demand.attr) {
>> + if (ops->set_enabled_od && ops->get_enabled_od)
>> + return a->mode;
>> + if (ops->get_enabled_od)
>> + return 0444;
>> + return 0;
>> + }
>> + if (a == &dev_attr_name.attr)
>> + return ops->get_name ? a->mode : 0;
>> + if (a == &dev_attr_cycle_in_hours_range.attr)
>> + return ops->cycle_in_hours_range ? a->mode : 0;
>> + if (a == &dev_attr_cycle_in_hours.attr) { /* Write only makes little sense
>*/
>> + if (ops->cycle_in_hours_read && ops->cycle_in_hours_write)
>> + return a->mode;
>> + if (ops->cycle_in_hours_read)
>> + return 0444;
>> + return 0;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct attribute_group scrub_attr_group = {
>> + .name = "scrub",
>> + .attrs = scrub_attrs,
>> + .is_visible = scrub_attr_visible,
>> +};
>> +
>> +/**
>> + * edac_scrub_get_desc - get edac scrub's attr descriptor
>> + *
>> + * Returns attribute_group for the scrub feature.
>> + */
>> +const struct attribute_group *edac_scrub_get_desc(void) {
>> + return &scrub_attr_group;
>> +}
>> diff --git a/include/linux/edac_ras_feature.h
>> b/include/linux/edac_ras_feature.h
>> index 000e99141023..462f9ecbf9d4 100755
>> --- a/include/linux/edac_ras_feature.h
>> +++ b/include/linux/edac_ras_feature.h
>> @@ -19,6 +19,34 @@ enum edac_ras_feat {
>> ras_feat_max
>> };
>>
>> +/**
>> + * struct scrub_ops - scrub device operations (all elements optional)
>> + * @read_range: read base and offset of scrubbing range.
>> + * @write_range: set the base and offset of the scrubbing range.
>> + * @get_enabled_bg: check if currently performing background scrub.
>> + * @set_enabled_bg: start or stop a bg-scrub.
>> + * @get_enabled_od: check if currently performing on-demand scrub.
>> + * @set_enabled_od: start or stop an on-demand scrub.
>> + * @cycle_in_hours_range: retrieve limits on supported cycle in hours.
>> + * @cycle_in_hours_read: read the scrub cycle in hours.
>> + * @cycle_in_hours_write: set the scrub cycle in hours.
>> + * @get_name: get the memory scrubber's name.
>> + */
>> +struct edac_scrub_ops {
>> + int (*read_range)(struct device *dev, void *drv_data, u64 *base, u64
>*size);
>> + int (*write_range)(struct device *dev, void *drv_data, u64 base, u64
>size);
>> + int (*get_enabled_bg)(struct device *dev, void *drv_data, bool *enable);
>> + int (*set_enabled_bg)(struct device *dev, void *drv_data, bool enable);
>> + int (*get_enabled_od)(struct device *dev, void *drv_data, bool *enable);
>> + int (*set_enabled_od)(struct device *dev, void *drv_data, bool enable);
>> + int (*cycle_in_hours_range)(struct device *dev, void *drv_data, u64
>*min, u64 *max);
>> + int (*cycle_in_hours_read)(struct device *dev, void *drv_data, u64
>*schrs);
>> + int (*cycle_in_hours_write)(struct device *dev, void *drv_data, u64
>schrs);
>> + int (*get_name)(struct device *dev, void *drv_data, char *buf); };
>> +
>> +const struct attribute_group *edac_scrub_get_desc(void);
>> +
>> struct edac_ecs_ex_info {
>> u16 num_media_frus;
>> };
>
>
>
>Thanks,
>Mauro
Thanks,
Shiju
