On 2024/7/4 21:58, Ryan Roberts wrote:
On 04/07/2024 12:15, Baolin Wang wrote:
On 2024/7/4 01:25, Ryan Roberts wrote:
On 11/06/2024 11:11, Baolin Wang wrote:
Commit 19eaf44954df adds multi-size THP (mTHP) for anonymous pages, that
can allow THP to be configured through the sysfs interface located at
'/sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled'.
However, the anonymous shmem will ignore the anonymous mTHP rule
configured through the sysfs interface, and can only use the PMD-mapped
THP, that is not reasonable. Users expect to apply the mTHP rule for
all anonymous pages, including the anonymous shmem, in order to enjoy
the benefits of mTHP. For example, lower latency than PMD-mapped THP,
smaller memory bloat than PMD-mapped THP, contiguous PTEs on ARM architecture
to reduce TLB miss etc. In addition, the mTHP interfaces can be extended
to support all shmem/tmpfs scenarios in the future, especially for the
shmem mmap() case.
The primary strategy is similar to supporting anonymous mTHP. Introduce
a new interface '/mm/transparent_hugepage/hugepage-XXkb/shmem_enabled',
which can have almost the same values as the top-level
'/sys/kernel/mm/transparent_hugepage/shmem_enabled', with adding a new
additional "inherit" option and dropping the testing options 'force' and
'deny'. By default all sizes will be set to "never" except PMD size,
which is set to "inherit". This ensures backward compatibility with the
anonymous shmem enabled of the top level, meanwhile also allows independent
control of anonymous shmem enabled for each mTHP.
Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>
[...]
Hi Baolin,
I'm currently trying to fix a bug where khugepaged is not started if only shmem
is enabled for THP. See discussion at [1]. It's been broken like this forever.
Assuming anon and shmem THP are initially both disabled:
# echo never > /sys/kernel/mm/transparent_hugepage/shmem_enabled
# echo never > /sys/kernel/mm/transparent_hugepage/enabled
<khugepaged is stopped here>
Then shemem THP is enabled:
# echo always > /sys/kernel/mm/transparent_hugepage/shmem_enabled
<khugepaged is not started, this is a bug>
Thanks Ryan. Yes, this is a real problem.
As part of investigating the fix, I stumbled upon this patch, which I remember
reviewing an early version of but I've been out for a while and missed the
latter versions. See below for comments and questions; the answers to which will
help me figure out how to fix the above...
[1]
https://lore.kernel.org/linux-mm/20240702144617.2291480-1-ryan.roberts@xxxxxxx/
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+static unsigned long shmem_allowable_huge_orders(struct inode *inode,
+ struct vm_area_struct *vma, pgoff_t index,
+ bool global_huge)
+{
+ unsigned long mask = READ_ONCE(huge_shmem_orders_always);
+ unsigned long within_size_orders =
READ_ONCE(huge_shmem_orders_within_size);
+ unsigned long vm_flags = vma->vm_flags;
+ /*
+ * Check all the (large) orders below HPAGE_PMD_ORDER + 1 that
+ * are enabled for this vma.
+ */
+ unsigned long orders = BIT(PMD_ORDER + 1) - 1;
+ loff_t i_size;
+ int order;
+
+ if ((vm_flags & VM_NOHUGEPAGE) ||
+ test_bit(MMF_DISABLE_THP, &vma->vm_mm->flags))
+ return 0;
+
+ /* If the hardware/firmware marked hugepage support disabled. */
+ if (transparent_hugepage_flags & (1 << TRANSPARENT_HUGEPAGE_UNSUPPORTED))
+ return 0;
+
+ /*
+ * Following the 'deny' semantics of the top level, force the huge
+ * option off from all mounts.
+ */
+ if (shmem_huge == SHMEM_HUGE_DENY)
+ return 0;
I don't quite get this, I don't think its the desirable behaviour. This is
saying that if the top-level shemem_enabled control is set to 'deny', then all
mTHP sizes, regardless of their control's setting are disabled?
The anon controls don't work like that; you can set the top-level control to
anything you like, but its only consumed if the per-size controls are
inheriting it.
IMO, 'deny' option is not similar like 'never' option.
So for the deny case, wouldn't it be better to allow that as an option on all
the per-size controls (and implicitly let it be inherrited from the top-level)?
From 'deny' option's semantics:
"disables huge on shm_mnt and all mounts, for emergency use;"
Right. Today, tmpfs only supports PMD-sized THP. So for all per-size controls
except the PMD-size control, 'deny' and 'never' would be the same practically
speaking. For the PMD-size control, 'deny' would disable THP for both anon shmem
and all tmpfs mounts, whereas 'never' would only disable THP for anon shmem.
When tmpfs gains mTHP support, 'deny' in the other per-size controls would also
disable that size for the tmpfs mounts.
Not really. We will not add 'deny' and 'force' testing option for each
per-size mTHP control as suggested by Hugh in the previous MM meeting[1].
[1]
https://lore.kernel.org/all/f1783ff0-65bd-4b2b-8952-52b6822a0835@xxxxxxxxxx/T/#u
I disagree with the current implementation where setting it up so that a
top-level 'deny' overrides whatever is in the per-size controls simply because
it's different to the model implemented for anon THP. That's my 2 cents. If
nobody else agrees then that ok - I'll fix the above bug according to the
current model.
I remember we have customers who use the 'deny' option to forcibly turn
off the huge page option for all mounts (including shm_mnt). But if
shmem/tmpfs uses mTHP and users set 'deny', they cannot force all huge
orders off and they must also do 'echo never >
/sys/kernel/mm/transparent_hugepage/hugepages-XXXkB/shmem_enabled' to
disable all huge orders option, which breaks the previous user habits, IMHO.
In additon, I do not think this creates a difference with the anon mTHP
model, as anon mTHP does not have these shmem special 'deny' and 'force'
options for testing purposes. In my view, the current 'deny' option
fulfills the semantic definition of 'For use in emergencies, to force
the *huge* option off from all mounts'.
It is usually used for testing to shut down all huge pages from the old ages.
Moreover, mTHP interfaces will be used as a huge order filter to support tmpfs,
so I think it will make life easier to disable all huge orders for testing or
emergency use, as well as to maintain the original semantics.>
+
+ /*
+ * Only allow inherit orders if the top-level value is 'force', which
+ * means non-PMD sized THP can not override 'huge' mount option now.
+ */
+ if (shmem_huge == SHMEM_HUGE_FORCE)
+ return READ_ONCE(huge_shmem_orders_inherit);
I vaguely recall that we originally discussed that trying to set 'force' on the
top level control while any per-size controls were set to 'inherit' would be an
error, and trying to set 'force' on any per-size control except the PMD-size
would be an error?
Right.
I don't really understand this logic. Shouldn't we just be looking at the
per-size control settings (or the top-level control as a proxy for every
per-size control that has 'inherit' set)?
‘force’ will apply the huge orders for anon shmem and tmpfs, so now we only
allow pmd-mapped THP to be forced. We should not look at per-size control
settings for tmpfs now (mTHP for tmpfs will be discussed in future).
But why not just maintain per-size controls and refactor tmpfs to just look at
the PMD-size THP control for now. It can ignore the other sizes. That's much
simpler and cleaner IMHO.
As I said above, 'force' and 'deny' option will not be added for
per-size controls.
