We are using 3.0.33 kernel and verification is done on ARM cortex a9.
On Fri, Jul 27, 2012 at 12:33 PM, naveen yadav <yad.naveen@xxxxxxxxx> wrote:
> Hi All,
>
>
> I am testing the cgroup block IO attributes in multiple threads scenario.
> I tried testing Throttling policy (max read/write bytes per second per device)
> that can be set using the following attribute-
> "blkio.throttle.write_bps_device"
> "blkio.throttle.read_bps_device"
> but I am not getting appropriate bandwidth readings, in case of
> process and threads.
>
> The following is my kernel configuration-
> # CONFIG_RCU_BOOST is not set
> # CONFIG_IKCONFIG is not set
> CONFIG_LOG_BUF_SHIFT=17
> CONFIG_CGROUPS=y
> # CONFIG_CGROUP_DEBUG is not set
> # CONFIG_CGROUP_FREEZER is not set
> CONFIG_CGROUP_DEVICE=y
> # CONFIG_CPUSETS is not set
> # CONFIG_CGROUP_CPUACCT is not set
> CONFIG_RESOURCE_COUNTERS=y
> CONFIG_CGROUP_MEM_RES_CTLR=y
> CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
> CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED=y
> # CONFIG_CGROUP_PERF is not set
> CONFIG_CGROUP_SCHED=y
> CONFIG_FAIR_GROUP_SCHED=y
> CONFIG_RT_GROUP_SCHED=y
> CONFIG_BLK_CGROUP=y
> CONFIG_DEBUG_BLK_CGROUP=y
> # CONFIG_NAMESPACES is not set
> CONFIG_BLK_DEV_THROTTLING=y
> CONFIG_CFQ_GROUP_IOSCHED=y
>
> Below is the procedure that I followed for testing-
> first of all I mounted the cgroup blkio on /mnt
> $mount -t cgroup -o blkio none /mnt
> $mount | grep "cgroup"
> ==> output
> none on /sys/fs/cgroup type cgroup (rw,relatime,cpu)
> none on /mnt type cgroup (rw,relatime,blkio)
>
> The default readings were taken through dd command
> $dd if=linux.3.0.20.tgz of=/dev/null bs=4096 count=51200
> 28419+1 records in
> 28419+1 records out
> 116405611 bytes (111.0MB) copied, 6.041795 seconds, 18.4MB/s
> $dd if=/dev/zero of=test1 bs=4096 count=51200
> 51200+0 records in
> 51200+0 records out
> 209715200 bytes (200.0MB) copied, 31.203680 seconds, 6.4MB/s
>
> Then I made two groups in /mnt named g1 and g2 and set the bandwidth -
> $echo "8:0 2097152" > /mnt/g1/blkio.throttle.read_bps_device //2MB
> $echo "8:0 16777216" > /mnt/g2/blkio.throttle.read_bps_device //16MB
> $echo "8:0 1048576" > /mnt/g1/blkio.throttle.write_bps_device //1MB
> $echo "8:0 5242880" > /mnt/g2/blkio.throttle.write_bps_device //5MB
>
> Test program -
> ////////////////////////////////////////////////////////////////////////////////////
> #define MAX_NAME_LEN 16
> #define NO_THREADS 2
>
> volatile char flag=0;
> struct sigaction sigact;
> static char count=0;
>
> void *threadFunc(void *arg)
> {
> char cmd[100];
> sprintf(cmd,"dd if=/dev/zero of=ThreadTest%d bs=4096 count=51200",++count);
> while(flag != 2);
> system("echo 3 > /proc/sys/vm/drop_caches");
>
> system("dd if=Linux.3.0.20.tgz of=/dev/null bs=4096 count=51200");
> system("echo 3 > /proc/sys/vm/drop_caches");
> system(cmd);
> while(1);
> return NULL;
> }
>
> static void signal_handler(int sig) {
> printf("Caught signal SIGUSR1 : %d\n",sig);
> flag = 1;
> }
>
> void init_signals(void) {
> sigact.sa_handler = signal_handler;
> sigemptyset(&sigact.sa_mask);
> sigact.sa_flags = 0;
> sigaction(SIGUSR1, &sigact, (struct sigaction *)NULL);
> }
>
> int main(int argc, char *argv[])
> {
> pid_t pid;
> pthread_t pth[2];
> struct sched_param mysched;
> char name[MAX_NAME_LEN + 1];
> int i;
> int j;
>
> init_signals();
> mysched.sched_priority = 19;
>
> for (i=0; i<3; ++i) {
> pid = fork();
> if (pid == 0) {
> sprintf(name, "%d",i);
> prctl(PR_SET_NAME, (unsigned long)&name);
>
> if (argc==2 && !strcmp(argv[1], "FIFO")) {
> sched_setscheduler(0, SCHED_FIFO, &mysched);
> } else if (argc==2 && !strcmp(argv[1], "RR")) {
> sched_setscheduler(0, SCHED_RR, &mysched);
> }
> printf("\nPID=%d, Sched Policy=%d\n",
> getpid(),sched_getscheduler );
>
> sleep(30);
> printf("Starting Thread Creation\n");
>
> for(j=0;j<NO_THREADS;j++) {
> pthread_create(&pth[j],NULL,threadFunc,NULL);
> }
>
> while(!flag);
> printf("InProcess\n");
> system("echo 3 > /proc/sys/vm/drop_caches");
> system("dd if=Linux.3.0.20.tgz of=/dev/null bs=4096 count=51200");
> system("echo 3 > /proc/sys/vm/drop_caches");
> system("dd if=/dtv/usb/sda1/temp of=ProcessTest bs=4096 count=51200");
> flag++;
>
> for(j=0;j<NO_THREADS;j++) {
> pthread_join(pth[j], NULL);
> }
> }
> }
> return 0;
> }
> ////////////////////////////////////////////////////////////////////////////////////////////////////////
>
> ProcedureProcedure to run:
>
> linux#> ./cgroup_thread_test_arm_blk
> cgroup_thread_test_arm_blk cgroup_thread_test_arm_blk3
> linux#> ./cgroup_thread_test_arm_blk
>
> PID=130, Sched Policy=0
> linux#>
> PID=132, Sched Policy=0
>
> PID=131, Sched Policy=0
>
> linux#> echo 130 > /mnt/g1/tasks
> linux#> echo 131 > /mnt/g2/tasks
> linux#> Starting Thread Creation
> Starting Thread Creation
> Starting Thread Creation
>
> linux#>
> linux#> kill -SIGUSR1 130
> linux#> Caught signal SIGUSR1 : 10
> InProcess
> 28419+1 records in
> 28419+1 records out
> 116405611 bytes (111.0MB) copied, 56.019700 seconds, 2.0MB/s
> 51200+0 records in
> 51200+0 records out
> 209715200 bytes (200.0MB) copied, 30.881699 seconds, 6.5MB/s
> 28419+1 records in
> 28419+1 records out
> 116405611 bytes (111.0MB) copied, 28419+1 records in
> 28419+1 records out
> 116405611 bytes (111.0MB) copied, 63.842881 seconds, 1.7MB/s
> 63.844210 seconds, 1.7MB/s
> 51200+0 records in
> 51200+0 records out
> 209715200 bytes (200.0MB) copied, 51200+0 records in
> 51200+0 records out
> 209715200 bytes (200.0MB) copied, 62.031691 seconds, 3.2MB/s
> 62.029856 seconds, 3.2MB/s
>
> linux#> kill -SIGUSR1 131
> linux#> Caught signal SIGUSR1 : 10
> InProcess
> 28419+1 records in
> 28419+1 records out
> 116405611 bytes (111.0MB) copied, 11.231604 seconds, 9.9MB/s
> 51200+0 records in
> 51200+0 records out
> 209715200 bytes (200.0MB) copied, 38.505295 seconds, 5.2MB/s
> 28419+1 records in
> 28419+1 records out
> 116405611 bytes (111.0MB) copied, 28419+1 records in
> 28419+1 records out
> 116405611 bytes (111.0MB) copied, 28.580193 seconds, 3.9MB/s
> 28.578926 seconds, 3.9MB/s
> 51200+0 records in
> 51200+0 records out
> 209715200 bytes (200.0MB) copied, 267.614328 seconds, 765.3KB/s
> 51200+0 records in
> 51200+0 records out
> 209715200 bytes (200.0MB) copied, 269.800526 seconds, 759.1KB/s
>
> The limits assigned to the cgroups are not followed by process.
>
>
>
> Thanks
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>