Re: [PATCH 5/5] fstests: add stress truncation + writeback test

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jun 10, 2024 at 08:02:02PM -0700, Luis Chamberlain wrote:
> Stress test folio splits by using the new debugfs interface to a target
> a new smaller folio order while triggering writeback at the same time.
> 
> This is known to only creates a crash with min order enabled, so for example
> with a 16k block sized XFS test profile, an xarray fix for that is merged
> already. This issue is fixed by kernel commit 2a0774c2886d ("XArray: set the
> marks correctly when splitting an entry").
> 
> If inspecting more closely, you'll want to enable on your kernel boot:
> 
> 	dyndbg='file mm/huge_memory.c +p'
> 
> Since we want to race large folio splits we also augment the full test
> output log $seqres.full with the test specific number of successful
> splits from vmstat thp_split_page and thp_split_page_failed. The larger
> the vmstat thp_split_page the more we stress test this path.
> 
> This test reproduces a really hard to reproduce crash immediately.
> 
> Signed-off-by: Luis Chamberlain <mcgrof@xxxxxxxxxx>
> ---
>  common/rc             |  14 +++++
>  tests/generic/751     | 127 ++++++++++++++++++++++++++++++++++++++++++
>  tests/generic/751.out |   2 +
>  3 files changed, 143 insertions(+)
>  create mode 100755 tests/generic/751
>  create mode 100644 tests/generic/751.out
> 
> diff --git a/common/rc b/common/rc
> index 30beef4e5c02..60f572108818 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -158,6 +158,20 @@ _require_vm_compaction()
>  	    _notrun "Need compaction enabled CONFIG_COMPACTION=y"
>  	fi
>  }
> +
> +# Requires CONFIG_DEBUGFS and truncation knobs
> +_require_split_debugfs()

Er... I thought "split" referred to debugfs itself.

_require_split_huge_pages_knob?

> +{
> +       if [ ! -f $DEBUGFS_MNT/split_huge_pages ]; then
> +           _notrun "Needs CONFIG_DEBUGFS and split_huge_pages"
> +       fi
> +}
> +
> +_split_huge_pages_all()
> +{
> +	echo 1 > $DEBUGFS_MNT/split_huge_pages
> +}
> +
>  # Get hugepagesize in bytes
>  _get_hugepagesize()
>  {
> diff --git a/tests/generic/751 b/tests/generic/751
> new file mode 100755
> index 000000000000..7cc96054a5a9
> --- /dev/null
> +++ b/tests/generic/751
> @@ -0,0 +1,127 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (C) 2024 Luis Chamberlain. All Rights Reserved.
> +#
> +# FS QA Test No. 751
> +#
> +# stress page cache truncation + writeback
> +#
> +# This aims at trying to reproduce a difficult to reproduce bug found with
> +# min order. The issue was root caused to an xarray bug when we split folios
> +# to another order other than 0. This functionality is used to support min
> +# order. The crash:
> +#
> +# https://gist.github.com/mcgrof/d12f586ec6ebe32b2472b5d634c397df

You might want to paste the stacktrace in here directly, in case the
gist ever goes away.

> +#
> +# This may also find future truncation bugs in the future, as truncating any
> +# mapped file through the collateral of using echo 1 > split_huge_pages will
> +# always respect the min order. Truncating to a larger order then is excercised
> +# when this test is run against any filesystem LBS profile or an LBS device.
> +#
> +# If you're enabling this and want to check underneath the hood you may want to
> +# enable:
> +#
> +# dyndbg='file mm/huge_memory.c +p'
> +#
> +# This tests aims at increasing the rate of successful truncations so we want
> +# to increase the value of thp_split_page in $seqres.full. Using echo 1 >
> +# split_huge_pages is extremely aggressive, and even accounts for anonymous
> +# memory on a system, however we accept that tradeoff for the efficiency of
> +# doing the work in-kernel for any mapped file too. Our general goal here is to
> +# race with folio truncation + writeback.
> +
> +. ./common/preamble
> +
> +_begin_fstest auto long_rw stress soak smoketest
> +
> +# Override the default cleanup function.
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +	rm -f $runfile
> +	kill -9 $split_huge_pages_files_pid > /dev/null 2>&1
> +}
> +
> +fio_config=$tmp.fio
> +fio_out=$tmp.fio.out
> +
> +# real QA test starts here
> +_supported_fs generic
> +_require_test
> +_require_scratch
> +_require_debugfs
> +_require_split_debugfs
> +_require_command "$KILLALL_PROG" "killall"
> +_fixed_by_git_commit kernel 2a0774c2886d \
> +	"XArray: set the marks correctly when splitting an entry"
> +
> +# we need buffered IO to force truncation races with writeback in the
> +# page cache
> +cat >$fio_config <<EOF
> +[force_large_large_folio_parallel_writes]
> +nrfiles=10
> +direct=0
> +bs=4M
> +group_reporting=1
> +filesize=1GiB
> +readwrite=write
> +fallocate=none
> +numjobs=$(nproc)
> +directory=$SCRATCH_MNT
> +runtime=100*${TIME_FACTOR}
> +time_based
> +EOF
> +
> +_require_fio $fio_config
> +
> +echo "Silence is golden"
> +
> +_scratch_mkfs >>$seqres.full 2>&1
> +_scratch_mount >> $seqres.full 2>&1
> +
> +# used to let our loops know when to stop
> +runfile="$tmp.keep.running.loop"
> +touch $runfile
> +
> +# The background ops are out of bounds, the goal is to race with fsstress.
> +
> +# Force folio split if possible, this seems to be screaming for MADV_NOHUGEPAGE
> +# for large folios.
> +while [ -e $runfile ]; do
> +	_split_huge_pages_all >/dev/null 2>&1
> +done &
> +split_huge_pages_files_pid=$!
> +
> +split_count_before=0
> +split_count_failed_before=0
> +
> +if grep -q thp_split_page /proc/vmstat; then
> +	split_count_before=$(grep ^thp_split_page /proc/vmstat | head -1 | awk '{print $2}')
> +	split_count_failed_before=$(grep ^thp_split_page_failed /proc/vmstat | head -1 | awk '{print $2}')
> +else
> +	echo "no thp_split_page in /proc/vmstat" >> $seqres.full
> +fi
> +
> +# we blast away with large writes to force large folio writes when
> +# possible.
> +echo -e "Running fio with config:\n" >> $seqres.full
> +cat $fio_config >> $seqres.full
> +$FIO_PROG $fio_config --alloc-size=$(( $(nproc) * 8192 )) --output=$fio_out
> +
> +rm -f $runfile
> +
> +wait > /dev/null 2>&1
> +
> +if grep -q thp_split_page /proc/vmstat; then
> +	split_count_after=$(grep ^thp_split_page /proc/vmstat | head -1 | awk '{print $2}')
> +	split_count_failed_after=$(grep ^thp_split_page_failed /proc/vmstat | head -1 | awk '{print $2}')

I think this ought to be a separate function for cleanliness?

_proc_vmstat()
{
	awk -v name="$1" '{if ($1 ~ name) {print($2)}}' /proc/vmstat
}

	split_count_after=$(_proc_vmstat thp_split_page)

Otherwise this test looks fine to me.

--D

> +	thp_split_page=$((split_count_after - split_count_before))
> +	thp_split_page_failed=$((split_count_failed_after - split_count_failed_before))
> +
> +	echo "vmstat thp_split_page: $thp_split_page" >> $seqres.full
> +	echo "vmstat thp_split_page_failed: $thp_split_page_failed" >> $seqres.full
> +fi
> +
> +status=0
> +exit
> diff --git a/tests/generic/751.out b/tests/generic/751.out
> new file mode 100644
> index 000000000000..6479fa6f1404
> --- /dev/null
> +++ b/tests/generic/751.out
> @@ -0,0 +1,2 @@
> +QA output created by 751
> +Silence is golden
> -- 
> 2.43.0
> 
> 




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux