From: Michael Ellerman <mpe@xxxxxxxxxxxxxx> This is a squash of series from Michael https://patchwork.ozlabs.org/project/linuxppc-dev/patch/20240524073141.1637736-1-mpe@xxxxxxxxxxxxxx/ The nohash HTW_IBM (Hardware Table Walk) code is unused since support for A2 was removed in commit fb5a515704d7 ("powerpc: Remove platforms/ wsp and associated pieces") (2014). The remaining supported CPUs use either no HTW (data_tlb_miss_bolted), or the e6500 HTW (data_tlb_miss_e6500). Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx> powerpc/64e: Split out nohash Book3E 64-bit code A reasonable chunk of nohash/tlb.c is 64-bit only code, split it out into a separate file. Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx> powerpc/64e: Drop E500 ifdefs in 64-bit code All 64-bit Book3E have E500=y, so drop the unneeded ifdefs. Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx> powerpc/64e: Drop MMU_FTR_TYPE_FSL_E checks in 64-bit code All 64-bit Book3E have MMU_FTR_TYPE_FSL_E, since A2 was removed, so remove checks for it in 64-bit only code. Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx> powerpc/64e: Consolidate TLB miss handler patching The 64e TLB miss handler patching is done in setup_mmu_htw(), and then again immediately afterward in early_init_mmu_global(). Consolidate it into a single location. Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx> powerpc/64e: Drop unused TLB miss handlers There are two possibilities for book3e_htw_mode, PPC_HTW_E6500 or PPC_HTW_NONE. The TLB miss handlers are patched to use, respectively: - exc_[data|indstruction]_tlb_miss_e6500_book3e - exc_[data|indstruction]_tlb_miss_bolted_book3e Which means the default handlers are never used. Remove those, and use the bolted handlers (PPC_HTW_NONE) by default. Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx> Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxxxxxx> --- arch/powerpc/include/asm/nohash/mmu-e500.h | 3 +- arch/powerpc/kernel/exceptions-64e.S | 4 +- arch/powerpc/kernel/setup_64.c | 6 +- arch/powerpc/mm/nohash/Makefile | 2 +- arch/powerpc/mm/nohash/tlb.c | 398 +------------------ arch/powerpc/mm/nohash/tlb_64e.c | 314 +++++++++++++++ arch/powerpc/mm/nohash/tlb_low_64e.S | 421 --------------------- 7 files changed, 320 insertions(+), 828 deletions(-) create mode 100644 arch/powerpc/mm/nohash/tlb_64e.c diff --git a/arch/powerpc/include/asm/nohash/mmu-e500.h b/arch/powerpc/include/asm/nohash/mmu-e500.h index 6ddced0415cb..7dc24b8632d7 100644 --- a/arch/powerpc/include/asm/nohash/mmu-e500.h +++ b/arch/powerpc/include/asm/nohash/mmu-e500.h @@ -303,8 +303,7 @@ extern unsigned long linear_map_top; extern int book3e_htw_mode; #define PPC_HTW_NONE 0 -#define PPC_HTW_IBM 1 -#define PPC_HTW_E6500 2 +#define PPC_HTW_E6500 1 /* * 64-bit booke platforms don't load the tlb in the tlb miss handler code. diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index dcf0591ad3c2..63f6b9f513a4 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -485,8 +485,8 @@ interrupt_base_book3e: /* fake trap */ EXCEPTION_STUB(0x160, decrementer) /* 0x0900 */ EXCEPTION_STUB(0x180, fixed_interval) /* 0x0980 */ EXCEPTION_STUB(0x1a0, watchdog) /* 0x09f0 */ - EXCEPTION_STUB(0x1c0, data_tlb_miss) - EXCEPTION_STUB(0x1e0, instruction_tlb_miss) + EXCEPTION_STUB(0x1c0, data_tlb_miss_bolted) + EXCEPTION_STUB(0x1e0, instruction_tlb_miss_bolted) EXCEPTION_STUB(0x200, altivec_unavailable) EXCEPTION_STUB(0x220, altivec_assist) EXCEPTION_STUB(0x260, perfmon) diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index ae36a129789f..22f83fbbc762 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -696,11 +696,7 @@ __init u64 ppc64_bolted_size(void) { #ifdef CONFIG_PPC_BOOK3E_64 /* Freescale BookE bolts the entire linear mapping */ - /* XXX: BookE ppc64_rma_limit setup seems to disagree? */ - if (early_mmu_has_feature(MMU_FTR_TYPE_FSL_E)) - return linear_map_top; - /* Other BookE, we assume the first GB is bolted */ - return 1ul << 30; + return linear_map_top; #else /* BookS radix, does not take faults on linear mapping */ if (early_radix_enabled()) diff --git a/arch/powerpc/mm/nohash/Makefile b/arch/powerpc/mm/nohash/Makefile index b3f0498dd42f..90e846f0c46c 100644 --- a/arch/powerpc/mm/nohash/Makefile +++ b/arch/powerpc/mm/nohash/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-y += mmu_context.o tlb.o tlb_low.o kup.o -obj-$(CONFIG_PPC_BOOK3E_64) += tlb_low_64e.o book3e_pgtable.o +obj-$(CONFIG_PPC_BOOK3E_64) += tlb_64e.o tlb_low_64e.o book3e_pgtable.o obj-$(CONFIG_40x) += 40x.o obj-$(CONFIG_44x) += 44x.o obj-$(CONFIG_PPC_8xx) += 8xx.o diff --git a/arch/powerpc/mm/nohash/tlb.c b/arch/powerpc/mm/nohash/tlb.c index 5ffa0af4328a..f57dc721d063 100644 --- a/arch/powerpc/mm/nohash/tlb.c +++ b/arch/powerpc/mm/nohash/tlb.c @@ -110,28 +110,6 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { }; #endif -/* The variables below are currently only used on 64-bit Book3E - * though this will probably be made common with other nohash - * implementations at some point - */ -#ifdef CONFIG_PPC64 - -int mmu_pte_psize; /* Page size used for PTE pages */ -int mmu_vmemmap_psize; /* Page size used for the virtual mem map */ -int book3e_htw_mode; /* HW tablewalk? Value is PPC_HTW_* */ -unsigned long linear_map_top; /* Top of linear mapping */ - - -/* - * Number of bytes to add to SPRN_SPRG_TLB_EXFRAME on crit/mcheck/debug - * exceptions. This is used for bolted and e6500 TLB miss handlers which - * do not modify this SPRG in the TLB miss code; for other TLB miss handlers, - * this is set to zero. - */ -int extlb_level_exc; - -#endif /* CONFIG_PPC64 */ - #ifdef CONFIG_PPC_E500 /* next_tlbcam_idx is used to round-robin tlbcam entry assignment */ DEFINE_PER_CPU(int, next_tlbcam_idx); @@ -358,381 +336,7 @@ void tlb_flush(struct mmu_gather *tlb) flush_tlb_mm(tlb->mm); } -/* - * Below are functions specific to the 64-bit variant of Book3E though that - * may change in the future - */ - -#ifdef CONFIG_PPC64 - -/* - * Handling of virtual linear page tables or indirect TLB entries - * flushing when PTE pages are freed - */ -void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address) -{ - int tsize = mmu_psize_defs[mmu_pte_psize].enc; - - if (book3e_htw_mode != PPC_HTW_NONE) { - unsigned long start = address & PMD_MASK; - unsigned long end = address + PMD_SIZE; - unsigned long size = 1UL << mmu_psize_defs[mmu_pte_psize].shift; - - /* This isn't the most optimal, ideally we would factor out the - * while preempt & CPU mask mucking around, or even the IPI but - * it will do for now - */ - while (start < end) { - __flush_tlb_page(tlb->mm, start, tsize, 1); - start += size; - } - } else { - unsigned long rmask = 0xf000000000000000ul; - unsigned long rid = (address & rmask) | 0x1000000000000000ul; - unsigned long vpte = address & ~rmask; - - vpte = (vpte >> (PAGE_SHIFT - 3)) & ~0xffful; - vpte |= rid; - __flush_tlb_page(tlb->mm, vpte, tsize, 0); - } -} - -static void __init setup_page_sizes(void) -{ - unsigned int tlb0cfg; - unsigned int tlb0ps; - unsigned int eptcfg; - int i, psize; - -#ifdef CONFIG_PPC_E500 - unsigned int mmucfg = mfspr(SPRN_MMUCFG); - int fsl_mmu = mmu_has_feature(MMU_FTR_TYPE_FSL_E); - - if (fsl_mmu && (mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V1) { - unsigned int tlb1cfg = mfspr(SPRN_TLB1CFG); - unsigned int min_pg, max_pg; - - min_pg = (tlb1cfg & TLBnCFG_MINSIZE) >> TLBnCFG_MINSIZE_SHIFT; - max_pg = (tlb1cfg & TLBnCFG_MAXSIZE) >> TLBnCFG_MAXSIZE_SHIFT; - - for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { - struct mmu_psize_def *def; - unsigned int shift; - - def = &mmu_psize_defs[psize]; - shift = def->shift; - - if (shift == 0 || shift & 1) - continue; - - /* adjust to be in terms of 4^shift Kb */ - shift = (shift - 10) >> 1; - - if ((shift >= min_pg) && (shift <= max_pg)) - def->flags |= MMU_PAGE_SIZE_DIRECT; - } - - goto out; - } - - if (fsl_mmu && (mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V2) { - u32 tlb1cfg, tlb1ps; - - tlb0cfg = mfspr(SPRN_TLB0CFG); - tlb1cfg = mfspr(SPRN_TLB1CFG); - tlb1ps = mfspr(SPRN_TLB1PS); - eptcfg = mfspr(SPRN_EPTCFG); - - if ((tlb1cfg & TLBnCFG_IND) && (tlb0cfg & TLBnCFG_PT)) - book3e_htw_mode = PPC_HTW_E6500; - - /* - * We expect 4K subpage size and unrestricted indirect size. - * The lack of a restriction on indirect size is a Freescale - * extension, indicated by PSn = 0 but SPSn != 0. - */ - if (eptcfg != 2) - book3e_htw_mode = PPC_HTW_NONE; - - for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { - struct mmu_psize_def *def = &mmu_psize_defs[psize]; - - if (!def->shift) - continue; - - if (tlb1ps & (1U << (def->shift - 10))) { - def->flags |= MMU_PAGE_SIZE_DIRECT; - - if (book3e_htw_mode && psize == MMU_PAGE_2M) - def->flags |= MMU_PAGE_SIZE_INDIRECT; - } - } - - goto out; - } -#endif - - tlb0cfg = mfspr(SPRN_TLB0CFG); - tlb0ps = mfspr(SPRN_TLB0PS); - eptcfg = mfspr(SPRN_EPTCFG); - - /* Look for supported direct sizes */ - for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { - struct mmu_psize_def *def = &mmu_psize_defs[psize]; - - if (tlb0ps & (1U << (def->shift - 10))) - def->flags |= MMU_PAGE_SIZE_DIRECT; - } - - /* Indirect page sizes supported ? */ - if ((tlb0cfg & TLBnCFG_IND) == 0 || - (tlb0cfg & TLBnCFG_PT) == 0) - goto out; - - book3e_htw_mode = PPC_HTW_IBM; - - /* Now, we only deal with one IND page size for each - * direct size. Hopefully all implementations today are - * unambiguous, but we might want to be careful in the - * future. - */ - for (i = 0; i < 3; i++) { - unsigned int ps, sps; - - sps = eptcfg & 0x1f; - eptcfg >>= 5; - ps = eptcfg & 0x1f; - eptcfg >>= 5; - if (!ps || !sps) - continue; - for (psize = 0; psize < MMU_PAGE_COUNT; psize++) { - struct mmu_psize_def *def = &mmu_psize_defs[psize]; - - if (ps == (def->shift - 10)) - def->flags |= MMU_PAGE_SIZE_INDIRECT; - if (sps == (def->shift - 10)) - def->ind = ps + 10; - } - } - -out: - /* Cleanup array and print summary */ - pr_info("MMU: Supported page sizes\n"); - for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { - struct mmu_psize_def *def = &mmu_psize_defs[psize]; - const char *__page_type_names[] = { - "unsupported", - "direct", - "indirect", - "direct & indirect" - }; - if (def->flags == 0) { - def->shift = 0; - continue; - } - pr_info(" %8ld KB as %s\n", 1ul << (def->shift - 10), - __page_type_names[def->flags & 0x3]); - } -} - -static void __init setup_mmu_htw(void) -{ - /* - * If we want to use HW tablewalk, enable it by patching the TLB miss - * handlers to branch to the one dedicated to it. - */ - - switch (book3e_htw_mode) { - case PPC_HTW_IBM: - patch_exception(0x1c0, exc_data_tlb_miss_htw_book3e); - patch_exception(0x1e0, exc_instruction_tlb_miss_htw_book3e); - break; -#ifdef CONFIG_PPC_E500 - case PPC_HTW_E6500: - extlb_level_exc = EX_TLB_SIZE; - patch_exception(0x1c0, exc_data_tlb_miss_e6500_book3e); - patch_exception(0x1e0, exc_instruction_tlb_miss_e6500_book3e); - break; -#endif - } - pr_info("MMU: Book3E HW tablewalk %s\n", - book3e_htw_mode != PPC_HTW_NONE ? "enabled" : "not supported"); -} - -/* - * Early initialization of the MMU TLB code - */ -static void early_init_this_mmu(void) -{ - unsigned int mas4; - - /* Set MAS4 based on page table setting */ - - mas4 = 0x4 << MAS4_WIMGED_SHIFT; - switch (book3e_htw_mode) { - case PPC_HTW_E6500: - mas4 |= MAS4_INDD; - mas4 |= BOOK3E_PAGESZ_2M << MAS4_TSIZED_SHIFT; - mas4 |= MAS4_TLBSELD(1); - mmu_pte_psize = MMU_PAGE_2M; - break; - - case PPC_HTW_IBM: - mas4 |= MAS4_INDD; - mas4 |= BOOK3E_PAGESZ_1M << MAS4_TSIZED_SHIFT; - mmu_pte_psize = MMU_PAGE_1M; - break; - - case PPC_HTW_NONE: - mas4 |= BOOK3E_PAGESZ_4K << MAS4_TSIZED_SHIFT; - mmu_pte_psize = mmu_virtual_psize; - break; - } - mtspr(SPRN_MAS4, mas4); - -#ifdef CONFIG_PPC_E500 - if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) { - unsigned int num_cams; - bool map = true; - - /* use a quarter of the TLBCAM for bolted linear map */ - num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4; - - /* - * Only do the mapping once per core, or else the - * transient mapping would cause problems. - */ -#ifdef CONFIG_SMP - if (hweight32(get_tensr()) > 1) - map = false; -#endif - - if (map) - linear_map_top = map_mem_in_cams(linear_map_top, - num_cams, false, true); - } -#endif - - /* A sync won't hurt us after mucking around with - * the MMU configuration - */ - mb(); -} - -static void __init early_init_mmu_global(void) -{ - /* XXX This should be decided at runtime based on supported - * page sizes in the TLB, but for now let's assume 16M is - * always there and a good fit (which it probably is) - * - * Freescale booke only supports 4K pages in TLB0, so use that. - */ - if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) - mmu_vmemmap_psize = MMU_PAGE_4K; - else - mmu_vmemmap_psize = MMU_PAGE_16M; - - /* XXX This code only checks for TLB 0 capabilities and doesn't - * check what page size combos are supported by the HW. It - * also doesn't handle the case where a separate array holds - * the IND entries from the array loaded by the PT. - */ - /* Look for supported page sizes */ - setup_page_sizes(); - - /* Look for HW tablewalk support */ - setup_mmu_htw(); - -#ifdef CONFIG_PPC_E500 - if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) { - if (book3e_htw_mode == PPC_HTW_NONE) { - extlb_level_exc = EX_TLB_SIZE; - patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e); - patch_exception(0x1e0, - exc_instruction_tlb_miss_bolted_book3e); - } - } -#endif - - /* Set the global containing the top of the linear mapping - * for use by the TLB miss code - */ - linear_map_top = memblock_end_of_DRAM(); - - ioremap_bot = IOREMAP_BASE; -} - -static void __init early_mmu_set_memory_limit(void) -{ -#ifdef CONFIG_PPC_E500 - if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) { - /* - * Limit memory so we dont have linear faults. - * Unlike memblock_set_current_limit, which limits - * memory available during early boot, this permanently - * reduces the memory available to Linux. We need to - * do this because highmem is not supported on 64-bit. - */ - memblock_enforce_memory_limit(linear_map_top); - } -#endif - - memblock_set_current_limit(linear_map_top); -} - -/* boot cpu only */ -void __init early_init_mmu(void) -{ - early_init_mmu_global(); - early_init_this_mmu(); - early_mmu_set_memory_limit(); -} - -void early_init_mmu_secondary(void) -{ - early_init_this_mmu(); -} - -void setup_initial_memory_limit(phys_addr_t first_memblock_base, - phys_addr_t first_memblock_size) -{ - /* On non-FSL Embedded 64-bit, we adjust the RMA size to match - * the bolted TLB entry. We know for now that only 1G - * entries are supported though that may eventually - * change. - * - * on FSL Embedded 64-bit, usually all RAM is bolted, but with - * unusual memory sizes it's possible for some RAM to not be mapped - * (such RAM is not used at all by Linux, since we don't support - * highmem on 64-bit). We limit ppc64_rma_size to what would be - * mappable if this memblock is the only one. Additional memblocks - * can only increase, not decrease, the amount that ends up getting - * mapped. We still limit max to 1G even if we'll eventually map - * more. This is due to what the early init code is set up to do. - * - * We crop it to the size of the first MEMBLOCK to - * avoid going over total available memory just in case... - */ -#ifdef CONFIG_PPC_E500 - if (early_mmu_has_feature(MMU_FTR_TYPE_FSL_E)) { - unsigned long linear_sz; - unsigned int num_cams; - - /* use a quarter of the TLBCAM for bolted linear map */ - num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4; - - linear_sz = map_mem_in_cams(first_memblock_size, num_cams, - true, true); - - ppc64_rma_size = min_t(u64, linear_sz, 0x40000000); - } else -#endif - ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000); - - /* Finally limit subsequent allocations */ - memblock_set_current_limit(first_memblock_base + ppc64_rma_size); -} -#else /* ! CONFIG_PPC64 */ +#ifndef CONFIG_PPC64 void __init early_init_mmu(void) { unsigned long root = of_get_flat_dt_root(); diff --git a/arch/powerpc/mm/nohash/tlb_64e.c b/arch/powerpc/mm/nohash/tlb_64e.c new file mode 100644 index 000000000000..053128a5636c --- /dev/null +++ b/arch/powerpc/mm/nohash/tlb_64e.c @@ -0,0 +1,314 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2008,2009 Ben Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx> + * IBM Corp. + * + * Derived from arch/ppc/mm/init.c: + * Copyright (C) 1995-1996 Gary Thomas (gdt@xxxxxxxxxxxx) + * + * Modifications by Paul Mackerras (PowerMac) (paulus@xxxxxxxxxxxxx) + * and Cort Dougan (PReP) (cort@xxxxxxxxxx) + * Copyright (C) 1996 Paul Mackerras + * + * Derived from "arch/i386/mm/init.c" + * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds + */ + +#include <linux/kernel.h> +#include <linux/export.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/pagemap.h> +#include <linux/memblock.h> + +#include <asm/pgalloc.h> +#include <asm/tlbflush.h> +#include <asm/tlb.h> +#include <asm/code-patching.h> +#include <asm/cputhreads.h> + +#include <mm/mmu_decl.h> + +/* The variables below are currently only used on 64-bit Book3E + * though this will probably be made common with other nohash + * implementations at some point + */ +int mmu_pte_psize; /* Page size used for PTE pages */ +int mmu_vmemmap_psize; /* Page size used for the virtual mem map */ +int book3e_htw_mode; /* HW tablewalk? Value is PPC_HTW_* */ +unsigned long linear_map_top; /* Top of linear mapping */ + + +/* + * Number of bytes to add to SPRN_SPRG_TLB_EXFRAME on crit/mcheck/debug + * exceptions. This is used for bolted and e6500 TLB miss handlers which + * do not modify this SPRG in the TLB miss code; for other TLB miss handlers, + * this is set to zero. + */ +int extlb_level_exc; + +/* + * Handling of virtual linear page tables or indirect TLB entries + * flushing when PTE pages are freed + */ +void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address) +{ + int tsize = mmu_psize_defs[mmu_pte_psize].enc; + + if (book3e_htw_mode != PPC_HTW_NONE) { + unsigned long start = address & PMD_MASK; + unsigned long end = address + PMD_SIZE; + unsigned long size = 1UL << mmu_psize_defs[mmu_pte_psize].shift; + + /* This isn't the most optimal, ideally we would factor out the + * while preempt & CPU mask mucking around, or even the IPI but + * it will do for now + */ + while (start < end) { + __flush_tlb_page(tlb->mm, start, tsize, 1); + start += size; + } + } else { + unsigned long rmask = 0xf000000000000000ul; + unsigned long rid = (address & rmask) | 0x1000000000000000ul; + unsigned long vpte = address & ~rmask; + + vpte = (vpte >> (PAGE_SHIFT - 3)) & ~0xffful; + vpte |= rid; + __flush_tlb_page(tlb->mm, vpte, tsize, 0); + } +} + +static void __init setup_page_sizes(void) +{ + unsigned int tlb0cfg; + unsigned int eptcfg; + int psize; + + unsigned int mmucfg = mfspr(SPRN_MMUCFG); + + if ((mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V1) { + unsigned int tlb1cfg = mfspr(SPRN_TLB1CFG); + unsigned int min_pg, max_pg; + + min_pg = (tlb1cfg & TLBnCFG_MINSIZE) >> TLBnCFG_MINSIZE_SHIFT; + max_pg = (tlb1cfg & TLBnCFG_MAXSIZE) >> TLBnCFG_MAXSIZE_SHIFT; + + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { + struct mmu_psize_def *def; + unsigned int shift; + + def = &mmu_psize_defs[psize]; + shift = def->shift; + + if (shift == 0 || shift & 1) + continue; + + /* adjust to be in terms of 4^shift Kb */ + shift = (shift - 10) >> 1; + + if ((shift >= min_pg) && (shift <= max_pg)) + def->flags |= MMU_PAGE_SIZE_DIRECT; + } + + goto out; + } + + if ((mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V2) { + u32 tlb1cfg, tlb1ps; + + tlb0cfg = mfspr(SPRN_TLB0CFG); + tlb1cfg = mfspr(SPRN_TLB1CFG); + tlb1ps = mfspr(SPRN_TLB1PS); + eptcfg = mfspr(SPRN_EPTCFG); + + if ((tlb1cfg & TLBnCFG_IND) && (tlb0cfg & TLBnCFG_PT)) + book3e_htw_mode = PPC_HTW_E6500; + + /* + * We expect 4K subpage size and unrestricted indirect size. + * The lack of a restriction on indirect size is a Freescale + * extension, indicated by PSn = 0 but SPSn != 0. + */ + if (eptcfg != 2) + book3e_htw_mode = PPC_HTW_NONE; + + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { + struct mmu_psize_def *def = &mmu_psize_defs[psize]; + + if (!def->shift) + continue; + + if (tlb1ps & (1U << (def->shift - 10))) { + def->flags |= MMU_PAGE_SIZE_DIRECT; + + if (book3e_htw_mode && psize == MMU_PAGE_2M) + def->flags |= MMU_PAGE_SIZE_INDIRECT; + } + } + + goto out; + } +out: + /* Cleanup array and print summary */ + pr_info("MMU: Supported page sizes\n"); + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { + struct mmu_psize_def *def = &mmu_psize_defs[psize]; + const char *__page_type_names[] = { + "unsupported", + "direct", + "indirect", + "direct & indirect" + }; + if (def->flags == 0) { + def->shift = 0; + continue; + } + pr_info(" %8ld KB as %s\n", 1ul << (def->shift - 10), + __page_type_names[def->flags & 0x3]); + } +} + +/* + * Early initialization of the MMU TLB code + */ +static void early_init_this_mmu(void) +{ + unsigned int mas4; + + /* Set MAS4 based on page table setting */ + + mas4 = 0x4 << MAS4_WIMGED_SHIFT; + switch (book3e_htw_mode) { + case PPC_HTW_E6500: + mas4 |= MAS4_INDD; + mas4 |= BOOK3E_PAGESZ_2M << MAS4_TSIZED_SHIFT; + mas4 |= MAS4_TLBSELD(1); + mmu_pte_psize = MMU_PAGE_2M; + break; + + case PPC_HTW_NONE: + mas4 |= BOOK3E_PAGESZ_4K << MAS4_TSIZED_SHIFT; + mmu_pte_psize = mmu_virtual_psize; + break; + } + mtspr(SPRN_MAS4, mas4); + + unsigned int num_cams; + bool map = true; + + /* use a quarter of the TLBCAM for bolted linear map */ + num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4; + + /* + * Only do the mapping once per core, or else the + * transient mapping would cause problems. + */ +#ifdef CONFIG_SMP + if (hweight32(get_tensr()) > 1) + map = false; +#endif + + if (map) + linear_map_top = map_mem_in_cams(linear_map_top, + num_cams, false, true); + + /* A sync won't hurt us after mucking around with + * the MMU configuration + */ + mb(); +} + +static void __init early_init_mmu_global(void) +{ + /* + * Freescale booke only supports 4K pages in TLB0, so use that. + */ + mmu_vmemmap_psize = MMU_PAGE_4K; + + /* XXX This code only checks for TLB 0 capabilities and doesn't + * check what page size combos are supported by the HW. It + * also doesn't handle the case where a separate array holds + * the IND entries from the array loaded by the PT. + */ + /* Look for supported page sizes */ + setup_page_sizes(); + + /* + * If we want to use HW tablewalk, enable it by patching the TLB miss + * handlers to branch to the one dedicated to it. + */ + extlb_level_exc = EX_TLB_SIZE; + switch (book3e_htw_mode) { + case PPC_HTW_E6500: + patch_exception(0x1c0, exc_data_tlb_miss_e6500_book3e); + patch_exception(0x1e0, exc_instruction_tlb_miss_e6500_book3e); + break; + } + + pr_info("MMU: Book3E HW tablewalk %s\n", + book3e_htw_mode != PPC_HTW_NONE ? "enabled" : "not supported"); + + /* Set the global containing the top of the linear mapping + * for use by the TLB miss code + */ + linear_map_top = memblock_end_of_DRAM(); + + ioremap_bot = IOREMAP_BASE; +} + +static void __init early_mmu_set_memory_limit(void) +{ + /* + * Limit memory so we dont have linear faults. + * Unlike memblock_set_current_limit, which limits + * memory available during early boot, this permanently + * reduces the memory available to Linux. We need to + * do this because highmem is not supported on 64-bit. + */ + memblock_enforce_memory_limit(linear_map_top); + + memblock_set_current_limit(linear_map_top); +} + +/* boot cpu only */ +void __init early_init_mmu(void) +{ + early_init_mmu_global(); + early_init_this_mmu(); + early_mmu_set_memory_limit(); +} + +void early_init_mmu_secondary(void) +{ + early_init_this_mmu(); +} + +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + /* + * On FSL Embedded 64-bit, usually all RAM is bolted, but with + * unusual memory sizes it's possible for some RAM to not be mapped + * (such RAM is not used at all by Linux, since we don't support + * highmem on 64-bit). We limit ppc64_rma_size to what would be + * mappable if this memblock is the only one. Additional memblocks + * can only increase, not decrease, the amount that ends up getting + * mapped. We still limit max to 1G even if we'll eventually map + * more. This is due to what the early init code is set up to do. + * + * We crop it to the size of the first MEMBLOCK to + * avoid going over total available memory just in case... + */ + unsigned long linear_sz; + unsigned int num_cams; + + /* use a quarter of the TLBCAM for bolted linear map */ + num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4; + + linear_sz = map_mem_in_cams(first_memblock_size, num_cams, true, true); + ppc64_rma_size = min_t(u64, linear_sz, 0x40000000); + + /* Finally limit subsequent allocations */ + memblock_set_current_limit(first_memblock_base + ppc64_rma_size); +} diff --git a/arch/powerpc/mm/nohash/tlb_low_64e.S b/arch/powerpc/mm/nohash/tlb_low_64e.S index 7e0b8fe1c279..a54e7d6c3d0b 100644 --- a/arch/powerpc/mm/nohash/tlb_low_64e.S +++ b/arch/powerpc/mm/nohash/tlb_low_64e.S @@ -511,232 +511,6 @@ itlb_miss_fault_e6500: tlb_epilog_bolted b exc_instruction_storage_book3e -/********************************************************************** - * * - * TLB miss handling for Book3E with TLB reservation and HES support * - * * - **********************************************************************/ - - -/* Data TLB miss */ - START_EXCEPTION(data_tlb_miss) - TLB_MISS_PROLOG - - /* Now we handle the fault proper. We only save DEAR in normal - * fault case since that's the only interesting values here. - * We could probably also optimize by not saving SRR0/1 in the - * linear mapping case but I'll leave that for later - */ - mfspr r14,SPRN_ESR - mfspr r16,SPRN_DEAR /* get faulting address */ - srdi r15,r16,44 /* get region */ - xoris r15,r15,0xc - cmpldi cr0,r15,0 /* linear mapping ? */ - beq tlb_load_linear /* yes -> go to linear map load */ - cmpldi cr1,r15,1 /* vmalloc mapping ? */ - - /* The page tables are mapped virtually linear. At this point, though, - * we don't know whether we are trying to fault in a first level - * virtual address or a virtual page table address. We can get that - * from bit 0x1 of the region ID which we have set for a page table - */ - andis. r10,r15,0x1 - bne- virt_page_table_tlb_miss - - std r14,EX_TLB_ESR(r12); /* save ESR */ - std r16,EX_TLB_DEAR(r12); /* save DEAR */ - - /* We need _PAGE_PRESENT and _PAGE_ACCESSED set */ - li r11,_PAGE_PRESENT - oris r11,r11,_PAGE_ACCESSED@h - - /* We do the user/kernel test for the PID here along with the RW test - */ - srdi. r15,r16,60 /* Check for user region */ - - /* We pre-test some combination of permissions to avoid double - * faults: - * - * We move the ESR:ST bit into the position of _PAGE_BAP_SW in the PTE - * ESR_ST is 0x00800000 - * _PAGE_BAP_SW is 0x00000010 - * So the shift is >> 19. This tests for supervisor writeability. - * If the page happens to be supervisor writeable and not user - * writeable, we will take a new fault later, but that should be - * a rare enough case. - * - * We also move ESR_ST in _PAGE_DIRTY position - * _PAGE_DIRTY is 0x00001000 so the shift is >> 11 - * - * MAS1 is preset for all we need except for TID that needs to - * be cleared for kernel translations - */ - rlwimi r11,r14,32-19,27,27 - rlwimi r11,r14,32-16,19,19 - beq normal_tlb_miss_user - /* XXX replace the RMW cycles with immediate loads + writes */ -1: mfspr r10,SPRN_MAS1 - rlwinm r10,r10,0,16,1 /* Clear TID */ - mtspr SPRN_MAS1,r10 - beq+ cr1,normal_tlb_miss - - /* We got a crappy address, just fault with whatever DEAR and ESR - * are here - */ - TLB_MISS_EPILOG_ERROR - b exc_data_storage_book3e - -/* Instruction TLB miss */ - START_EXCEPTION(instruction_tlb_miss) - TLB_MISS_PROLOG - - /* If we take a recursive fault, the second level handler may need - * to know whether we are handling a data or instruction fault in - * order to get to the right store fault handler. We provide that - * info by writing a crazy value in ESR in our exception frame - */ - li r14,-1 /* store to exception frame is done later */ - - /* Now we handle the fault proper. We only save DEAR in the non - * linear mapping case since we know the linear mapping case will - * not re-enter. We could indeed optimize and also not save SRR0/1 - * in the linear mapping case but I'll leave that for later - * - * Faulting address is SRR0 which is already in r16 - */ - srdi r15,r16,44 /* get region */ - xoris r15,r15,0xc - cmpldi cr0,r15,0 /* linear mapping ? */ - beq tlb_load_linear /* yes -> go to linear map load */ - cmpldi cr1,r15,1 /* vmalloc mapping ? */ - - /* We do the user/kernel test for the PID here along with the RW test - */ - li r11,_PAGE_PRESENT|_PAGE_BAP_UX /* Base perm */ - oris r11,r11,_PAGE_ACCESSED@h - - srdi. r15,r16,60 /* Check for user region */ - std r14,EX_TLB_ESR(r12) /* write crazy -1 to frame */ - beq normal_tlb_miss_user - - li r11,_PAGE_PRESENT|_PAGE_BAP_SX /* Base perm */ - oris r11,r11,_PAGE_ACCESSED@h - /* XXX replace the RMW cycles with immediate loads + writes */ - mfspr r10,SPRN_MAS1 - rlwinm r10,r10,0,16,1 /* Clear TID */ - mtspr SPRN_MAS1,r10 - beq+ cr1,normal_tlb_miss - - /* We got a crappy address, just fault */ - TLB_MISS_EPILOG_ERROR - b exc_instruction_storage_book3e - -/* - * This is the guts of the first-level TLB miss handler for direct - * misses. We are entered with: - * - * r16 = faulting address - * r15 = region ID - * r14 = crap (free to use) - * r13 = PACA - * r12 = TLB exception frame in PACA - * r11 = PTE permission mask - * r10 = crap (free to use) - */ -normal_tlb_miss_user: -#ifdef CONFIG_PPC_KUAP - mfspr r14,SPRN_MAS1 - rlwinm. r14,r14,0,0x3fff0000 - beq- normal_tlb_miss_access_fault /* KUAP fault */ -#endif -normal_tlb_miss: - /* So we first construct the page table address. We do that by - * shifting the bottom of the address (not the region ID) by - * PAGE_SHIFT-3, clearing the bottom 3 bits (get a PTE ptr) and - * or'ing the fourth high bit. - * - * NOTE: For 64K pages, we do things slightly differently in - * order to handle the weird page table format used by linux - */ - srdi r15,r16,44 - oris r10,r15,0x1 - rldicl r14,r16,64-(PAGE_SHIFT-3),PAGE_SHIFT-3+4 - sldi r15,r10,44 - clrrdi r14,r14,19 - or r10,r15,r14 - - ld r14,0(r10) - -finish_normal_tlb_miss: - /* Check if required permissions are met */ - andc. r15,r11,r14 - bne- normal_tlb_miss_access_fault - - /* Now we build the MAS: - * - * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG - * MAS 1 : Almost fully setup - * - PID already updated by caller if necessary - * - TSIZE need change if !base page size, not - * yet implemented for now - * MAS 2 : Defaults not useful, need to be redone - * MAS 3+7 : Needs to be done - * - * TODO: mix up code below for better scheduling - */ - clrrdi r10,r16,12 /* Clear low crap in EA */ - rlwimi r10,r14,32-19,27,31 /* Insert WIMGE */ - mtspr SPRN_MAS2,r10 - - /* Check page size, if not standard, update MAS1 */ - rldicl r10,r14,64-8,64-8 - cmpldi cr0,r10,BOOK3E_PAGESZ_4K - beq- 1f - mfspr r11,SPRN_MAS1 - rlwimi r11,r14,31,21,24 - rlwinm r11,r11,0,21,19 - mtspr SPRN_MAS1,r11 -1: - /* Move RPN in position */ - rldicr r11,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT - clrldi r15,r11,12 /* Clear crap at the top */ - rlwimi r15,r14,32-8,22,25 /* Move in U bits */ - rlwimi r15,r14,32-2,26,31 /* Move in BAP bits */ - - /* Mask out SW and UW if !DIRTY (XXX optimize this !) */ - andi. r11,r14,_PAGE_DIRTY - bne 1f - li r11,MAS3_SW|MAS3_UW - andc r15,r15,r11 -1: - srdi r16,r15,32 - mtspr SPRN_MAS3,r15 - mtspr SPRN_MAS7,r16 - - tlbwe - -normal_tlb_miss_done: - /* We don't bother with restoring DEAR or ESR since we know we are - * level 0 and just going back to userland. They are only needed - * if you are going to take an access fault - */ - TLB_MISS_EPILOG_SUCCESS - rfi - -normal_tlb_miss_access_fault: - /* We need to check if it was an instruction miss */ - andi. r10,r11,_PAGE_BAP_UX - bne 1f - ld r14,EX_TLB_DEAR(r12) - ld r15,EX_TLB_ESR(r12) - mtspr SPRN_DEAR,r14 - mtspr SPRN_ESR,r15 - TLB_MISS_EPILOG_ERROR - b exc_data_storage_book3e -1: TLB_MISS_EPILOG_ERROR - b exc_instruction_storage_book3e - - /* * This is the guts of the second-level TLB miss handler for direct * misses. We are entered with: @@ -893,201 +667,6 @@ virt_page_table_tlb_miss_whacko_fault: TLB_MISS_EPILOG_ERROR b exc_data_storage_book3e - -/************************************************************** - * * - * TLB miss handling for Book3E with hw page table support * - * * - **************************************************************/ - - -/* Data TLB miss */ - START_EXCEPTION(data_tlb_miss_htw) - TLB_MISS_PROLOG - - /* Now we handle the fault proper. We only save DEAR in normal - * fault case since that's the only interesting values here. - * We could probably also optimize by not saving SRR0/1 in the - * linear mapping case but I'll leave that for later - */ - mfspr r14,SPRN_ESR - mfspr r16,SPRN_DEAR /* get faulting address */ - srdi r11,r16,44 /* get region */ - xoris r11,r11,0xc - cmpldi cr0,r11,0 /* linear mapping ? */ - beq tlb_load_linear /* yes -> go to linear map load */ - cmpldi cr1,r11,1 /* vmalloc mapping ? */ - - /* We do the user/kernel test for the PID here along with the RW test - */ - srdi. r11,r16,60 /* Check for user region */ - ld r15,PACAPGD(r13) /* Load user pgdir */ - beq htw_tlb_miss - - /* XXX replace the RMW cycles with immediate loads + writes */ -1: mfspr r10,SPRN_MAS1 - rlwinm r10,r10,0,16,1 /* Clear TID */ - mtspr SPRN_MAS1,r10 - ld r15,PACA_KERNELPGD(r13) /* Load kernel pgdir */ - beq+ cr1,htw_tlb_miss - - /* We got a crappy address, just fault with whatever DEAR and ESR - * are here - */ - TLB_MISS_EPILOG_ERROR - b exc_data_storage_book3e - -/* Instruction TLB miss */ - START_EXCEPTION(instruction_tlb_miss_htw) - TLB_MISS_PROLOG - - /* If we take a recursive fault, the second level handler may need - * to know whether we are handling a data or instruction fault in - * order to get to the right store fault handler. We provide that - * info by keeping a crazy value for ESR in r14 - */ - li r14,-1 /* store to exception frame is done later */ - - /* Now we handle the fault proper. We only save DEAR in the non - * linear mapping case since we know the linear mapping case will - * not re-enter. We could indeed optimize and also not save SRR0/1 - * in the linear mapping case but I'll leave that for later - * - * Faulting address is SRR0 which is already in r16 - */ - srdi r11,r16,44 /* get region */ - xoris r11,r11,0xc - cmpldi cr0,r11,0 /* linear mapping ? */ - beq tlb_load_linear /* yes -> go to linear map load */ - cmpldi cr1,r11,1 /* vmalloc mapping ? */ - - /* We do the user/kernel test for the PID here along with the RW test - */ - srdi. r11,r16,60 /* Check for user region */ - ld r15,PACAPGD(r13) /* Load user pgdir */ - beq htw_tlb_miss - - /* XXX replace the RMW cycles with immediate loads + writes */ -1: mfspr r10,SPRN_MAS1 - rlwinm r10,r10,0,16,1 /* Clear TID */ - mtspr SPRN_MAS1,r10 - ld r15,PACA_KERNELPGD(r13) /* Load kernel pgdir */ - beq+ htw_tlb_miss - - /* We got a crappy address, just fault */ - TLB_MISS_EPILOG_ERROR - b exc_instruction_storage_book3e - - -/* - * This is the guts of the second-level TLB miss handler for direct - * misses. We are entered with: - * - * r16 = virtual page table faulting address - * r15 = PGD pointer - * r14 = ESR - * r13 = PACA - * r12 = TLB exception frame in PACA - * r11 = crap (free to use) - * r10 = crap (free to use) - * - * It can be re-entered by the linear mapping miss handler. However, to - * avoid too much complication, it will save/restore things for us - */ -htw_tlb_miss: -#ifdef CONFIG_PPC_KUAP - mfspr r10,SPRN_MAS1 - rlwinm. r10,r10,0,0x3fff0000 - beq- htw_tlb_miss_fault /* KUAP fault */ -#endif - /* Search if we already have a TLB entry for that virtual address, and - * if we do, bail out. - * - * MAS1:IND should be already set based on MAS4 - */ - PPC_TLBSRX_DOT(0,R16) - beq htw_tlb_miss_done - - /* Now, we need to walk the page tables. First check if we are in - * range. - */ - rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4 - bne- htw_tlb_miss_fault - - /* Get the PGD pointer */ - cmpldi cr0,r15,0 - beq- htw_tlb_miss_fault - - /* Get to PGD entry */ - rldicl r11,r16,64-(PGDIR_SHIFT-3),64-PGD_INDEX_SIZE-3 - clrrdi r10,r11,3 - ldx r15,r10,r15 - cmpdi cr0,r15,0 - bge htw_tlb_miss_fault - - /* Get to PUD entry */ - rldicl r11,r16,64-(PUD_SHIFT-3),64-PUD_INDEX_SIZE-3 - clrrdi r10,r11,3 - ldx r15,r10,r15 - cmpdi cr0,r15,0 - bge htw_tlb_miss_fault - - /* Get to PMD entry */ - rldicl r11,r16,64-(PMD_SHIFT-3),64-PMD_INDEX_SIZE-3 - clrrdi r10,r11,3 - ldx r15,r10,r15 - cmpdi cr0,r15,0 - bge htw_tlb_miss_fault - - /* Ok, we're all right, we can now create an indirect entry for - * a 1M or 256M page. - * - * The last trick is now that because we use "half" pages for - * the HTW (1M IND is 2K and 256M IND is 32K) we need to account - * for an added LSB bit to the RPN. For 64K pages, there is no - * problem as we already use 32K arrays (half PTE pages), but for - * 4K page we need to extract a bit from the virtual address and - * insert it into the "PA52" bit of the RPN. - */ - rlwimi r15,r16,32-9,20,20 - /* Now we build the MAS: - * - * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG - * MAS 1 : Almost fully setup - * - PID already updated by caller if necessary - * - TSIZE for now is base ind page size always - * MAS 2 : Use defaults - * MAS 3+7 : Needs to be done - */ - ori r10,r15,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT) - - srdi r16,r10,32 - mtspr SPRN_MAS3,r10 - mtspr SPRN_MAS7,r16 - - tlbwe - -htw_tlb_miss_done: - /* We don't bother with restoring DEAR or ESR since we know we are - * level 0 and just going back to userland. They are only needed - * if you are going to take an access fault - */ - TLB_MISS_EPILOG_SUCCESS - rfi - -htw_tlb_miss_fault: - /* We need to check if it was an instruction miss. We know this - * though because r14 would contain -1 - */ - cmpdi cr0,r14,-1 - beq 1f - mtspr SPRN_DEAR,r16 - mtspr SPRN_ESR,r14 - TLB_MISS_EPILOG_ERROR - b exc_data_storage_book3e -1: TLB_MISS_EPILOG_ERROR - b exc_instruction_storage_book3e - /* * This is the guts of "any" level TLB miss handler for kernel linear * mapping misses. We are entered with: -- 2.44.0
