Re: [PATCH v15 09/20] KVM: SEV: Add support to handle MSR based Page State Change VMGEXIT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 5/17/2024 1:23 AM, Paolo Bonzini wrote:
On Thu, May 16, 2024 at 10:29 AM Binbin Wu <binbin.wu@xxxxxxxxxxxxxxx> wrote:


On 5/1/2024 4:51 PM, Michael Roth wrote:
SEV-SNP VMs can ask the hypervisor to change the page state in the RMP
table to be private or shared using the Page State Change MSR protocol
as defined in the GHCB specification.

When using gmem, private/shared memory is allocated through separate
pools, and KVM relies on userspace issuing a KVM_SET_MEMORY_ATTRIBUTES
KVM ioctl to tell the KVM MMU whether or not a particular GFN should be
backed by private memory or not.

Forward these page state change requests to userspace so that it can
issue the expected KVM ioctls. The KVM MMU will handle updating the RMP
entries when it is ready to map a private page into a guest.

Use the existing KVM_HC_MAP_GPA_RANGE hypercall format to deliver these
requests to userspace via KVM_EXIT_HYPERCALL.

Signed-off-by: Michael Roth <michael.roth@xxxxxxx>
Co-developed-by: Brijesh Singh <brijesh.singh@xxxxxxx>
Signed-off-by: Brijesh Singh <brijesh.singh@xxxxxxx>
Signed-off-by: Ashish Kalra <ashish.kalra@xxxxxxx>
---
   arch/x86/include/asm/sev-common.h |  6 ++++
   arch/x86/kvm/svm/sev.c            | 48 +++++++++++++++++++++++++++++++
   2 files changed, 54 insertions(+)

diff --git a/arch/x86/include/asm/sev-common.h b/arch/x86/include/asm/sev-common.h
index 1006bfffe07a..6d68db812de1 100644
--- a/arch/x86/include/asm/sev-common.h
+++ b/arch/x86/include/asm/sev-common.h
@@ -101,11 +101,17 @@ enum psc_op {
       /* GHCBData[11:0] */                            \
       GHCB_MSR_PSC_REQ)

+#define GHCB_MSR_PSC_REQ_TO_GFN(msr) (((msr) & GENMASK_ULL(51, 12)) >> 12)
+#define GHCB_MSR_PSC_REQ_TO_OP(msr) (((msr) & GENMASK_ULL(55, 52)) >> 52)
+
   #define GHCB_MSR_PSC_RESP           0x015
   #define GHCB_MSR_PSC_RESP_VAL(val)                  \
       /* GHCBData[63:32] */                           \
       (((u64)(val) & GENMASK_ULL(63, 32)) >> 32)

+/* Set highest bit as a generic error response */
+#define GHCB_MSR_PSC_RESP_ERROR (BIT_ULL(63) | GHCB_MSR_PSC_RESP)
+
   /* GHCB Hypervisor Feature Request/Response */
   #define GHCB_MSR_HV_FT_REQ          0x080
   #define GHCB_MSR_HV_FT_RESP         0x081
diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index e1ac5af4cb74..720775c9d0b8 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -3461,6 +3461,48 @@ static void set_ghcb_msr(struct vcpu_svm *svm, u64 value)
       svm->vmcb->control.ghcb_gpa = value;
   }

+static int snp_complete_psc_msr(struct kvm_vcpu *vcpu)
+{
+     struct vcpu_svm *svm = to_svm(vcpu);
+
+     if (vcpu->run->hypercall.ret)
Do we have definition of ret? I didn't find clear documentation about it.
According to the code, 0 means succssful. Is there any other error codes
need to or can be interpreted?
They are defined in include/uapi/linux/kvm_para.h

#define KVM_ENOSYS        1000
#define KVM_EFAULT        EFAULT /* 14 */
#define KVM_EINVAL        EINVAL /* 22 */
#define KVM_E2BIG        E2BIG /* 7 */
#define KVM_EPERM        EPERM /* 1*/
#define KVM_EOPNOTSUPP        95

Linux however does not expect the hypercall to fail for SEV/SEV-ES; and
it will terminate the guest if the PSC operation fails for SEV-SNP.  So
it's best for userspace if the hypercall always succeeds. :)
Thanks for the info.

For TDX, it wants to restrict the size of memory range for conversion in one hypercall to avoid a too long latency. Previously, in TDX QEMU patchset v5, the limitation is in userspace and  if the size is too big, the status_code will set to TDG_VP_VMCALL_RETRY and the failed GPA for guest to retry is updated.
https://lore.kernel.org/all/20240229063726.610065-51-xiaoyao.li@xxxxxxxxx/

When TDX converts TDVMCALL_MAP_GPA to KVM_HC_MAP_GPA_RANGE, do you think which is more reasonable to set the restriction? In KVM (TDX specific code) or userspace? If userspace is preferred, then the interface needs to  be extended to support it.



For TDX, it may also want to use KVM_HC_MAP_GPA_RANGE hypercall  to
userspace via KVM_EXIT_HYPERCALL.
Yes, definitely.

Paolo






[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux