Re: [RFC PATCH 2/2] mm: introduce budgt control in readahead

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, May 11, 2024 at 3:35 PM Zhaoyang Huang <huangzhaoyang@xxxxxxxxx> wrote:
>
> On Fri, May 10, 2024 at 11:18 AM Matthew Wilcox <willy@xxxxxxxxxxxxx> wrote:
> >
> > On Fri, May 10, 2024 at 10:43:20AM +0800, Zhaoyang Huang wrote:
> > > Thanks for the prompt. I did some basic research on soft RAID and
> > > wonder if applying the bps limit on /dev/md0 like below could make
> > > this work.
> >
> > No.  Look at btrfs' raid support, for example.  it doesn't use md0.
> If I understand the below command correctly, btrfs uses one of the
> volumes within RAID as the mount block device, not /dev/md0. However,
> I think this is a problem of blkio.throttle rather than this commit
> which means this readahead budget control will work accordingly as
> long as blkio.throttle's parameter is configured correctly(eg. 50/50
> on sdb and sdc)
>
> mkfs.btrfs -m raid0 -d raid0 /dev/sdb /dev/sdc
> mount -t btrfs /dev/sdb /mnt/btr
>
>
>
> >
> > > I didn't find information about 'RAID internally'. Could we set the
> > > limit on the root device(the one used for mount) to manage the whole
> > > partition without caring about where the bio finally goes? Or ask the
> > > user to decide if to use by making sure the device they apply will not
> > > do RAID?
> >
> > No.

@all, Please find below for more test results where we can find this
commit has the result meet the desired value more closely and enhance
it by 3% than mainline.

echo "254:48 20000000" > blkio.throttle.read_bps_device
fio -filename=/data/ylog/ap/000-0101_000015_poweron.ylog -rw=read
-direct=0 -bs=4k -size=2000M -numjobs=8 -group_reporting -name=mytest

    before : IOPS=37.9k, BW=148MiB/s (155MB/s)(11.6GiB/80333msec)
    after  : IOPS=39.0k, BW=153MiB/s (160MB/s)(15.6GiB/104914msec)

    before : clat (usec): min=4, max=1056.6k, avg=197.23, stdev=10080.69
    after  : clat (usec): min=4, max=193481, avg=188.83, stdev=4651.29

    before : lat (usec): min=5, max=1056.6k, avg=200.48, stdev=10080.76
    after  : lat (usec): min=5, max=193483, avg=192.68, stdev=4651.87


echo "254:48 30000000" > blkio.throttle.read_bps_device
fio -filename=/data/ylog/ap/000-0101_000015_poweron.ylog -rw=read
-direct=0 -bs=4k -size=2000M -numjobs=8 -group_reporting -name=mytest

    before : IOPS=57.2k, BW=224MiB/s (234MB/s)(15.6GiB/71561msec)
    after  : IOPS=58.5k, BW=229MiB/s (240MB/s)(15.6GiB/69996msec)

    before : clat (usec): min=4, max=1105.5k, avg=126.20, stdev=6419.22
    after  : clat (usec): min=4, max=183956, avg=120.60, stdev=2957.28

    before : lat (usec): min=5, max=1105.5k, avg=129.45, stdev=6419.29
    after  : lat (usec): min=5, max=183958, avg=124.40, stdev=2958.18





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux